thebiggmann12

op, are you talking about box tuning or the actual frequency?

irragi makes a great alternator...lots of people have them and love them. i plan on getting one sometime eventually.

GET A FOCUS!!!! lol.

illinois is a no fireworks state, but i live about 20 minutes away from a shelton fireworks, which just happens to be like 5 miles into indiana lol.

the fi car audio site tells u what the minimum requirements are. why don't u post up the room u want to use and see if somebody will check and see if its enough room.

if i recall correctly, the v2 will cost a bit more than the v1s but will also be quite a bit better. and u might try finding a couple 15s used or find a few motors and recone them so they are brand new.

their biggest sub looks like a nightshade with a different sticker on the front.

this was on my local news too, and according to the news the 2 girls had been fighting with the cop and he could not restrain both and he basically got fed up with it and threw a punch...in all honesty, i woulda done the same thing.

x2 on the more power, while is doesn't take a certain amount of power to make a subwoofer work, if u want it to get louder, throw some more clean power at it.

he said bl's.

mikemihai, where you located at in illinois?

what do you mean subs offset?

here is subs up port back. gives u 3 inches from the hatch/trunk, its only about 5 cubes per sub, but with the power your going to be running i dont think it will b a problem. lots of port area which is a good thing.

let me whip one up with subs up and port back.

here take a look at this. still subs and port up. but fixed a few things. comes out to just a hair over 6 cubes per sub. slap some bracing in it (which you will need) and it will be right around 6 cubes even.

o good call, u could go one sub in the top right corner and then the other sub in the bottom left corner. that would probably save u a few inches, or i can re design and figure something out to have the port facing the rear.

o u want the port along the bottom of the box firing to the rear?

well going subs up and port back you would have to have some space in between the port and the trunk/hatch u will be losing alot of space and would probably be pretty close to the bare minimum by making the back smaller. it would have to have a depth of somewhere around 27-30" instead of the 33". personally i would just do subs and port up.

pwk designs boxes...he doesn't build them. it doesnt take much for somebody to completely fuck a box.

try tapping on the faceplate or punching ur dash right above the indash...not kidding, i have to do it with my pioneer 6900ub. worst comes to worst it doesnt work, then take the indash out, and take the casing off and blow it out with an air gun. see if that helps.

must be nice to have places to ride...i had to sell my quad bc i my mom said the rings around the yard looked trashy.