Jump to content

chris89127

Members
  • Content Count

    41
  • Joined

  • Last visited

Everything posted by chris89127

  1. chris89127

    lighting bolt in side my amp loud snap pop sound

    thats sucks just got this amp new little over a month ago. i still got warranty on it so how do i go about getting it fixed???
  2. chris89127

    18 btl (old 3 mag) tinsel slap

    my buddy has a 18 btl the old style 3 mag. we took it out one day and the tinsel has been slaping on the spider and put holes in them. the box its in is 4.5 cuft and tuned to 32hz with 1800watt on it. i glued some t-shirt on the spiders hoping it will help my main question is does the recone come like the new style with the tinsel under the spiders?
  3. chris89127

    lighting bolt in side my amp loud snap pop sound

    ok i opened it up and found this blown up
  4. chris89127

    lighting bolt in side my amp loud snap pop sound

    i had this installed for a few weeks cheapo sony headunit,1 extra battery,stock alt,sae1200 playing at 2ohm ,1 15btl. just yesterday it started to do that snap sounds like a m80 in the truck and you can see the arc in side the amp. when it snaps its only for a sec then comes back on. all my connections are tight and secure, it only does it mostly when i change the song mp3 cd at high levels and randomly. the protection light bilnks when it plays but does not turn off the amp. i dont know if this would do anything but installed a volt meter from ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemDescV4&s2=0&c=2#ht_1752wt_961 i got the meter ground with the headunit same with the acc power. the signal comes off the main power run the ground for the signal wire is with the headunit ground. but i unhooked the signal from the power it still snaps i don.t think that has somthing to do with it
  5. chris89127

    lighting bolt in side my amp loud snap pop sound

    i have the main power run to the batt up from to the one in back then the batt ground to the chassie then the amp gets power and ground from the batt in the back and when it snaps its only for a sec and it comes right back on
  6. chris89127

    Need new amp

    i got a 15 btl FL dual 1 ohm i need a good amp or amps no more then 350 dollars i have 1 sae 1200 on it now but my buddy is going to buy it so i can get something bigger any ideas???????
  7. chris89127

    One or two 15 BTL's???

    x2 x3
  8. chris89127

    2 amps 1 BTL

    do you think it would be fine for a 15 fully loaded btl to handle 2 sae 1200 on each coil at 1 ohm i did this with a solo x 12 before it hit hard
  9. chris89127

    2 amps 1 BTL

    i realized they cant not be strapped but i can strap them with a maxx link but i don't want to buy one so im going to hook it up amp per voice coil with a 5.7 cu box @ 34 hz
  10. chris89127

    sae 1200 can they be linked

    can the sae 1200 be linked or not??????????????
  11. chris89127

    2 amps 1 BTL

    ididn't think you could hook them up together as it does not say anything in the manual but i see now. i will hook them up both ways when i get the other sae 1200 for now 600 rms @2ohm
  12. chris89127

    2 amps 1 BTL

    yes 1 amp per coil soo 2 amps one btl i ended up getting a 15 btl of ebay but i got that dam amp (sae1200)allrdy and that 15 is a dual 1 ohm but i dont want to sellll that sundown its a great amp so thats why i was thinking off that set up has any one else ever hook a sub up like that it was in the solo x manual where i found how to do it
  13. chris89127

    box size and tunning Fi 15" Q

    i knew it didnt seem right thanks for the help
  14. chris89127

    box size and tunning Fi 15" Q

    im going to be getting a 15 Q soon going to be powered by a sundown 1200rms at 1 ohm and i need a box could someone suggest some box sizes and tunning i want it to be loud hit them lows hard
  15. chris89127

    box size and tunning Fi 15" Q

    looked some stuff on tunning and i came up with this box im not sure if its right i used online calculators here it is out side dia. 16.5 h 31 w 21 d the port is 15 h 2.5 w 16d 4.1 cu.ft with out the port and driver it should be around 33 that what im looking to get
  16. chris89127

    box size and tunning Fi 15" Q

    Welcome to the forum, first give us some more information to help us help you. What car will it go in, what space do you have available, what other equipment will be used and do you have any upgrades to your electrical. I would stick to what FI recommends for their sub and no matter which size you pick within their specs should do you justice. its going in a 1990 olds i got mad room box size is not a prob. going to be installing the big 3 + extra batt. when i have the money HO alt. im going to be running all 0 for power and ground i dont know to much about tunning if 34hz is better then 28hz i dont know lol
×