Shogen

Nice work man!!!

i believe you can use a DMM and measure the resistance (ohm) ... the right way will give you a proper read out on the screen...

good luck man!!!

thanks for the ideas... I'm gonna try the "ipod test" and see what happens when an input is applied besides the HU ....

i'm sorry.. what now??? thanks for the help jon.. drunk still???

slight update... in the parking lot at work.. disconnected RCAs.. sound gone... plugged RCAs back in to listen to music and sound is back ... was gonna try the set of RCAs I am not using for the rear speaker since they were just there but didn't ...

yea... I'm still undecided on this... got a bowflex recently for DIRT cheap... It's an extreme from like 3yrs ago...

lmfao!!!

500watt would power a pair...

what he said...

ok good... I will probably have someone do this for me as I don't want to mess with the pulley system at all... nor would I take the chance...

hmm... I never removed the RCAs from that amplifier... but the JL audio because of spacing I totally removed and put the RCAs in last... So if that's the case... Then doing the trick stated to the HU would possibly be a solution???

Yup! is caused by plugging in RCA's while there is power to the HU. Try this until you get some $ to either replace the fuse or new HU. Ghetto, but should fix the noise. will do... should I or could I do this on the amplifier side as well??? Just curious..

thanks... forgot about that thread...

thanks jon... I'll try that out... If not then I'll go to the grounds??? Maybe change the one from the distro to the spot on the frame... Might be better... ??

could I have blown the fuse during this installation??? just curious as to how it randomly happened... I will be checking when I get home.. I have a shit ton of RCA adapters... if this is the case though, couldn't I just turn on the HU without the RCAs hooked up at all and see if the sound comes??? No input means no sound? leave the remote turn-on and power/ground in and turn it on??

box looks great.... is that suede???

Thanks ... I'll try the IPOD thing and go from there... I'll def probably hit you up in case it is the HU... Other option is new HU??? lol .. But funds are low since I purchased a DC Power alt and all this wiring and shit... lol

I'll try the ipod thing tonight maybe tomorrow.... It is a Pioneer deck.... How could the fuse have blown? Just random coincidence ??? I didn't change the grounds at all... I basically took the output of the distro block and connected that directly to the battery in the trunk... The ground for the amplifier actually connected to the front speakers has not changed though... So its kinda like this... (at least what I can tell) 2/0 gauge from front battery to distro ... but it looks like 2? power inputs into the distro not sure where the second one is coming from.. Then a 3 4gauge outputs... 2 power and 1 ground ... hooked these up to the battery then 0gauge for power and ground to the JL audio amplifier. Then 0gauge to the power of the BA amplifier which is the only one hooked up to speakers... The ground from the BA amp is on a body frame piece which has been there since I installed that BA amp... Never had whining til I added the back battery..

bien venido mocoso!!! j/k welcome sir!!!

looks like a good start...

wish I had that problem! you don't???

good start blt!!!

Happy Birthday Aaron.

nice!!!