hdrox88

OOPS! I wasn't going off of the programs recommended enclosure if that is what you are talking about. Or is that program bad alltogether?

Yeah, I was just playing in WinISD and 9ft^3 tuned to 30hz would get you the lows you want. You would probably need to be careful not to bottom them out with a box that large and tuned that low. I can design a box for ya once you figure out what you want to do.

If you let us know what you did and didn't like about that box we can probably be much more effective in helping you out. What kind of power were/are they getting? Where was your crossover set?

Here ya go. A comparison of the two. Click

Well, if pure SPL is your goal then a t-line might not be for you. Do you just want it loud or do you want to compete?

When you say TL you mean a t-line enclosure? Also, what year model L7?

May I ask why you want to strap those two amps together?

Haha. Thanks for the chuckle.

Sweet thanks.

Where can I get one of those switches?

Not trying to be a mod or anything, but, did you read the rules?

See the little envelope under everyone's avatar? That is it. na man dont see one?! It wont be under your own. It is right next to the add friend button. lol no theres not one under anybodys for me at least... Hmm. thats weird. Just click on the screen name then. you should find a send message or PM feature in there.

See the little envelope under everyone's avatar? That is it. na man dont see one?! It wont be under your own. It is right next to the add friend button.

Was there an audible pop from the amp itself? If you are not worried about any warranty you could open her up and see if anything looks out of the norm.

See the little envelope under everyone's avatar? That is it.

Thanks man both you and hydrox88 rock man! thanks for the help You are welcome

Yeah me too, I have been trying to design the best box for 2-12" in the future. What program did you use, just curious? I use a Box Calculator that I downloaded from a member on this forum, cant remember his name though. I did the same thing. From a user...ExpoSport...on ***. Everyone says it is really accurate. Haha. It wont let me mention that forum...thats weird. Something bad must have happened.

I'm not familiar with amp internals but you have the batts wired in parallel right? All + together and all - together?

Oh, no problem. It's all good. I like to play with this kinda thing anyway.

Here is what the box will look like. It is very similar to the specs that jay-cee has listed above. I doubt you could hear a difference in the two boxes they are so similar. Let me know if you want the specs and cut sizes of the box I have here.

ok so my width can be no longer than 52in...... my higth and depth both have to be 14"...so itd be ??Wx14Hx14D, and would like it to be 32 hz preferbly straight vented not flared... sorry if i made it hard to follow that but let me know what you come up with and thanks in advance! Ok, Do you want the port and sub firing the same way? Is there anywhere the port or sub cant be due to being blocked by something?

You cannot seal a BTL. Sorry for the mix up. I noticed that after I posted that I accidentally put that in there. Figured it didn't make much difference cause if the OP already had seen the specs on the website then it was already known that sealed is not recommended.

That is a really low tuning freq. Also, linky is not right.

Honestly nobody can answer that question can this get louder than this setup (or give you the best and accurate answer because their are to many variables). Sometimes you just gotta find what you want and if its not loud enough for you add on or upgrade what you have (thats what car audio is about upgrading till you have what you want). I would go with the horns and a nice mid-range and if thats not enough for you then step up to a three-way setup or buy you some speakers with a high sensitivity, take a lot of power and good amp. There is a dude on here that has 4-15 xcons and look at his buil I think he has a three way in his doors, ask him he will be able to guide you in what will be loud enough or close to for your setup. Do you know who? BTW. Thumpper is the guy with the XCONs

Let me know your max dimensions and I can design one for ya. I want some more practice in sketchup anyway. If you want to build it yourself that is.