want to upgrade from my two jl 12w6v2 to a Fi Bl15

[Damien02 0]

Hello all

my daily ride is a mercedes clk 230 Kompressor and my setup is two jl audio 12w6v2 sealed off a jl audio 1000/1....

very good SQ and output level not bad but............. i want morrrrrrrrrrreeeeeee

So i'm interrested by Fi audio ! i can make a box of 3.5 cu ft maximum (volume net)

a Fi Bl15 ported in a 3 cu ft tune to 32-34hz seem to be a good thing!! the 15" will be powered by my 1000/1 (1100-1200wrms)

i think upgrade my amp soon and take a 2000wrms

good choice?

Damien

[JimJ 11]

Honestly, to me that'd be a downgrade.

But JMHO.

[Aaron Clinton 2,372]

Usually the best practice is to port that box before buying new equipment.

[///M5 2,833]

Not that I need them, but you could sell me the w6's cheap.

[johnecon2001 82]

What are you looking to achieve here? When you say you want more, do you mean more volume? Because you'll probably get more volume with the BL's in a ported box, but they won't sound near as good as the W6's. Do what denim suggested and build a ported box for the W6's and see if that cures your bass hunger.

If it doesn't and you still want more, orrrr you just want to change your setup, look into the Q instead of the BL.

[Damien02 0]

hello

thanks for your answer!

yes the SQ of the 12w6v2 is awezome ...i don't want to go ported for this sub!! sealed seem to be the best use for it .

i'll look to a pair of 12" Q .... may be