///M5

Ha. Boiling water on tap here. Hard to fuck that up.

The metal LPG is great. Don't let material sway you. You've just heard bad metal tweets. *25nfa is the one I've owned. I don't quite understand your choices as none are really similar. Considering your location, off axis is the primary concern I'd have not a secondary. IMO, the 27TDFC is the most over rated forum boner Seas product there is. Sure, budget friendly small format that can dig but it doesn't do anything all that well. If I only had to pick off your list I'd grab the XT19 hands down. It has no balls, but will be easy to integrate with the CA in your doors. Only tweeter on your list I haven't owned is the CAT308 and my T25 was a prev gen, but either way. You also don't need to spend $200 on tweets. Your location doesn't really bode well for perfect imaging so work on getting the off axis frequency response as nice as you can. SInce you are all over the board, have you looked for used ones? Your doors come off in 5 minutes so swapping is easy. May be worth upgrading to something to figure out where you lack and then shopping. A reference point is always helpful.

Ha. If you don't want ice you don't need a rocks glass.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Sloppy ho. Why the hell would you do that in a pint glass. Rocks glass bitch.

They just changed their numbering sequence. Even cars are coupes, odd cars are 4 doors. Seems backwards to me... A 1 series I believe is coming, but it'll be a fwd piece of crap 4 door.

the 2 is the 1, albeit with one door per side

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Thats what I was thinking. But the cheaper ones aroung a grand or so look kinda cheapI would say Panel saw is the best option, the one in our shop isn't exceptionally great but it does a great job. This is the one we use in our shop, We extended the sides out so we could cut even larger panels since we buy extra large sheets of MDF. http://www.northerntool.com/shop/tools/product_200193574_200193574?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Power%20Tools%20%3E%20Woodworking&utm_campaign=Milwaukee&utm_content=M0238&ci_src=17588969&ci_sku=M0238&gclid=CjwKEAiA3Ou1BRDso5XyhduuwFASJABP3PEDs7tDx5oOgGJeTCDcvjFWXNhKjeVfT50Yvu4GmFUOnhoCD1Hw_wcB Is there a way to measure on that one or do you just make a line on the wood and line it up Those things suck unless you have to process a lot of wood in not so accurate format. You need a cabinet saw. He said he wanted to be able to cut down full sheets, a table saw isn't really practical or safe. When building a box I would cut within an 1/8th of an inch and then use the table saw to finish off to the final dimensions. Bullshit. Just need in and out feed tables...or some patience. Stupid to buy a one trick pony, in particular first.

And nannies/chefs/gardners/bitches

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 I'm 30, and my wife turns 32 in a couple of weeks. It's either now or never for us, so we decided on now. This should still make it possible for all 3 kids to be out of the house before I'm 50, and out of post secondary education before I look into retirement. I hate the fact that I've become a long term planner, I don't like feeling like an adult... I'm still young damnit! I'm 41. Mine are 6 & 4 so we are done. If we won the lottery there are such thing as surrogate mothers.

I wish I was smaller.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Thats what I was thinking. But the cheaper ones aroung a grand or so look kinda cheap I would say Panel saw is the best option, the one in our shop isn't exceptionally great but it does a great job. This is the one we use in our shop, We extended the sides out so we could cut even larger panels since we buy extra large sheets of MDF. http://www.northerntool.com/shop/tools/product_200193574_200193574?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Power%20Tools%20%3E%20Woodworking&utm_campaign=Milwaukee&utm_content=M0238&ci_src=17588969&ci_sku=M0238&gclid=CjwKEAiA3Ou1BRDso5XyhduuwFASJABP3PEDs7tDx5oOgGJeTCDcvjFWXNhKjeVfT50Yvu4GmFUOnhoCD1Hw_wcB Is there a way to measure on that one or do you just make a line on the wood and line it up Those things suck unless you have to process a lot of wood in not so accurate format. You need a cabinet saw.

Fuck that. I paid $900 for my Unisaw which would leave a ton of room for in/outfeed tables. That would kill a panel saw for the task at hand. At that budget you are shopping used, but realistically that makes more sense anyways. SawStop, Delta, Powermatic all make killer saws that destroy the $1500 Jet in your price range, but you aren't getting a new one.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Ferrari still uses it too. Gen 3 has been released though by the way. 2 wire with way faster response.

I still do on some level. Last of the great non-direct injected big American v8 sedan. Addition of magneride doesn't suck either. Going to test drive one in the next few weeks and probably then be scared off by the interior.

If the SS sedan here had that front clip and slogan, well then I'd just want one.

Congrats Nigel. Can't believe I am at a point in my life where I feel like I am too old to do that again.

Holy sweet windows, trim, and ceiling height! I really like the method of modernization as well. Fits and is super clean. Pretty sure you'll be fine with the wire in the cup, if not I'd at least ceiling paint it...but I've not seen one that won't work.

Awesome. Or suckage, until it is done, then awesome. I need to do some of that shit myself, but probably should put my dash back in first, lol. Having some issues getting radio reception on my pc in the car. Can control the Directed HD Radio box fine ,but it fades in and out and is laggy.

Are you sick?

my sled is 440lbs and 160hp enough track to not have traction problems too. Its fun!

I'm excited for the 3rd gen trickle down. Speed will help the algorithm a ton.

I have no clue how my hog of a car feels so small and slippery. Sometimes those engineers make magic happen. I also didn't know the ST and RS were so heavy for their segment. My roomates ST feels much more wild than Helga, but it's definitely slow in comparison. I blamed the FF drivetrain, but you think they are just overweight? Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 I have no clue how my hog of a car feels so small and slippery. Sometimes those engineers make magic happen. I also didn't know the ST and RS were so heavy for their segment. My roomates ST feels much more wild than Helga, but it's definitely slow in comparison. I blamed the FF drivetrain, but you think they are just overweight? Even first gen mag ride for BMW was good. Helps a pig fly. Most of it from the confidence a lack of body roll gives.

Like the styling. I know nothing about them though. They drive way smaller than they are. I am not a GM man, but they are surely making serious headway and Ford is not doing anything to keep me looking at their stuff. I'd rather get an SRT Charger than an SHO atm That makes me sad. Chrysler sucks.

Lexus is being a pain in my ass, negotiating on a new RX350 for one of my employees. Bitches won't give me more than $5k off. Not going to get the deal for that.

1-2k isn't something to get excited about either. I get 10-12% off new BMW's without any employee anything.