just1moreamp

i have the 220amp alt it works fine for me

call this man tell him -jim- told you to call-----575-644-9182-----he will fix you up

this is the room i have for the box 45''w 24''tall 16''bottom 13''top---that all outside it like 9.0cf thanks for the help with the box

my friend has a 2001 s10 xcab and wonts to pound the groung he has a budget of $2500 and needs everthing--hu-amps-mids-hi--subs--box---what we have now is a used 225amp alt-$100.00 and 3-kinetik 800's-$275.00 new got a good deal--he's looking at a hifonics xxv colossus-$550.00--tell me what you think would be a good setup for the truck--he has $2125.00 left to spend let us no what you think

i think we have like 8.5cf net to work with he has no perfered equipment and the $2500.00 is his limit he just got married so thats it

just say no to the crap cap

i got 4 of the t3 12'' subs i will just call them junk thay will never get any more money from me---thay dont no what -cs- is---junk just junk stay away from junk

yes thay will work just fine // i run 6// 4''fans on my amps

what kind of truck//car you got // think you in need of a real alt

my box is 9.0cf net with 120'' of port for everday what i need is a port for spl this is in my ford explorer 4door i am runing 2--15''subs on 1400//1600ea rms and how would i do this do i make a port that i can take out and put the spl port in are what//// what is the best way to do a sq//spl port setup any help would be nice thanks alot

trying to get the most out of my set up // i cut the port out of my box 2day so i can do port swaps when i need to put up some numbers i wood like to try the areao ports how much will i gain with them

i wont to use the box i have and just do a port swap i did the port where i can take it out allredy so i just need to do a new port - i was thinking of going with 150sqin of port tuned to 40hz i no the explorer likes the 40/44hz range

do 4--10''ssd and get 2--aq2200d's and pond the ground hard

the port i have in the box now is 120sqin and tuned to 34hz what would be a good tune for spl --- something like 40/43hz any help would be nice

the usamps vlx400 will take 16volts all day no problem at all i have had a lot of the old usamps and thay love the 16volts and the vlx400 will make 4178rms on 16volt and 432amps of curent you have to feed the amp alot

i have seen -211mph on my bike the 1300cc and i have a 1990 mustang drag car 430ci -743hp and a 300shot of nos -- car has been 8.34et at 158mph in the 1/4-- it will go faster just have to drive it

how much port do i need for a 9.0cf box is 120'' of port to much port---like 16.5'' tall 6.5'' wide 16''deep i just dont wont to much port any help would be nice

get the new sundown 4500d and a 4.6cf box and it will be so loud your buddy will shit on himself if he thinks the mojos are banging

thanks shizzzon i wont to put a little over rms on them the rms is 1200/ i wont to put 1400/1600 on them

i think i got a bad board in my amp and thay just did not wont to fix that--are--could not fix it the one i have is the old one--not the new one just wont to let every one on that // when i got the amp it was new and i had it for a long time before i put it in my truck just so every one knows that i dont have any faith in the amps but thats just me

read this i had a COUSTOM set of 15''subs with a -rms- of 1800watts and one of them poped // i was asking if any one had any SUGGESTIONS on subs 4-12'' are two new 15''subs i wont to hit 150.0 on the TL in my suv i only have 9.0cf net for the box-----any help would be nice thanks

this is what i got the box is 41''w--18''tall---26''deep--this is all outside --the port is 3.5''tall---27''wide---18''deep----i think i have like--7.75cf net--port tuned to--33hz--can someone tell me if this is right----the subs are the--FI BL 15''---i will have a---ia 20.1--on ea sub let me no what you think and if i need to do something about the box

what can you do for me on -4- of the 4500d's --shipped ---pm--me and let me no asap i wont to try some of your amps and subs --nobody has any of your --subs are amp --where i am at---i by a lot of stuff and try it out that nobody arond here has--what can you do on --a kit like -4-amps--and some subs for the amps i have two -suv's---that are in need of -SPL- hook me up

i got my box done -man- that shit was loud--took it to a friends and put it on a -TL- did a 148.2--on the 5th--try i saw that magic smoke --- one sub is -doa- and the dustcap is -mia- so going to try something new like -4-12''subs mybe that will put me in the 150.0db range-----i did talk to the man that did the subs for me and he told me he would take care of it for me that it should not have blown on the power i had on them 1400///1600rms ea if you have any ideals on going -with -4-12''--are--something else--this is in a 1999 explorer--subs up port back--any help would be nice thanks

i have a--ia 20.1- and have sent it to -DB- to have it fixed 3 times and every time i get it back it works for like 2to3 weeks and takes a shit on me i am runing it at -1ohm- on 4=10''subs--i have a 300amp alt and 2--kinetik 2400 batts so i dont think it is the volts droping i keep like 15.3//14.8 at all time so i have to say the amp is -JUNK=