Search the Community
Showing results for tags 'Box Building'.
Found 3 results
-
Hi guys I'm new to the forum and this is my first post. I just started out building my own boxes for the past 2 years now and need some assistance on this new build. Attached is the pictures of the box in progress. Can anyone assist me with port tuning (I'm from south africa so in cm would be great). The dimensions are : Height 41.5cm Length 90.5cm Width 45.5cm Sub mounting height 17cm All wood is 20mm plywood What is my current port tuned at 52.5cm port running in an L shape in the box 5.4cm width Length 41.5cm pictures attached The sub mounting height is basically the walls around it. Thanks for the time
-
Hi Guys, Hope you are all well and i aslo hope that some one can assist me with working out the correct spec for a true SPL box. please note I will only be doing SPL with this box. Ok so I have 18mm ply wood, 1 12inch subwoofer, 1 amplifier and 1 battery. Here's what i'd like to do Get a minimum of 151db's from this setup Equipment DD Z1a NSB 170 12v Targa TG301-DW The sub specs are as follows and i could be wrong because this is taken directly from the site. 12" COMP SUBWOOFER - DUAL 1 SPECIFICATIONS Fs (free air resonance): 48.7 Hz SPL (efficiency, 1W/1M): 89 dB Nominal Inpedance: 1/2 Ω Qts (total speaker "Q"): 0.606 Qes (electrical "Q"): 0.732 Qms (mechanical "Q"): 3.517 Vas (equivalent compliance): 20.84 L Mounting Depth: 195 mm Mounting Hole Diameter: 300 mm RMS (Watts): 2 x 1500W RMS My Vehicle Opel Corsa Lite + Resonant Frequency 54Hz Current Box Box Properties Name: Type: Vented Box w/ Active HP Filter Shape: Pyramid, truncated Vb = 101.9 liters Fb = 53.99 Hz Fill = none No. of Vents = 1 Vent shape = round Vent ends = two flared Dv = 247.9 mm Lv = 290 mm I would like to go slot port, i would like to increase on my number and i have already done the Big 3, deadening, and alternator upgrade. Your help will be more than appreciated
-
Hi Guys, Hope you are all well and i aslo hope that some one can assist me with working out the correct spec for a true SPL box. please note I will only be doing SPL with this box. Ok so I have 18mm ply wood, 1 12inch subwoofer, 1 amplifier and 1 battery. Here's what i'd like to do Get a minimum of 151db's from this setup Equipment DD Z1a NSB 170 12v Targa TG301-DW The sub specs are as follows and i could be wrong because this is taken directly from the site. 12" COMP SUBWOOFER - DUAL 1 SPECIFICATIONS Fs (free air resonance): 48.7 Hz SPL (efficiency, 1W/1M): 89 dB Nominal Inpedance: 1/2 Ω Qts (total speaker "Q"): 0.606 Qes (electrical "Q"): 0.732 Qms (mechanical "Q"): 3.517 Vas (equivalent compliance): 20.84 L Mounting Depth: 195 mm Mounting Hole Diameter: 300 mm RMS (Watts): 2 x 1500W RMS My Vehicle Opel Corsa Lite + Resonant Frequency 54Hz Current Box Box Properties Name: Type: Vented Box w/ Active HP Filter Shape: Pyramid, truncated Vb = 101.9 liters Fb = 53.99 Hz Fill = none No. of Vents = 1 Vent shape = round Vent ends = two flared Dv = 247.9 mm Lv = 290 mm I would like to go slot port, i would like to increase on my number and i have already done the Big 3, deadening, and alternator upgrade. Your help will be more than appreciated Thank you and enjoy.
