~Abstract~

OK...didn't take the dustcap off...I figured I'd royally fubar the sub if I tried that. I just pulled on the noisy lead and shot some instant set epoxy around the lead on the cone. Held it tight for 5 mins and hooked it back up. Sounds good...I think I can hear a rattle on loud low notes...but unless it gets worse, I can live with it. We'll see how long it lasts... I'll be sending the sub off for a recone before too long...I need to research my options for spiders and leads...this is just a temp fix. And for $3...I couldn't be happier. Thanks for the help everyone!

I'm heading to the store for some epoxy here in bit. I'll pull the dustcap and see what's up. So there's a nut and bolt in there? Whatever's rattling around sure sound's heavy... Thanks for the input!

Cool. Thanks!

Sorry...the lead came loose and I need a recone?

OK...so I pulled it again and played it freeair. still getting a funky rattle. I discovered if I pull on one of the leads while the subs playing, the noise stops. What does this mean? How should I fix it? Should I pull on the lead and epoxy it in place? I've got pics of the spider and felt if those would help.

How much would you (Fi) charge for a foot of BTL tinsel? Thanks.

Do you mean something is clipping when I hear scratching currently...or that something WAS clipping leading to the single shortest lead failing?

That's probably the direction I'm headed... I'll solder a short length to the landing and crimp the lead to that. When that gives up the ghost...I'll pony the cash to ship the bad boy back to Vegas. I didn't save my box...what do you think is the best way to ship a 70lb woofer? Crate and freight?

Everything's maxed. bassboost is set to 0...gain is set to unity with the saz100.4 running my CDT's active. I've had the system for awhile (3 years)...and I don't run it super loud... I noticed wear on the spider and felt pads...from both sets of leads... RED: and u actually want help? Gain is propably not set correctly or the HU is clipping. Setting gains by ear is a really hard thing to do, and thinking that setting the gains (about) the same on 2 different amps means it is set correct? Even if u had 2 same amps it would be that one amp is clipping and the other one isn't. (learn more about clipping instead of calling people noob when they are trying to help.) If you read the OP, you'd know that I wasn't asking for advice or condemnation on using bassboost or setting my gains. I asked for repair options for my tinsel lead that broke...because it seems to me that it's too short. I would like your help...but you assuming I don't know what I'm doing and then asking me a stupid question about what I'm running bass boost at isn't productive. Ok then...I'll bite...How would my bass boost settings affect your advice for repair?

Box is solid. Braced and caulked. Checked all bracing.....still want a Kaotik box... I've listened to the cone at volume...the sound is definitely coming from the sub.

The felt is pretty fluffed up...and there are holes thru the spider. I can hear the leads bouncing sometimes.

Definitely! I appreciate the input! How can I set my subsonic filter properly? I've always set levels by ear. Never had a blown sub before...been in the car audio scene for almost 20 years...Just read the tutorial on using my multimeter to set gain...I'll try that. If I run my head higher I get clipping from the HU (when volumes up)...if I run it lower it feels like I have to have the gain too high to get decent volume. Should I add the other SAZ1500d that's been sitting in my closet?

Maybe...don't think so though. 140amp Ohiogen alt to 2 2150cca batteries to an SAZ1500 (I have an extra, should I use it?)...to a loaded 15" BTL in a 4cube box tuned to 32hz. In the back of my wagon. Could be clipping...but I try to pay attention to what I play and I don't let it clip...clipping destroys speakers, you know. It started going intermittent (couldn't see anything wrong)...then one day it quit. That's when I saw the tinsel pulled from the landing. I'm thinking the leads are too short...they were barely long enough for me to resolder. The subsonic filter doesn't have any sort of markings...it's a standard pot...I set it as high as I can without it affecting sound quality (killing the low end). What kind of answer are you looking for here? :confused: What's the proper way to set a subsonic filter? I know the one set on my mids is 120hz...

Maybe...don't think so though. 140amp Ohiogen alt to 2 2150cca batteries to an SAZ1500 (I have an extra, should I use it?)...to a loaded 15" BTL in a 4cube box tuned to 32hz. In the back of my wagon. Could be clipping...but I try to pay attention to what I play and I don't let it clip...clipping destroys speakers, you know. It started going intermittent (couldn't see anything wrong)...then one day it quit. That's when I saw the tinsel pulled from the landing. I'm thinking the leads are too short...they were barely long enough for me to resolder.