bigrank916

If by efficient, do you mean output? A sealed box is going to deliver the best sound quality. They recommend as low as .6 cuft. How small are you planning to make the enclosure? The amp will power the drivers just fine. As long as the two drivers wire down to one ohm combined to get the most out of that amp.

damn slow internet

Another stock alt is not going to do it with a 3500D. They are talking about specialized alternators for car audio if you didnt know. You will NEED one of those. Wait on the batt until you get the h/o alt and big 3 finished in 1/0 wire. Another batt is not essential right now. Yes you can ground to the chassis. Its the best place. Oh, I should have been more specific. I am still currently running the PDX right now so its only around 1100 watts RMS. The biggest alternator will be a 136A on a stock vehicle. I plan on upgrading to a HO (mean green or iraggi, which is better?) as soon as i buy the 3500D. I will get a Kinetik 1400 for the rear right now, and when i buy the 3500D, I'll move the 1400 up front and get a larger kinetik for the rear. So the biggest question now is, when wiring my new battery, will i NEED to upgrade to 0 AWG now or can it wait until i buy the 3500D? If i can leave my 4 AWG run for now, It will save me a lot of trouble. Also, i'm having trouble finding where to connect my engine ground the the chassis. Is anyone familiar with the 4.0L Inline 6 on a Jeep Grand Cherokee? BTW, all of my wiring is KnuKonceptz so it is decent stuff. Not looking foward to the extra $70 in 0 AWG wiring though. If you say this then why do you want to buy a battery now when you clearly dont need one right now? If you plan on running the PDX until the 3500D, you wont need another alternator in the mean time. If you do the big 3 in 1/0 now, which you will have to anyway with the 3500D, you will be fine with 1100rms. Quit trying to go the easy route and just get it done. As for Mean Green, never heard of em. Iraggi on the other hand is regarded as a quality product. There are a few others as well. Try drilling a hole through the chassis and use some bolts&nuts. That should work fine.

You can get sound quality from almost any sub (probably not at high volumes), as long as your box is built right and to how you want it then it should sound good. All that how you want it to sound will come down to the box and not the equipment. X2. You can get a $25 driver in a proper enclosure to sound better than a $100 driver in the wrong one. I knew there was something wierd comparing the DP. Its up to you because they are all great and will sound great. Pending above...

You can add pics to the gallery. I dont know exactly how cause I cant upload for some reason. I use photobucket.

Ok. Are you looking for drivers to put in that box or will you make another? That still isnt too much of a description. You listed the Q which of course is the SQ orientated driver while the DP I think is more SPL orientated. It depends on what you are looking for. Do you want to put up big numbers on the TL or have a groundpounder? If not then the Q or something of that nature can be reccommended.

Welcome dude.

Another stock alt is not going to do it with a 3500D. They are talking about specialized alternators for car audio if you didnt know. You will NEED one of those. Wait on the batt until you get the h/o alt and big 3 finished in 1/0 wire. Another batt is not essential right now. Yes you can ground to the chassis. Its the best place.

What do you do for a living? You are in Europe driving on the Autobahn while working? Whatever it is, sounds good to me. Sean is part of the MN Mafia, they run protection for all big/high end businesses. Dey get aloda busnis up der eh?

Im not on edge! Dont tell me Im on an edge! Lol.

What do you do for a living? You are in Europe driving on the Autobahn while working? Whatever it is, sounds good to me.

It doesnt matter which one you get. If you cant hold your voltage at 14.4 with a proper electrical then none of the Hifonics will produce their rated power. I have a BXI2006 on a 18" BTL and it is loud as fnuck. The amp does fine. Its my h/o alt that gives me the steady voltage to get the 2000rms out of it. Without it, you wont. So what your electrical like?

I alredy came to that conclusion myself but he has that much room per sub and not both. Aha. Ya, only room for 12's bud. I wouldnt try the 15s.

Heres the site. http://www.exileaudio.com/xi/index.php

If you want to go with something cheap right now then look at this. http://www.soundsolutionsaudio.com/store/products/Sundown-Audio-SAE%252d1200D.html But if you can save a little more then look at this. http://www.soundsolutionsaudio.com/store/products/Sundown-Audio-SAZ%252d2000D.html But this is perfect.

The alpines arent going to get you what you want. How much is your budget? Have you looked into 18's? You said you want to feel it. Try those. But really we need more info on what kind of electrical you have if you want to go big boy status.

Well what kind of budget are you working with?

You barely have room enough for one 12" BTL, let alone two. 3.3 ft3 is not a lot to start out with of gross volume. You should make that box as large as possible each driver. One 12 would be 3 ft3. Youre taking out the back seat and thats all the room you have?

This post doesnt really tell us anything about what you want from a system and those descriptions are basically about every driver here. How about a budget? Why just those 2 drivers? What kind of amp are you using? Give a little more info to help.

Sorry bout the little Colts-patsies whore sesh guys. I get a little out of hand during those games sometimes. And I had no idea about the start and stop page. I read all the posts since Ive been gone today about it and i get it. Im smellin what youre steppin in.

Ooookkkkk...sorry about that. I just get a little excited when we play the patsies. I'll keep my NFL interests off the board in the future.

Yeah I ended up flipping a coin and the Sundown Z15 won, so it will be one 15" in 3.36ft^3 @ 29hz with 50.75in^2 of port area. Thats some low tuning. It should rumble pretty well. The only thing I was thinking about was the vc configuration though. If you got a dual 2ohm, it might be easier to resell. You can wire it to 1ohm and back the gains way down. Most people dont have amps that put out 1krms at 2ohms. Just a thought since you know youve been eyefuckin that NS! Overall though it looks like a good start. All Sundown sounds great! Id put that board under the carpet as well. Keep the pics comin dude.

It was good, dont get me wrong, but Id have to say the 2006 AFC championship game was the best for me. That got us to the SB. I cant remember being happier in a Colts win. Once Jackson made that pick, I was jumping up and down, hugging people. After that I wasnt too worried by "good rex-bad rex". That one I knew we had wrapped up.

Probably. Best top 10 comebacks (which he has a couple of allready) or something. But you will see it on NFL replay and that is a fact. I'll watch that again.

Because why? I dont understand. Funny though. Baby mama drama is bullshit.