CrazyKenKid

lol it sure is!!

you are quick! that was my next question! lol! this device almost looks like a pre-amp

you mean this bad boy? http://www.samsontech.com/products/productpage.cfm?prodID=1755

that sounds about right and i remember somethign about a 10 going around.. lol

so you are saying heat up the lug and then put the solder in it! i think i will be doing this on the next instal! thanks for the advice!!

NICE!!

well they are nonbelievers b/c i am also a non believer until i seen the number lol. but realy i would never have thought a single 8" could do over 150db's lol. but then again a 8inch sundown jsut isn't a normal 8inch sub either lol.

nice!! and wasn't that on like ~7k ish. i am looking for the thread but i am coming up dry. i think i remember that number.

holy cow your amp accepts 4/0!! wow beefy!! or do you mean 4guage? lol! check this site out http://www.hifisoundconnection.com/Shop/Control/Product/fp/vpid/1557428/vpcsid/0/SFV/30046 and somewhere on this site, i just can't seem to find it right now lol https://weldingsupply.securesites.com/cgi-bin/einstein.pl

i have never used either of those amps sorry. but i know sundown audio has a saz3500 and saz4500 and a saz3000. and all those amps do way over rated power on 12voltS! but ya as for pricing you cna get a saz3500 for around 700 and a saz3000 for about 550 and the 4500 for over 1200 lol! but ia m sure you cna find these amps for cheaper if you look around some! (used that is)

wow!! nice number!!! what were the ns v1 numbers? 1xx.5...my memory is failing me in my old age lol.

by the first one you mean this one right? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290366545106&ssPageName=STRK:MEWAX:IT which says This Handheld Wire Crimping Tool is a must for any Professional Car Audio Installer or serious Autosound Enthusiast it also says this is for standard and not oversized wire..umm interesting to note! thanks, i wll make sure i read up on it more before i make a buy! but really thanks a lot for your input it has been a great help so far! you rock! thanks again!

hey i found that one on welding supplies! https://weldingsupply.securesites.com/cgi-bin/einstein.pl?Next::1:UNDEF455708:AND:04040 8$ cheap!

so maybe using both the hydrolic and the soldering tool would be ideal then!

thanks!! this i wnat to see!!

That would work. Does not have to be anything expensive. A larger one would hold more fuel, but anything would work. Check out Harbor Freight if you have one. I crimp one side at a time with my wire cutters to get a closer fit the heat then lug and let the solder run into it to fill it up. i don't know the hand hydrolic pump sounds preetty solid! but how solid is the solder?

mini torch..like this? http://cgi.ebay.com/900-227-Butane-Mini-Soldering-Torch-w-CPSC-Approval_W0QQitemZ350291940001QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item518f06d2a1 and thanks! also for the hydrolic crimper do they make a SOLID crimp? steve siad the first 2 are a bit clumpsy so i guess how solid the first 2 would be, woudl depend on my strenght?

i am leaning towards the hydraulic one myself, b/c it is a decent price and i ALWAYS have a air line present! thanks! anyone else?

well double the power ~ = 3db on the meter. but 1000rms is still 1000rms! the way the sub handles the power and the for a burp at a given tone how much the impedance rish and all that other fun stuff! i guess all in all 1000rms is still 1000rms so they sound the same lol. but not really! pending on name brands and what not! but lets say you are comparing a z15 to a nsv2! which one sounds better? the z15 due to how it is build but with a 15inch sub ported who cars how it sounds!

It's on bulgarian. You wont get a thing Well you asked : http://tuning.bg/forum/viewtopic.php?f=27&t=54742&start=1230 lol~!~ nice! o well i don't understand a word or symbol!! lol! !

post the link!! tthis i want to see!@!! or better yet whihc forum are you refering to? crapaudio.com? lol

damn over 150db's with a speaker even smaller then an 8inch in a seal enclosure lmoa!!!! did that cost 1000$ plus? lol jk!! nice

ya we don't have a deans list over here in canada lol! we have smart f=in kids and ones who drop out lol! right now i am majoring in instrument control engineer technology. and i got a coop coming this summer were i am offered 33/hour. as for that i am taking electronics 3 right now i and i have 1 more to take and math 3 and math 4 to come lol and bunch of other hard clasess lol. which all equal to one big pain in my ass lol!

aww calc! right now i am in 3rd year calc! it is a pain in the @$$ lol!! i hate it! but i am doing well! i just wrote my ele 3 exam today! i think it went off without a hithc! and i am sitting at 3.8 on my digital logics class!! that class was easy!!

o i love college! lol! i am currently in college and i am doing exam's!!