bigrank916

Here a litlle taste os some of this Cali BBQ with some pork baby back ribs. Looks good huh? Baby Back Ribs

What if I decided to go with the Hifonics Brutus 1210D vs the sundown for this 12"? I know if it was a FI-Q I would definitely use the sundown. But for the SSD, you think me shaving couple bucks will make a difference? Meaning buying the Hifonics over Sundown or not doing the big three to save jack? Im not sure which one you mean. If its a budget install then go with what is in it. Is it $200? No, Big 3 is a must in my mind. It was suggested that I should get the sundown amp. I did some research and also found the hifonics one. I was just curious if it would be okay to go with the hifonics or if i shouldn't. From what I have read, 90% of the time people prefer the sundown hands down, but there also pushing much more powerful systems. For a little more money you can buy the Sundown. Almost all Sundown amps rate their power at 12.8 volts versus a Hifonics which rates them at 14.4 volts. The customer service of Sundown is...well, look around. Its excellent. I prefer them no matter what power it is. You havent given a budget for this amplifier even though its been asked three seperate times now. All I know is $200 because that is what the Hifonics is.

Im in love...

If you own an 06 Envoy, why would you put money in deadening and fabrication for the door, if you are thinking of changing to an 07 like your sig states?

What if I decided to go with the Hifonics Brutus 1210D vs the sundown for this 12"? I know if it was a FI-Q I would definitely use the sundown. But for the SSD, you think me shaving couple bucks will make a difference? Meaning buying the Hifonics over Sundown or not doing the big three to save jack? Im not sure which one you mean. If its a budget install then go with what is in it. Is it $200?

Maybe some Chianti, perhaps?

The SSD would be a good choice and paired with something up to 1000rms would be appropriate. The ported enclosure can be from 1.8-2.5cuft and the sealed can be from .8-1.6cuft. They are both pretty small so space doesnt seem like to big of a factor in an suv. If she enjoys all types of music and isnt concerned about getting too loud, then I would recommend going sealed. What kind of budget do you have on the amp? One battery under the hood should be fine for a setup like this. Just do the big 3 so there is no chance of major voltage drop. You dont want her to ask why the lights are dimming, do you?

Try some Carlo Rossi Chablis, 2004. I hear its quite exquisite.

A little bit. It is Sundown in there already but it is only the SAX125.2 bridged at 4ohm which is around 425rms. I cant wait to test it with the SAE1200D!

Nice video and that 125.2 is doing its thing on that subwoofer. Yeah that video has me wanting to install mine asap, I only heard mine on home stereo at 8 ohms (so little rms) just to make sure it works. Thanks for the video man. Thanks a lot dude. The gain is only at halfway too. keep it nice and simple. I hate the volume on the camera though. This camera cant take the high volume inside my rides.

Sucks dude. Good luck with the alt hunt.

If the pos connection on the alt doesnt have a bolt for the power wire from the harness to run to, then you are screwed.

okay...but i though it was a pico fuse issue whihc is why you are getting a TON of feedback. an easy way to see if it the pico fuse is to buy one of these put it inbetween the amp and h/u rca's and if the noise is still there BAM it is a pico fuse! this is a ground loop isolator! and if you want i will sell you both of mine (whihc i don't use any more) for 20$ shipped! (since i live in canada shipping runs a little more) http://www.parts-express.com/pe/showdetl.cfm?Partnumber=265-012%20%20%20%20%20%20%20%20&FTR=ground%20loop%20isolator&CFID=3534447&CFTOKEN=32936016 and if it is just a ground issue these isolators will get rid of it for you 100%! hands down! (or SHOULD) Thats pretty funny. Definately...positively...certainly...maybe...hopefully.

You cant find where the positive connection is on the alt? Are you saying the harness with the plug is the only wires attached to your alt?

You arent looking to replace the wire right? You should be adding a new one and never should you attempt to take the stock ones out. It makes no sense if you are adding new ones, plus it adds more work.

My daughter and I were looking for songs for her school project presentation and found this in the while looking. I thought it was very funny.

I ended up buying one today after waiting and looking for so long. It is made by Triplett. I'll let you guys know how it works and include some pics or vids in action. http://www.triplett.com/product_info.php?cPath=22&products_id=37

Cant hurt to build another box if you got the wood already. Plus its fun too. And a little practrice never hurts either. I am guilty of the same. With my old system of 4 12s, it happened here and there. But since Ive had the BTL, I dont think Ive reached any limits so far. The excursion on this is nowhere near what I see on some of these videos. I keep finding new vibrations with every brave click of the volume knob! I see that smoke only for a second. Is that the dodge? GEEDEE UP! Plus I have shitty 4x6 coaxal plates in the dash with old 4x6 POS in the rear that I cant get to. I cant wait for the MLI65s.

Are you talking about the test tones or the video with the dome light? If its the dome light one, thats not his truck. Its spleddys 12" Fi BTL.

There is nothing wrong with doing that Chop.

I think what he should have said was "recommended". They recommend all the Qs in a sealed enclosure. After all it is a SQ driver so why not put it in a sealed box? Unless one is looking for more output, which in that case, maybe one should have gotten a different driver.

I just saw the video and I want to see that sucker in the light dude! At least you can hear the vocals too. My 18 is killing my truck and all the vocals. Thats was some serious movement with the 15hz tone! I heard somebody say there was a smell? Ooops! Just warmin em up!

What kind of wire is that on the battery ground? The stands look super big. I didnt think you could use that kind of wire. That looks like the wire that goes into the breaker panels of a house.

I didnt know that. Thats pretty cool.