CrownVic

Thats a sweet product.

I'm sorry, but they are the worst tool for measuring. This is exactly what I am talking about in the previous posts. You see it acting differently and pick arbitrary numbers out of the air , insert, and bam. See what I'm getting at? Isn't that how you measure all the time. You measure with your eyes when you need to stop your car so you don't wreck. How far to step so you don't fall down the stairs. What size a bolt is so you can get the right size wrench. I don't carry a pucking ruler in my back pocket nor do I care too. See what I'm getting at? I noticed a very audible difference as well. At full tilt my truck is quiet as shit on the outside with the windows up. The problem is your eye is not sensitive enough to he used as a measuring device for panel movement. It's akin to stating you could measure a driver's excursion by eye. Audible differences are a given, but you are already perceiving a change so you brain has already signaled there will be a change whether there is or not. Is it really that horrible of a product if he bought the shit to make his roof stop rattling and it worked, ive heard his truck at full tilt and it is pretty damn quiet for the huge sub stage. He bought it to stop rattles, applied it properly and it has served his purpose, no need to split hairs and try to discredit what he experienced. This is such a dead horse, why spend this much time worrying about it? I'm not worried about anything. He just proved my point I made earlier. Yes, the stuff made a difference, but what amount. I was not questioning the difference, I questioned his numbers stated and methods of measurement. It's simply perception. He percieved a difference; his mind had already made that decision for him. I understand why you would suspect that, but to say it as if its fact and there's no way it could possibly have happened just shows an automatic bias. Your hastening to doubt a product that you've never seen, heard, or used just because of one bad batch? After the owner gave OP team pricing (real team member), and offered to send more or refund his money, I really don't see the problem. No ones claiming its the best, but to automatically assume its useless junk is a bold statement not supported by facts.

I'm sorry, but they are the worst tool for measuring. This is exactly what I am talking about in the previous posts. You see it acting differently and pick arbitrary numbers out of the air , insert, and bam. See what I'm getting at? Isn't that how you measure all the time. You measure with your eyes when you need to stop your car so you don't wreck. How far to step so you don't fall down the stairs. What size a bolt is so you can get the right size wrench. I don't carry a pucking ruler in my back pocket nor do I care too. See what I'm getting at? I noticed a very audible difference as well. At full tilt my truck is quiet as shit on the outside with the windows up. The problem is your eye is not sensitive enough to he used as a measuring device for panel movement. It's akin to stating you could measure a driver's excursion by eye. Audible differences are a given, but you are already perceiving a change so you brain has already signaled there will be a change whether there is or not. Is it really that horrible of a product if he bought the shit to make his roof stop rattling and it worked, ive heard his truck at full tilt and it is pretty damn quiet for the huge sub stage. He bought it to stop rattles, applied it properly and it has served his purpose, no need to split hairs and try to discredit what he experienced. This is such a dead horse, why spend this much time worrying about it?

Ive got the same DMM, and nice subs

But just cutting a whole is just a sealed box with a large leak, a hole and a port are not the same

Theres much more to it than just cutting a whole, you'd have to add an external port to retain the box volume,

Nice truck, what song at 3:15ish?

Glad its coming together man! Good luck at the show.

Id check your coils, and make sure the carb is clean.

If you can get it for a good price Id go for it. Theres also the diehard platinum series, and oreilleys makes an agm to.

Need more port.

Guns?

Ive got a Bl 12 FS....

You can DL them from youtube in MP3 format using an online converter flvto.com

So ive got several rolls of this, and im considering selling it on the forums, but I figured Id try and post here to see if its something people would be interested in buying. Ive already used it in several places in my car, and I use it daily at work, its a quality product. http://www.kasonind.com/index.php/products/fabrication_supplies/7513_tacky_tape/ http://www.schneemorehead.com/pdf-sm/SM5227TDS.pdf

Bump

Bump

No ones interested in this stuff?

Im not sure about pricing yet, im thinking around $35 for a 50' roll

Good to see some great CS

Voted as well I say dd

If your smart with the volume and only demo with the engine on you should be able to have safe voltage with that electrical.

Thats one hell of a mess to clean up. I woulda have thought you being a regular on his forum and someone spending a decent amount of money, he would have tried to handle it differently.

Nice site.

Lookin beastmode man. What kinda 15s?