///M5

Rode 350mi once trying to ride about 210. That was a long day and expensive bar tab.

Now I just have to get the thing to accept GPX files so I can rip routes ahead of time. Having confidence you know where you are makes it way easier to book hotels.

FTMFW Ripped the full MN Snowmobile trails into a retired Garmin Nuvi today. Changed the color of the track to bright dark green to contrast the screen. Made them 3x the width of the interstate too. Figure it'll be hard to read in the glare of the snow.

In the pass band region of the crossover when playing a sine wave you will get the output value you started with. At the crossover frequency it will be 3dB down Measuring an octave towards the cross over region will then net you the slope. (Double the f for HP and halve it for LP to find the octave)

Do yourself a favor and measure the passive crossovers you have before installing them. A starting point is a good thing for a first time active setup.

Does your headunit take care of the sub? If not, you'll need 2 miniDSP's. Each with an appropriate plug in. Don't forget the DC Isolator for $11. I am also keen on their volume knob as the bang for the buck says you should order it now even if you don't use it.

indeed, that woman does not need a pizza

Amazingly shitty tools for editing what you can upload into a GPS

Only way caffeine does anything to me is if I drink a FUCKLOAD of it. Then I get jittery. Normally it makes me sleepy. One of the best signs you have ADD. ROFL. I didn't need caffeine to tell you that

No. Okay, well it depends on what you mean by can. You "can" run a Kicker L7 with an Fi Q I suppose, just not a good idea. Anything that creates a difference in t/s parameters is a no no for drivers playing the same frequencies. Even worse if it shares airspace.

....

Only way caffeine does anything to me is if I drink a FUCKLOAD of it. Then I get jittery. Normally it makes me sleepy.

Grab some used Minolta glass and determine what you use the most.

Have a 28-300 as well. It is SUPER awful

If you shoot a non-superzoom and then a super you won't be interested in the super.

Thus my question

Do you mechanically dehydrate them? If so/not I am curious as to what you use. Also wondering if you separate the seed and more importantly how. I was about to buy a tomato separator assuming it would work as I am shy on powder atm. I have used one of the electric tray style dehydrators for the last few years. Always used the oven at low temp, with the door open before that. The Thai's i just leave the seeds in. Others I just slice and scoop the seeds out.My oven has a dehyrdate setting. Thought maybe you had some nice tricks. I am WAY too lazy to extract that many seeds by hand.

I downloaded the 2x4 and Harmony programs. The 2x4 def is superior looking from the features. Curious if there is any unwanted feedback from the unit.What do you mean by unwanted feedback? I am up to four of them now...Distortion.Whats your input voltage?Less than a half volt on one setup, the other almost a full volt.

Have a tray of Thai's sitting on a cookie rack/tray combo. Figured I'd let them get started before firing up the dehydrator.

Do you mechanically dehydrate them? If so/not I am curious as to what you use. Also wondering if you separate the seed and more importantly how. I was about to buy a tomato separator assuming it would work as I am shy on powder atm.

But that has nothing to do with it "levitating" Humidity.Even if not water, it is easy to do.

I downloaded the 2x4 and Harmony programs. The 2x4 def is superior looking from the features. Curious if there is any unwanted feedback from the unit.What do you mean by unwanted feedback? I am up to four of them now...Distortion.All good.

LC's. Since you are from Texas figure Kansas city style might be fun for you.

I downloaded the 2x4 and Harmony programs. The 2x4 def is superior looking from the features. Curious if there is any unwanted feedback from the unit.What do you mean by unwanted feedback? I am up to four of them now...

But that has nothing to do with it "levitating"