Shogen

oopps... yea you're right, if I keep it at SSA optimal it is 42 inches...

15" Xcon .... Was thinking about going sealed but then the idea of aero ports was brought up and I saw Stef's and loved the look and thought ... "Hey, a sealed enclosure is just a big box.. and a ported with aeros is just some tubing thrown inside of it and cut to the right length for tuning... I can do that.." Should I just do this? I was looking at PrecisionSoundProducts and said I could do this... Not much more work that building a sealed enclosure... Right??? So I looked up on their site for ports calculations and realized after understanding it a bit better that the Torres calculator does it as well... Here is what I come up with and it seem correct... Let me know what's up fellas... Seem off by a bit.... Which is correct??? Or any one of those is close enough??? This is from Torres' Calculator: This is from PrecisionSoundProducts:

went with a slot port since you made my aero port so difficult... lol Okay.... Well... If I do it to my max height and width then my depth would have to be around 23 inches... which would make the box 5.97 cubes gross but after port and subwoofer net is 3.96 cubes? Is that correct??? With 12volt, I went for 28hz tuning at 3.75inches wide and 15inches high... length would be 38.8inches 27inches (according to 12volt)... Torres says it is 56.25inches of port area... WTF am I doing? ? ? lolz

lol... you trying to get me to use 12volt huh??? Here's the thing, their calculators are all separate... How does it work out right? I felt lost on their calculator...

^^this.... lmfao... :roflmao:

In what language Mark?

If you go visit bassahaulic he can put you to sleep for a long time... In his bed of course....

I'm only unsure of the " # of Common Port Walls " ... someone? anyone?

So here is the deal fellas.... I don't have the best room to work with and I'd like to maybe get this done sooner rather later Would I be okay with this:

That's too long.. What is in there right now???

No you ain't!! And hurry it up!

FINE! be like that.... !!

How much did you pay if you don't mind me asking????

The actual wait is the month or so depending on the steel... Sucks but worth the wait... Those subwoofers get crazy reviews...

Forgot to say.. I hate Dipset... So that would be why I didn't know who he was... Love Das-efx... Bone Thugs was my shit back in the day... lol

To answer your original question, the only difference is the output, 20 amps on top, ~10 or so on bottom. You made the right choice and got the best bang for the buck, use the other $80 on teh audios or have some fun with it. That said, because I know we have 270's in stock (250's are usually built to order) and that's what you'll get shipped, and it will get shipped tomorrow (Friday).. Thanks again for the order and I look forward to a (hopefully) positive review.. Rob Just fcking awesome right there... Now I just wish I could afford that alternator for my Camry and since they discontinued the HP line for my car I'm stuck in the XP category which is good and badd... Let us know how it works out OP...

NICE!! Def should take some photos of it installed and what not....

amazing man... love it... can't wait to get my Xcon in a damn box already...

Plugging in the dimensions from the SSA design into the Torres Calculator shows 3.90 cubes and a tuning of 32.68hz ...unless I did something wrong... Who is correct?

oh and they're box IS too big.. It won't fit... Max dim for me is 16.5H x 33W ... depth not an issue TBH... So you CAN just do a L-port with 90 degree turns? Thought that hindered some sound or added port noise or something to that affect ...

nah... if you look at all those designs simple at first glance but then... How do you get all the bends done? You can't just do 90 degrees turns... 45s are used and then to join them smoothly you need to angle the cuts... That I CANNOT do and without equipment for it, I WILL NOT try to...

So I may understand better... The optimal port area needed should be around what number? 30- 40 or 40-50 or something like 80in??? Even if I don't do this myself I'd like to know.. There is now a thirst for this knowledge..

I guess it's more because I can probably build an enclosure with aeros easier compared to a slot port to be honest.. I have no way to make the cuts that it would require.. But with aeros, I'm just making a sealed box with a hole or holes in it and a tube that goes through it.. basically... Does that make sense??

I don't get it Stef??? IB??? I'm kinda old please explain... lol