firey_kimchi

Thanks for the link! I'm looking for the 4 ohm version but they're out of stock. Anyone have any sitting around collecting dust that they'd want to part with?

So I loaded this in my wagon this weekend. I have it hooked up to an old school US Amps 200 while I wait for the Kicker ZR600 to get recapped. The enclosure is 1.1 ft^3 sealed. HOLY CRAP...The ICON shook the bolts off my wagon! I have all kinds of new things rattling that I need to fix now. Even with the triple front baffle, double rear baffle, and internal bracing it vibrates all over the place. I'm going to have to bolt it to the car. I can't wait for it to break in. I've already got plans to build a ported enclosure to see the difference in output. This is an awesome sub!

Here are some pics of the box. I still have to insert the t-nuts and fill in the screw holes. I think it'll be pretty sturdy for the ICON.

Good news... I got the Kicker ZR600 today. It looks awesome! The first thing I did was take the bottom cover off and inspected the guts...beautiful! I hooked up the DMM and o-scope and set the gain. I set it to 60V (it didn't start to clip until around 70'ish). I hooked it up to the ICON and did some freeair. WOW!!! This is going to be great. Now for the not great news but I can deal with it news... When the ICON was digging deep, I heard some squeaky/whining noises coming from the amp. I still had the bottom cover off and it was elevated so I could hear it well. It sounded like it was coming from the caps in the center of the board. I emailed a guy that's going to fix my ZR1000 to see if he could verify what the issue/noise is and fix it. I can understand if the caps are going bad. This is an older amp. Anyways, I should have this up and running once the ZR600 gets "touched up". On with the pics...

Well, the USA 2300 was going to be the amp but USPS lost it. Yep! I sent it to Audio Clinic (Mike Nicholls) for refurbishment. He shipped it back to me in the middle of Dec (Mike sent the receipt, tracking number, etc). It never arrived and is not showing scanned in their system. USPS is blaming the military. The Military Postal Service Agency said they never received the item from USPS. It's a nightmare! Mike has been great with communication and going to the post office and trying to get a resolution. I have nothing but good things to say about him. So, I just bought a mint Kicker ZR600 from Japan (They really take care of their stuff!). I can't wait for it to all come together and unleash the ICON!

Very Nice! Just when I'm about to get out you pull me back in. Sign me up for a pair...

I have 4 original DCON 12s (D4) NIB if anyone's interested. I had a build planned but that was a while ago. Besides, I found on original ICON and will be using that now. You gotta love SSA subs!

Life got in the way (daughter got sick and then the wife and then me) and postponed my build until this weekend. Just finished glueing and screwing MDF. I doubled up the rear and front panels and added a third on the front for a flush mount. The cutout diameter in the sketch ups state 11 3/16", which was a little big. I think I should've used the specs on the website (11.150") and sanded it down. I'll remember that for the ported box next time. I have 2 pieces cross-bracing the sides (2 top-to-bottom and 2 left-to-right). I'm going to use T-nuts to secure the ICON. Waiting for glue to dry to finish the enclosure... In the meantime, I hooked up the ICON to the PC1400...I have to say I was a little disappointed. It was not very powerful like I had imagined it would be. I think it was only getting the 400W @4. I think I've narrowed my amp choices down to the US Amps PT-1100, US Acoustics 2300, or Kicker ZR600. I have a ZR1000 but it's getting repaired and think that might be too much of a power drain for a daily driver. The ZR600 should be plenty if I go that route. Any advice on which amp I should run? I'll post some pics once it's all together.

The wood I ordered just came in to make the enclosure. I should have this thing built by the end of this weekend. After talking with Aaron, I'm going to use a double baffle and add some internal bracing. I'll post pics after it's built.

Welcome! I loved the old Kicker Solo Barics, ZR amps, and Resolutions. I've had about 12 Solo Barics, in different sizes, throughout the years. You'll have to show us some pics when it's completed.

Do you still have the Exodus Anarchy mids? Are they 4 or 8 ohm?

That's awesome! Merry Christmas, too! SQUIRREL!!!!!

**Disclaimer: I'm not an expert and just did this with what I've read on multiple forums** Hopefully, it makes sense to everyone. So, I had some spare time to kill and decided to experiment with the ICON. I have multiple amps sitting around so I thought I'd try 2 different 1999 model US Amps (USA-100 and Xterminator 100X) to see how the 3.1 ohm load reacted with the 1 ohm and 2 ohm stable amps. The USA-100 is 1 ohm stable and the Xterminator 100X is 2 ohm stable. Both plexiglass covers were removed (I like them this way to increase airflow potential). My Audio Authority 978 (60A) power supply was reading 13.8V and I set the gains on both amps using a 40Hz test tone on my iPod and my TPI Scope Plus 440 Oscilloscope. Both gains were set until I saw clipping and then backed off to the nearest whole number. I played the same 3 songs on the ICON freeair: Bass Mekanik-808 Tune Up, Flosstradamus- Ith, and Basstronics- Bass, I Love You). Each testing lasted about 12 mins total. Known factors: USA-100: 19V per channel/ 38.5V bridged Xterminator 100X: 24V per channel/ 48.8V bridged ICON (wired in series): 3.1 ohms Using Ohm's Law, I found the amps: USA-100: 19V / 3.1 Ohms = 6.13A, 38.5V / 3.1 = 12.42A Xterminator 100X: 24V / 3.1 Ohms = 7.74A, 48.8V / 3.1 = 15.74A Now that I had the volts and amps, I could see how much power was being output: USA-100: 19V x 6.13A = 116.5W/channel, 38.5V x 12.42A = 478W bridged Xterminator 100X: 24V x 7.74A = 186W/channel, 48.8V x 15.74A = 768W bridged The USA-100 was very warm. I tried to measure the ohm load when music was playing but it read 8.7 ohms at the amp and sub. I must have done something wrong. The bass was there but it didn't seem loud enough. The Xterminator 100X was hot enough to fry an egg! Again, I tried to measure the ohm load and it read .585 ohm so I wasn't doing something right. The ICON performed better on this amp and the bass was noticeably louder. Based off this experiment, I think the PPI PC1400 won't be as loud as the US Amps PT-1100. I just hope the ICON doesn't fry the PT-1100's Tripath chip at 4 ohm bridged. Let me know if any of my calculations are off or I screwed up anything.

BLUF: Is the ICON D2 regarded more as a 4 ohm or 3 ohm when wired in series? Quick question...Will the coil resistance increase with music playing? Since the coils read 1.5 ohms (3.1 ohms in series), would this be better on a 4 ohm mono or 2 ohm mono stable amp? If the PPI PC1400 sees a 4 ohm load, it will only put out 400W @4 mono. I also thought about powering it with a US Amps PT-1100 (2 ohm stable/ 1000x1 @ 4 bridged) but am worried if the ohm load is too low (3.1 ohms bridged...1.5 ohms), it will damage the amp. Thanks for the help and happy holidays!

Sorry guys, I'm keeping this one! I had a custom built US Amps DE-500 on it and it was moving!!! Can't wait to see what the PC1400 will do to it.

I forgot to mention that it's going in a JDM 2000 Subaru Legacy GT Wagon (Twin Turbo), stock alternator (100A), Bosch Hightec Premium AGM batt, and big 3 (1/0). I just remembered that I have a PPI PC1400 (800 x 1 @ 2 ohm mono...so maybe 600 x 1 @ 3 ohm mono?) that might work, too. Any suggestions?

Aloha and welcome!

Yes, I'm looking for gaskets for 2 of my 4 Orphans. I removed the Orphans from the car a few months ago and during the last typhoon, one of the boxes was sitting in water overnight. The carpeting was soaked. No damage to the subs but I don't trust the box integrity anymore. I split the Orphan's up and made 2 smaller boxes. Shipping would be to a military APO AP address (96367). USPS is the preferred shipping carrier based on prices.

Looking for 8" mounting gaskets for SoundSplinter Orphan 8 or Rl-i8

I've got pairs of Digital Design 6.5 LT, (NIB) O/S Kicker Competition 6.5c, O/S Kicker Competition 8c, and O/S Kicker Solobaric S8d if you're interested.

I'm finally going to put my 2 TC Sounds OEM 10's to work. I have 2 10" matching passive radiators that I'm going to use, too. I usually go sealed, but want to try these out ported (so to speak). I was going to build one box with 2 separate chambers to specs (.6 ft^3 each) but was wondering if I could just use 1 common chamber (1.2 ft^3)? Another idea would be to get another passive radiator so I'd have 3 total for 2 subs in a common chamber? Would this be better than the 2 (I heard that you should have a bigger sized passive radiator than the woofer)? All inputs are greatly appreciated. Here's my current set up: 2000 (JDM) Subaru Legacy GT Twin Turbo Wagon Yellow Top Optima Battery (up front) 190A Singer alternator Big 3 (0 gauge) HU: Alpine CDA-9887 Front Doors: Kicker ND25 Tweeters & Kicker 5 1/2 Resolutions Amp: US Amps USA-100 Subs: 4 Orphan 8's Sub Amps: 2 US Amps USA-200s

I finally finished the enclosure a couple weeks ago and installed everything. It's 36x14x14 (24mm MDF)...2.67 ft^3 which is about 1.3 ft^3 per sub. I hooked everything up and it sounds pretty good on some songs but I know it can get lower. I don't know what the frequency is currently. I don't have any washers or nuts on the PRs. I need to tune it but don't quite know how to tune PRs. I don't have the ability to look at winisd (I have a mac). Any help would be appreciated. I've attached the T/S for the OEMs and VMPs: TSP's Qts 0.357 Qes 0.400 Qms 3.35 Fs 30Hz Res 3.11 ohms Ls 4.0 mH Lp 6.26 mH Rp 9.9 ohms Dia 208mm Vas 19.3 liters Mms 224 grams Cms 119 um/N BL 18.35Tm Spl 83.3dB VMP TSP's Qms Variable Fs Variable Dia 208mm Mms (unloaded) 370 grams Cms 180 um/N Nut mass 175grams Washer mass (each) 80 grams

So...I'm almost finished building the box. I decided to use 2 OEMs and 2 PRs. The subs are inverted. It's 34x14x14 and made with 24mm MDF. That's about 2.7 ft^3 total (1.36 ft^3 per sub). I think I need to put a brace in the middle to keep the top from sagging with all that weight. I used t-nuts for all the subs/PRs because I'll be taking them in/out trying to get the tuning done. I still need to sand and paint but that can wait. I'll get pics up soon.

Does anyone have the older optimal enclosure sketch-ups for dual 12" DCONs (originals)? I can't find them anywhere.