CrazyKenKid

congrats man! it is a killer amp! also don't forget to leave feedback on this site about sundown!!

you know what you need!! you need a secretary! one that looks like this! and when she isn't doing e-mails or paper work put her to work in a bikini washing your vehicles!

i had both the SAE and SAZ amps and i had the power to back it up! once i got the saz it made eveything so much better b/c i had the electricall to bakc it all up!! SAZ ftw

i am pretty sure there aren't any fans on sundown amps

so the new tuning is 34hz! nice!!

lol 3hz tuned DAMN how do those sound and what does your port look like lol!!

contact jacob about this and go from there! [email protected] and good luck man! and jacob is very nice to talk to and very knowledgeable also!

lol don't ever say that to a girl lol!! but i would guess maybe 20lb's! lol

wow that is a like a little tank of subs!!! very nice!! props to you!!

are you refering to the xmax of this sub being 20mm WOW (0.78 of an inch (3/4inch) ) very nice!!

wow most definitally looking forward to these subs coming out!!! maybe my next build will be 6 of these on my saz2000 lol jsut to switch it up!!!! lol you never fail to amaze me jacob! you are the man!

any pricing ideas? and that is a pretty small enclsure! i wonder how 6 would sound on 2krms? any idea's?

wtf? that is an 8inch sub? wow nice!! so what kind a RMS can it handle and box recommendations!! lol wow

WOW looks very nice! plus those ports are huge! lol you can almost fit another sub in them lol!! CONGRATS!!

10-15ft if only one run for the big 3, but if you want to double it up get about 25ft and some fuse holders with 350amp fuses!! and take some pics!

one fast question you meansioned you will be using a 350amp external fusing for this amp? I would suggest going with a 300amp fuse ONLY b/c that is what is recommended on the sundown site http://sundownaudio.com/index.php/products/amplifiers/saz-3500d.html also for sure i am looking forward to this install!!!

sounds good don't forget to do the BIG 3~! and post pics!! and video's!

very cool! and very nice and clean job! keep the pics coming!

just in case you run into an issue with wiring the sub here is how you do! http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~1~I~22

First timers! we all were there once! lets see if i can help you out some! correct you need to wire the sub to a 1ohm load and yes only use A or B not both! and to wire the sub to 1ohm put all the pos together and all the negatives together! on your h/u turn the volume to 3/4 turn the bass boost stuff OFF and sure put the sublevel on 15! now DISCONNECT the sub from the amp Hook the dmm up to one of the terminals (a or b) Set the dmm to AC voltage (a/c has a ~ line ontop of the V ) set the gain on 0 (all the way left i believe) phase 0 subsonic set it to whatever your box is tuned to (if you box is tuned to 25hz set the knob straight up) LPF turn that to 80hz bass boost 0 NOW insert the 50hz press play watch your dmm a/c voltage increase as you turn the gain up once you hit the desired number (31.6) stop the test plug the sub in and go from there!!!! as for the RCA it doesn't matter b/c this is a MONO amp so you can put either red or white in either hole! i hope that helps and good luck! and take some pics also! Kenneth

make sure you take a bunch of pics and post a install log!!!

ya most likely stolen or someone was in such a bind they just had to flip it any way and couldn't wait!

wow lucky guy you are lol!!!!! i wonder how much the pawn shop gave him for the amp and also how long it has been on the shelf for lol!!

I would say give this site a try and if you can't find it give them a call! http://www.motorcityreman.com/high-amp-alternators.html

60-65lb ish