vladd

damn, the aurum cantus 7's are on sale and in stock at PE and i'm 90% sure they won't fit in my doors, damn damn damn

tempted to buy a pair of the tang band 6.5" subs to play with, but don't know what i would do with thtem after i decided i didn't like them.

http://img29.imageshack.us/my.php?image=25...hz30sqin6ts.png that one is interesting

eh might as well completely redesign it

looking like a 14.5 x 32 x 14.5 with the 2.5 x 13.5 port....but my measurements suck damn it...came out to 29hz i could just extend the port a little more and get it down to 27 or so

labyrinth ports suck

throwing together plans for a little over 2 cubes and sub 28hz tuning, we'll see how it turns out

i don't mean trunk, i mean space between the trunk and the temp mounted revo

should fit, won't leave me a whole lot of trunk though.

sounds good to me now i gotta draw up some specs, up to 32" wide, 14" tall 2cubes at 28hz but how wide of a slot port? height will be set at 12.5 so i'm thinking 2-3" Can you go 14.5" tall ? I have plans for 2 cubes 29hz 32.5 square inch port . This was the monster low end, high power box for the hx2's . probably, how deep is it?

A hole is MUCH better than a peak. Either way I'd try and roll down the freq's next to it even if it means higher levels on the gains to compensate. Boosting with an eq has never given me results that I am very happy with (other than minor boost of course) that's the plan, i'm really hoping that it's between the crossover points or something. I need to d/l a bunch of warble tones but no idea where to get them or what program to use to generate them. I'll bring my laptop Sunday . I can burn you a test cd I have. I'll see what I can do about printing out the guide for it even better, i really gotta come up with some deadening solutions for the door too but for that i'm 90% sure i'm going to need some sheet metal

sounds good to me now i gotta draw up some specs, up to 32" wide, 14" tall 2cubes at 28hz but how wide of a slot port? height will be set at 12.5 so i'm thinking 2-3"

If you had an H701 and 2 belle's you should be in the 3 way world. Bridged belle for midbass and the other 4 chn for midrange and tweet. Then you need to up the 7" driver a notch, even though I LOVE the Nextels. 3 way front stage would happen but it'd probably in the manner of making a sub fit somewhere up front instead of an 8" midbass.

A hole is MUCH better than a peak. Either way I'd try and roll down the freq's next to it even if it means higher levels on the gains to compensate. Boosting with an eq has never given me results that I am very happy with (other than minor boost of course) that's the plan, i'm really hoping that it's between the crossover points or something. I need to d/l a bunch of warble tones but no idea where to get them or what program to use to generate them.

i'm going to try to sleep again, only going to get 3hrs and i have to work 9hrs tomorrow

pucking insomnia... why are you awake tom?

what i wish i was running... h701 combo seems to be what i'm lusting after ATM mdt-33s in the dash 7" nextels (damn you tom) 12" Q x2 in custom trunk molds 2x memphis belle (1100W/sub and bridged a/b channels for mids and tweet)

8053 big belle (temporary revo for sub till i get the belle repaired) morel mdt-29s in the dash poly mids in the doors 12" Q sealed 1.75 cubes in the trunk

B stock are ones that have imperfections in them when sundown receives them, same amp, just a little cheaper and maybe not as purty

i discovered a few things to work on with the stratus tonight (with the test disk). my sub/mid integration needs a LOT of work, i don't know the exact freq cause i still can't find the details on the test disk i have, but one of the warble tones has a huge hole in it, i'm guessing its around 40hz but that's a total guess. It's loud both before and after but drops to nearly inaudible there. When i have more time that's hopefully easily fixable. My door panels have two resonances, one in the 200-300hz range and another up near 1khz or higher. I knew about the lower but not the higher. I'm hoping solving that will help tame some of my reflection problems as well since they seem to be right around 1khz. oh yea, center image sucks, i need to actually setup the time alignment

no worries adrian, 4cyl FWD here

i wish i was

i need to upload the pics of the 1911, the extended slide release was stainless but bead blasted so i took some 1000grit sandpaper to it, i think it ended up being shinier than the rest of the gun, but looks nice. I've also been trying to talk a certain female into buying me these grips for it...

i see j00 ppl not posting

in my opinion, save up your money and get a nicer driver. For that kind of money i can't think of a setup that won't leave you wanting more.