Search the Community
Showing results for tags 'Dust cap'.
Found 2 results
-
I recently reconed my BTL UFO 12" with high xmax option. I used the spacers provided to space the basket .250" above the bump in the motor. I first knocked the dust cap off in a huge box I had made for my zcon. 3.1 cu ft. tuned to 32. Glued it back up and I did it again. I built a new box because I thought big box, over powering, exc. could have been the cause. Plus it didn't sound that great (anticipated) I have a box made.. 2.4 cu ft. tuned to 32. Knocked the dust cap off again today. I am using household goop to glue the dust cap. Should I go with CA? Possibility that the recone was not made to be spaced from the motor?
-
on my sundown sa 8 v.2 the dust cap gets really hot? is this caused by the voice coil being hot also why does it tend to clip (bottom out) when its straight up more then it does down or at a 45 degree angle? i have this in a .28 cubic foot sealed box in a apk 2500 watt amp and i cant figure out how to get it to sound crisp and clean
