Frostedflakejake

Use this to Set gain If it doesn't already state in that thread, stay away from bass boost.

I know it's on the highend of your budget. Many people run them down to .5 ohm with little to know problems. I assume you have the appropriate electrical system to do so? Amplifier!!!!!

What? Does a 1/4 of the way up on his amp match 4v?

No it won't. If anyone told you that they are wrong. Horribly, horribly wrong.

Went through our libraries website and I couldn't find an AES subscription.

Not going to pay for AES Stephan, but feel free to see if i have access to it. Jacob Bell Michigan Technological University I am a local chapter member of AES however

Some people never cease to amaze me on this board. How do people claim to know how to build and design a custom box, but don't understand that you don't have to give RMS power to a driver? Getting so tired of the "x vs z" Fi speaker questions.

+1 for a slow hop. Tired of this bipolar weather. 40 degrees and then 10 degrees and then 40 degrees and then ten degrees. I never know what to wear until it's too late!

Hmmm... that's good to know. Thanks a lot for your help! There aren't that many settings really and I believe I tried every combination so I would agree that it isn't functioning 100%. That's okay though! I only paid $7 for it and I was running it on stereo for an hour or two and actually enjoy it quite a bit. I'll mess with it more tomorrow. It's late here!

I just picked up a Yamaha R-V503 for $6.99! I'm the processing of going through the thing to make sure everything works and was wondering if anyone had a 5.1 track I could download? I'm not really a movie fan so I don't own a single movie; nor have I ever illegally downloaded one. Doesn't need to be anything spectacular. I would just like to make sure "Dolby logic pro surround decoder" works. Thanks in advance! Oh! And I realize it's kind of a waste of time to make sure the 5.1 works if I don't watch movies and thus don't listen to anything recorded in 5.1, but I'm considering reselling this unit if I could get north of $50 for it.

I've tested it on all settings with non 5.1 material and got nothing. Don't know if that means anything - but yes, I know how to change the settings If it helps, I'm trying to connect exactly like this diagram, except for only 1 set of speakers on MAIN rather than 2. While doing this, and having it on the Dolby settings the center channel(s) do not work at all and the rear channels sound very poor. As if there is obviously something wrong.

Perhaps you could help. I don't really know anything about 5.1; I've never used it before. I've connected all the speakers as it lists in the manual, but the center channel speaker will never work. I was hoping it was something related to 5.1 and that the center outputs weren't just blown. Regardless, I wouldn't know how to execute either...

I also would say it would probably not be the best way to undercoat a vehicle. But i suppose if you're really low on cash, it couldn't hurt to try it (probably).

Interesting stuff.... might try it out on something that isn't so important... Cool find man

Welding Wire is the best deal for 0 gauge. Good quality stuff too. However, that being said, I do run KnuKonceptz and it works well for me. But if I went back in time, i would choose welding wire instead.

Don't understand how shizzz giving you advice was negative... I'm rather impressed by your score as well! Julian was saying that the only place you're likely to find 0 gauge wiring that cheap is if you buy it used. Don't remember if anyone answered your questioning on deadening, but it goes both ways. Some people get higher scores, but some people also loose numbers from deadening. On any respect, good luck

But it's melting like hell now! So tired of this bipolar weather! We had windchills of negative 28 degrees last week and now it's almost forty today!

We have about 2 feet on the ground right now! Loving it!

I feel you. I still remember transitioning from my Mustang to the Explorer. Took weeks to remember that there was only two pedals at my feet.

I'm confused. Are you selling these? Is the price for the pair?

Crazy Bitch

Cactus. Not something I would ever imagine being an obstacle while riding! My worst expereince is seeing a logging semi right at the vertex of a hard curve. I will always remember that moment. I thought for sure i was going to die. Instead, gunned it straight into the trees. Figured I would rather take my chances with the trees rather than trying to weave around an 80 tonne vehicle. But cactus... that sounds just awful.

I know its not the same, but i've been in a lab on campus since 8 this morning. I feel your pain

Awesome Mac!