DeezyDee

Good Sunday everybody, its been awhile since I was last on here. Ive decided I wanted to get back into car audio, and I seen a deal on eBay hard to pass up. As Pioneer is loading out their "NEX" generation headunits it appears the older models are going for a good price. So I picked up a AVH-X5600BHS for my 2010 Dodge Challenger RT (with Boston Acoustic factory installed). I'm not very car audio inclined, so apologizes in advance if I sound off when describing my problem, or whats going on. Friday I got everything in mail from online purchases, all brand new. I got the PAC RP4-CH11 wiring w/ interface, a AVH-X5600BHS Pioneer Double Din, Aftermarket Harness + Antenna. I decided to install that evening, so I went out and connected all the colors together, and plugged the radio in. I go no sound, but it powered on. I read through the manual, and adjusted the numeric dial on the PAC interface box to "7" as called out for a Pioneer/Other on the booklet. Reconnected, still no sound. So I called PAC on Saturday to get some tech support, and we went over the wiring connections I currently have. Which was "White to White, White w/ Strip to White w/ Stripe, Gray to Gray, Yellow to Yellow, Red to Red, ect. And he changed things due to the fact I have an factory amp (Boston Acoustics in the J package Challenger). He went from green to white, purple to white, ect. Here is pictures below of his change. Located in directory: dkrtech.com/images http://dkrtech.com/images/photo%204.JPG http://dkrtech.com/images/photo%205.JPG Here is the PAC handbook explaining why he switched the wires: http://www.pac-audio.com/PACProductData/RP4-CH11/1_Instructions/rp4-ch11_instructions_050913.pdf And still with him on the phone, and switching wires... Including blue w/ white stripe from the RP4 box to the radio, and dil on "7" I still get no audio from my speakers. And I have checked the fader, and it is set to "O" center. And I even moved it to forward, still nothing. Does anybody have an idea what is going on? Any help is appreciated, thank you. Pioneer AVH-X5600BHS manual is located here for reference: http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/AVH-X5600BHS_OwnersManual092513.pdf I tried, and I really don't want to fork out 90 dollars for an install... Because I take it out, plug in the factory radio, and my speakers work. Thanks for any help, Dustin

Well I don't know exactly what you mean by that because the PAC RP4-CH11 is a $100 wiring harness lol. I can put the factory radio back, and it plays audio through all the speakers/sub. The pioneer is somehow not sending signals correctly. It has to be wired wrong. But I don't know what to check. Ive tried matching color to color, and green to white, purple to gray ect like the pac tech guy said, still nothing.

Basically in that picture. I have Green to White Green w/ Stripe to White w/ Stripe Purple to Gray Purple w/ Stripe to Gray w/ Stripe

Howdy everyone, I am looking to seal off the trunk of myv 06 impala. The box was facing towarda the rear (port/sub) facing towards the trunk hatch. But now were trying to flip it facing in. ATM I'm running 1 15inch fI bl by a 1000d sundown. I want to thrown another 1000 and strap it but from research I might have option other then Ronaldo get a btl. But for the moment, for now, I want to flip the box around. I could use some tips. Or a link robs tutoral, thanks

Hello, today was one of the worst days ever, and what happened I thought never would, but it. So I'm here today to ask for advice. I was mounting the sub (15 fI Bl) and my hand slipped and ripped the outer foam ring around the sub. It's closer outside towards the steel ring where the holes are, and you can't see it unless you fold the ring. I managed to stop and retract and not run the whole screw drover through, but it did rip. Upon inspecting it closely I lost no material, it's just a 1/8 inch long tear. My question is this fixable? In been reading like crazy and can only see two common solutions. Silicone or superglue. I am leaning more towards the silcone because it won't get stiff hard like superglue. Any tips, ideas, or suggestions? I appreciate all input. Please help of you can, thanks

electrical isnt bad, but im not trying to do anything stupid here... Guess I might recone the BL to a BTL, and get a 2000 and sell the 1000... I just want a little more thump...

Yes the fi bl is fully loaded, made for daily tho. I know it's got all the options. I have a saz 1000d. Can I buy another 1000 and strap it or just get a 2000?

Update, I think gods in my side. There is no hole, you can't see through the foam but it's got a slash. So today in going to go put something between the two flaps. Leaning more towards goop. But yea no hole, so were back in business. But a question, can one fi bl 15 handle two 1000d sundown, or one 2000d sundown. I was debating on reconing it to a btl, but I just want a little more... Thump

I have the box facing towards the car (cabin) and trying to seal off the trunk... I have been researching what to do... It seems to come up use 3/4 inch plywood and expanding foam... I just bought 50 ft of Sound Deadening, so I will use that all over the wood to stop air flow... Sound about right?

To get a btl instead* Is what I ment

Man this thing is going to be beast, lol.

First off I'd like to say hello, first time posting outside Fi / Argent Audio forums... So don't mind my retarded question, for I am new... Question would have to be, is there a aftermarket mount or something I can install to keep the rear view mirror on my windshield solid and firm, and if not, at least to stop it from doing the goonie's truffle shuffle. If I cant keep it solid, maybe something to absorb most of the movement. Running SAZ1000D & 15' Fi BT, has as good knock to it... Thanks, Dustin

Good morning andrew, its tuesday morning i got to work and checked my ups tracking, and it still says in transit last scan in CA. the delivery day from last friday the 23rd was moved to monday. ill see what happens today and see if arrives, but i tried to get a investigation started but they said the shipper has to get that started. investigation is to see where its at, why is hasnt been scanned, ect. i know the package was sent because the box invoice tracking details said 95lbs. somehow, something happened... the lady at ups said "this rarely happens" so i dont know, but she did make it aware there is a problem is says the last scan was in CA. ive checked everyday for a week and it never changed. also tried calling you but your phone number does work. i hope to god it comes, i got all happy and excited when i saw the box, i cross my fingers is shows up today, but the tracking still says CA. so if you could call and see whats wrong, id apperiate it. thanks andrew, dustin

I just got a 100.4D amp from DB-R, and I am having issues as well...

well... no package today, according to ups tommorow is the last day they will keep "investigating" before they give us back a refund... This is retarded, you build a badass box, it was shipped, i got the tracking, then ups just lost a package and have no idea what happened or where it went... I'll never be using ups again.

yea im aware of ups, i typed "ups lost my package" in google to see how i can resolve it but all i got was stories lol i hope it comes today, please god lol

Deezy Dee's Chevy Impala Build Log Inspired and made come true by Hove's suggestions 06 Chevy Impala LT (Slight Modifications, Rims coming soon) One Fi BL 15" Sub woofer (Daily, Coil, ect) 1000W Sundown Audio AMP Shuriken High Performance Battery (80Hrs) 31 Feet of O/1 Gage Wire, RCA's, all accessories ect Stinger Volt Meter Pioneer 6100BT In-Dash Box Built by Argent Audio (Andrew) Double Baffle, Flush Mount, tuned to 33hz - - - - - - - - - - - - - - - - - - - - - - - - - - More pictures after the Install is finished, and my face to hear my new system (first system) Stay Tuned

Hey bigrank, ill buy that off you... can u pm me ur # so we can talk

Hey bigrank, send me ur number via pm ill buy em

Just sent it to you. Andrew Just paid, thanks again Andrew! I will keep you in mind next time i need a box or over hear someone asking where to get one...

Forgot to also add a active setup, which will come at a later date!

Great work Andrew, 10/10 Just waiting for a invoice to finalize and put that bad boy to use

Great Job Andrew, I am very happy with this so far... I'm sure with this kind of craftsmanship and quality customer service, you will be getting more business by word of mouth, I already told a few people about your work and how to contact you via your forums here on SSA. I was having a crappy day at work till I saw these pictures, now its game time... lol Keep up the excellent work

very nice, excellent work so far

oh man i think i typed the e-mail in wrong, i apologize for any inconvenience... sorry its [email protected] I believe I left out the y, sorry andrew. If you can resend, that will be great. Thanks, Dustin