pimpedout97x

i have a 160gb ipod. i wanna try out a carPC though, with GPS, etc. plus, i already have the Coustic XM6 crossover. what would u do in this case?

how would i do that? also, i want to be able to easily control the volume of the system by a KNOB, not through the PC, and i will most likely put that sound card by the PC, so i want something on my dash for master volume. could i use the EQ volume knob?

it was for preouts, but i guess if i run that sound blaster, i wont need the HU. should i still run the Clarion EQ i have? soundblaster out, to EQ in, EQ out to coustic xm6 in, coustic out, to amp in?

why?

There are 1/8" stereo to RCA adapters Pretty cheap at PE or Guitar Center... wouldnt that be the same as just going stereo 1/8" out from an on board sound card, to RCA inputs on my HU, then RCA outs from HU, to amps? i still have my HU

i dont see left/right sub, front, and rear outs?

im looking, dont see any. mind posting a link to one?

how will that sound though? im going to be using the PC to play my audio all the time...id run digital audio or optical, i just need to find a processor that has rca outputs for the sub/front/rear, and digital/optical audio in to accept from the PC. and i could replace my HU with the new processor.

not much done today...by the time i got home from work it was 5ish, then had to go somewhere at 8 so.... ill do this to the other side tomorow probably. does it sort of make more sense now as to why the sides are like that? just to throw this out there, i AM fiberglassing the ENTIRE interior of the box for added strength, and to ensure is 110% air tight.

not bolted down yet. deleted the rear wiper. that plug will be there until i get a rear back up camera. im selling my Nakamichi head unit, as much as i like it, but i want to get a double din screen with Navigation. ill have to relocate the a/c controls, etc

test fit this may give you a better idea how the sides will be, notice they are flowing the contours of the side panels put the back on

no i dont drive the explorer, but i can still drive this while working on it. i just have stuff inside taken apart right now. still driveable though. just got back from the tint shop, got 15% thrown back on the windshield (got glass replaced a few months ago)

cut the odd side pieces out. most of you will be confused, but im gonna get more done tomorow, and you will understand as the pictures progress, as to why its cut like it is. 9.5* angle dry mock-up sorta what im going to do tomorow. the sides will extend out with the side trim, thats why the side pieces are cut like they are. one of the 18s, i may not even use this, im not sure yet random pic glued the sides down

last one was birch as well...? thanks

cut out the back/bottom today.

very nice. i love those tires, i had them on the mini cooper in 215/45/17, and sold the 17s and got 18s, with the same tire in 215/35/18! love em, and they're CHEAP!!!!

while that would be a great idea for the side panels, for me, its easier (still time consuming) but alot less messy, to just make a card board template, then trace it onto wood cut out the bottom piece of the box. i need to get more Birch.

no i dont. my explorer is sitting right now.

yes im starting over lol the door panel goes in that hole, idk its just the way the door is.

ya, the runflats were very bad, treadwear, and ride quality.....

reason you cant find the neogens, is becuase i dont think they're made in 205/45/17. get the ones i have now, 215/45/17 http://www.discounttiredirect.com/direct/f...rd=17&ar=45 93 bux each, great ride, grips very well in the rain! Z rated

WTF!!!! LOL! i have the Nitto NeoGen's on my mini, on the stock 17s, but i stepped up to 215/45/17, get a little bit wider of a tire. i love them! only 96 shipped each when i got them, new i hated the run flats, they were HORRIBLE. i just got some new 18's though (konig hotswaps) and got the same Nitto tires, for like 112 each (for the tires) in 215/35/18. havent put them on yet and drove with them comparison pic ugly runflats pretty nittos that you want

i know, its been a while, but i was help up by my interior guy, he was covering the back side interior panels, and i couldnt put the box in, until i got those back...but i got them back, and heres what ive done in the last week or so. mrray came over to the Mini forum, so i figured ill just start posting here again all the pics. this is copied and pasted from my other threads, i will start updating this thread on the regular though, until its done. pics starting in post 2. PS- if u dont like what you see, please press back on your browser. dont crap up this thread please. im learning as i go too, as this is my first wall build by myself 100%...the one in my explorer was built by Robin, i learned ALOT from him as well, props to him for that. anyways, pics in a sec.

temp lil setup to see how she sounds using a old kicker kx1200.1 to power it, but the sub isnt mine (same model ill be running though) but i cant wire it at 1 ohm, its at 2 ohm, and that amp only puts 600w @ 2 ohm, and its still loud for 600w! imagine when i put 3000 on it!!!! a mess my car smells like wood, LOL

lol