vladd

booooya just finished the pucking fag lab and i got 100% on it, labs can lick my taint

started playing the sub today, stunk like hell so i stopped...i'm guessing its fudgeed

i'm not sure who i should be mad at over the speaker...fedex...the guy i bought it from...the speaker itself, cause i need somewhere to place my anger

fell aslepe while trying to do the last lab due in math..screw it, i'll do it tomorrow, frosty, have you done it?

at work today we had a girl with the biggest boobs i think i've ever seen, even the girls working there were... she wasn't hot, but i didn't see anything above or below the huge boobs....good day today

i like working on rear ends.....prefer 80's imports

just got it today....noticed before i hooked it up, hooked it up to make sure it worked. Hell its fedex, if i say the freq response is obviously screwed you think they'll know any better?

btw this was sent with signature required but nobody signed for it that i know of. Go Figure...it was just sitting on my porch

i'm thinking it was 1/2 of chad^2....and it was a mag (as in tirefryr's avatar) fedex dropped it, magnet chipped and everything, so should i file it with fedex? how do i do that?

but it sounds fine? how is that possible? maybe my ears just suck

oops..just noticed you aren't one of the people from last weekend....so do you mean nick from wv? his name was mustang something.... or do you mean someone else? i actually thought about hte rubber hammer thing, but i'm used to working on cars, i don't know enough about speakers to fix it myself

nick? from last weekend? it would be great to get this actually taken care of

well it sounds fine....so i'm going to let dave and jim listen to it this weekend, if they're around that is. If they hear that something is wrong i don't know where i'll go from there, the guy i bought it from is being quite cooperative, doens't appear to have been dropped...i'm thinking manu defect

well thank you, i have ugly feet and tired of people always seeing them

http://i2.photobucket.com/albums/y50/vladd...-17-05_1657.jpg http://i2.photobucket.com/albums/y50/vladd06/thinmag.jpg http://i2.photobucket.com/albums/y50/vladd06/thickmag.jpg you figure out whats wrong...D@MN IT

thank god, this guy didn't have what he thought he did, i was going to hate the cadence, lol

DAMN just found the orion amp i want for $100....should i really keep the cadence now? crap crap crap

seriously considering this, but afraid i might wanna sell it later, some punk will pay extra for the bling

i know, WAY too much bling, but the price was right and the specs were too, 250w x 2 @ 4ohm is the best i can find its the cadence z1200c, i've found specs both above and below that, if you all can get me any better reliable specs, please do 'll be using it until i give it to the GF to go with a sub (don't know which i'm going to give her yet)

http://i2.photobucket.com/albums/y50/vladd...-16-05_2204.jpg http://i2.photobucket.com/albums/y50/vladd...-16-05_1843.jpg my new amp, lets hope it works so i don't have to drive to georgia or whereever and kick the guy's butt

i entertain myself as often as possible...

sounds good to me, so everything else looks in line?

so yea before i start buying and end up with tons of stuff that i can't use, i want your all's opinions. The setup i'm going to have is... avalanche sub (dvc both coils ran to terminals on box) orion 1200d amp running @ 1 ohm, but want capable of running at 1/2 (in case i get another ava) so i'm guessing 1/0 power wire instead of my 4ga Pioneer 35w X 2 @4ohm (has scoshe kit running to it now, looks like 10g power wire)...going to run it to my tweets eventually cadence z1200c (best info i can find says 250W X 2 @ 4ohm) going to run comps off this eventually) soo, here's my ideas so far, i'm wanting to go with knukonceptz unless someone knows a better brand that is less expensive, i'm broke. I want to get terminals from knukonceptz, so i can run the wire all the way to the battery, unlike the place i have it now...dave knows what i mean here. I'm thinking ~20ft of 0/1 gauge power wire to a distro block and run 4ga to each amp (cause that distro block is much easier to find...i'll find a way to make it work for the pioneer) 4ga ground for all the amps too (cept pioneer obviously). I'm thinking the bi-speaker wire from knu, cause it should save me a little money (running it for the comps. so i only have to make one run). but will 12g be plenty for the comps running over 100W to each? preferrably the possibility of 250W without problems. 8ga speaker wire for the 1200d, unless thats overkill, which isn't bad if it's a little overkill, but if its a lot, i'll go higher. inline fuse holder with like...250amp fuse? i think thats it, right now i have the 4ga wire that i ran for the 1200d before. everything else i'll have to buy. if you all haven't noticed i have to think about something a LOT before jumping in, everything has to make sense and preferrably be quantified. so sorry if this post is completely useless

i could just wrap the bare wire around the the termial and screw it down...:-D but for real, how hard was it to fit? was it bigger than most 1/0? i wouldn't care to trim it a little but don't wanna start hacking away EDIT: add a batcap to that list of things, dave suggested one but i have no idea what they are or where to get one with the exception of the description he gave me (i know what it does, but wouldn't know how to hook it up unless its as simple as + to + and - to -)

i want drinking boots, they sound fun