pimpedout97x

diagrams, with dimensions in feet and inches.

lol sry

well i need 4.5 cubes per 18, and you say i should tune to 16 or 20ish hz? thats what i need to get designed. ive got a couple options i have as far as space goes.... option 1: the red is the couch, notice it comes past the bathroom entry (not a door, just an opening) about 16". i still have plenty of room to get through that entry. leaves me for the desk/box: 39" from the edge of the couch to the wall (one sub box can go in there as part of the desk, as well as a table for the couch. then ive got that whole wall as well (115") I can build as far as my closet door opens, which is noted in the pic. option 2: red is couch again, goes up to where the closet door opens up. from the other end of the couch to the wall, ive got 24", then from there ive got 133", but can only be a width of 21" cuase i wouldnt want the desk to come past the bathroom entry. id also have to notch out for the window. what you guys think? i kinda like option 1 best..more room for the desk/box IMO. you guys gotta love my MS Paint diagrams keep in mind, im gonna build something similar to the desk diagram in the first post, but to fit in the space i have outline in the pics below. Two 4.5^3 boxes @ 16 of 20 hz i guess? 1: see pics below 2: see pics below

M5, its not about building, its just designing the box/port is what I can't do. I have diagrams and measurements of my room, ill post them tomorow, as my internet is down and I'm posting this from my phone.

lmao!

z0mg i w0nder if th3y'r3 l0ud3r tHaN teH 3min3nc3s!!!!!11!111!1one!11!!1!eleven!1!11111!!!!!

and to clarify, by 2x4s, this is what i mean. (from my old wall) except on the desk, itll be like 10" high, so itll be 10" of solid 2x4s in between the desk and the sub box, i think thatll stop the vibrations.

could you help me think of some way to do this? what if instead of two 4.5 cu.ft. boxes, i one 9 cu.ft box, but in the center, i some how build a notch for my feet/chair to go? would it be easier that way? then the box would be like 21" sticking out from the wall, how ever high, but it would be really long.

ok dont laugh at my ghetto sketch-up. now, since it came out un proportional, ill explain what the red is in the pic. under the red strips is the sub box. the red stripes are actually the 2x4s, about 10" of 2x4s, not only to brace, but to raise the height of the sub boxes to the height i need the desk to be. (the 2x4s wont be seen) then on top of all the 2x4s will be the top layer of birch, for the top of my desk, then the shelf gets built from there.

what voice coil is your sub

well the length and width i want to keep to a minimum, and i want to keep it square. so it obviously has to be big enough to fit the 18" in it. so a couple inches bigger on the length/width would be cool, like 21 x 21, and then make the height what ever it need to be to get the 4.5 cubes. if the heigh is going to be really high, then add some to the length/width to take off some of the height. how should i do the port (sub down firing)

i need someone to design me a 4.5^3 box so i can start this desk lol.

nice. how do you like that reciever? is that a HT reciever or just a stereo reciever?

oh, your first post and this thread is referring to the hk802sx lol...

bump... i wanna start this soon, i think with enough bracing i could make it work. really all i need help with is the boxes...should i do the two 4.5 cu ft boxes?

ive got 4 hk4000ds, ill be running mine @ 2 ohm on 16v....should be around 3500ish watts each. but ya thats 802sx isnt gonna do 6k lol

ya, id use MDF, then for the last layer, just put some 1/2" birch, or even thinner, just to stain it to have the nice finish. this is going on a second story, so id have to build it, take it up there, then brace it in my room i guess lol. im gonna be starting this soon either way, cuase we're moving in this week, and i want a desk lol. why so low of tuning? mark @ mach5 told me 30hz...or could he have been mistaken and thinking i was using this in my car? i thought you tune that low when its for HT (movies, etc) this is strictly for music only.

i dont really sit there and write or anything, its just when im on the computer. plus if was doing HW or something, i wouldnt have the radio on lol

ahahahhahahahhahha if i go sealed, what size should the box be? also, if i do the desk thing, its most likely gonna be the box, then ill build like a "false floor" type thing to raise the height of the box (so the actually box itself wouldnt really be the top of the desk) then go from there. Jim, the room is pretty damn small, i have 2 rooms in my new house, the other room will have my bed/dresser/nightstand/etc to sleep in, this smaller room (back of house) has a couch that takes up one whole wall, and i still need a desk, the sub box, and to fit my 2 speaker towers, not to mention somewhere to put the reciever/amps/etc. also, im gonna be getting a PC soon, cuase my laptop is like 5 years old and its turning to a POS...so the PC would be on the floor, only thing on top would really be the monitor, which might not be true becuase eventually im getting a wall mounted LCD so that would be my monitor....

4 of my 15" recones, next to my friends 18" mt since im reconing all my mts, we blew all 4. in the process, this basket broke off the motor the voice coils. the one that is un wound came off the motor with the broken basket lol. we pushed that bitch hard..... baskets and last but not least, the motors

lmao we have no deer or moose in my area... we've got homeless bums haha

not here yet, hopefully in 3 weeks or so. but i ordered them (about a month turn around time) Anella AN540's, all black, 18" toyo proxes FZ4 215/35/18s http://superbuytires.com/Anella/AN%20540 gonna black out all the chrome accents on the mini (unless i put the rims on and i like how it looks with the chrome...) and im gonna get the MINI center cap to cover over the Anella center cap logo. 600 shipped for brand new rims and brand new toyo proxes....not bad

hahhahahahahahahah

i like those horns lol. im gonna have some firing out like that, but not outside the car....theres plenty of cars with horns outside... and yes, it is a florida thing.

15" stroker, 18" mt