altoncustomtech

Happy Birthday dude!

Thanks guys! I had a pretty decent birthday! Damn you're good! Got that engine ordered today!

Well, just ordered the engine. I went ahead and ordered a Marshall reman engine with its 3yr/100,000 mile warranty. I ordered it from a place called Stylin' Trucks for $1467 shipped to my door plus the core return shipping. Pretty decent price I think.

I'm not sure what the issue is, I haven't had any issues at all flush mounting with my Jasper jig. Aside from times I've used it for a couple of local guys I flushed in the rings for my components in the door baffles of my Jimmy and most recently the enclosure for the subs. I also don't understand breaking them. Accidents happen I suppose but fragile? The Toolmaker one sounds really nice though, I just don't understand why so many hate the Jasper. I've yet to have an issue with mine.

Thank you guys!!! I really appreciate it!

LOL, thanks, but there is no "comfortable" for me when it comes to spending $2k. It's not easy to get the money, so if anything goes wrong I'm screwed 5 ways from Sunday.

Yep, they have a pretty good price on it too, very hard to beat BUT the shipping charge doesn't include shipping for the core back to them which makes it about the same price as going to a couple of local stores and buying one from them w/o the shipping involved at all.

Yep. just to add a little something to the strength of those corners. Not completely necessary, but it also gets the internal volume dead on. Not that that's completely necessary, especially in a sealed enclosure, the 45's only make up like one or two hundredths of a cuft of volume but I like it when the numbers are right.

Oh, believe me I know. Hell I've been to the plant here in Jasper Indiana a few times. But I called every Jasper engine dealer in the area and couldn't find one for under $2k and that's the limit I have to spend on getting the engine replaced/rebuilt.

Well, forget S&J, too many complaints and they're too far away to worry about dealing with any sort of warranty issue. I've had the old tried and true Marshall name brand reman engines thrown at me by quite a few people. I can get one for ~$1400 from a couple of sources so, any opinions before I throw the money at it? I'll be ordering the engine before the end of the week as I'd like to get this thing back on the road in the next few weeks.

I've already got done almost everything there is for these without higher compression pistons, hotter cam, head/intake porting/polishing, etc. etc. It's got the CAI, a tuned PCM w/O2 delete, and modified exhaust. Only thing I have left to do to it as far as performance can be done without major engine internal work is replacing the clutched fan with electrics and putting a tuned exhaust on it, both of which are on the books to be done. Now, the thought HAS crossed my mind to drop the long block in it now, rebuild this engine WITH all the performance enhancements, then get the PCM reprogrammed for the mods and drop it BACK into the Jimmy and put the long block build into the Blazer. Now there's a nice option! On another note, anyone ever done any engine business with THESE GUYS? They've got a very thoroughly laid out re-manufacturing process and a 7 year, 100,000 mile warranty.

If I didn't need it running ASAP I might consider it. Plus as another person mentioned the cam/balancer bearings are probably going to have issues as well. I am considering the engine a total loss for now and going to look at the best place to get a good, trustworthy long block. I have the funds at the moment to get one, I figure it will be the best route. Then I'll take the time to tear down and rebuild this one and drop it in the '98 Blazer I got for the purpose of rebuilding. LOL. If I wasn't hell bent for keeping this damn thing I probably would sell it. As it is now, from here on out, CAI or not I'm steering far away from the deep waters. Next time someone calls cuz they flooded their vehicle out I'm just going to politely say, Sorry I can't help you.

I can't lie, the thought of dropping a small block in it has crossed my mind, but it seems like a much more expensive endeavor than just replacing this engine with another 4.3 AND keep all the fuel injection stuff. I've seen the "kits" for doing it, changing the wiring harnesses, changing the PCM, etc. but like I said it seems more expensive and like a great deal more work. My whole issue with a pull apart engine is the warranty. You NEVER know for sure what you're getting when you get one and I've seen quite a few people go through the trouble of pulling too many engines just to end up with one that is finally quiet, right up until the 30 day period expires and then they trash out too. One friend in particular had two different full size Chevy's and did the pull apart engines with them about six times per truck. The first one he wrecked before he got a good engine for it, in the second truck the last engine lasted four days past the 30 day replacement warranty before it spun three bearings and was toasted. Some people have luck with them and are willing to gamble it but I'm a little too weary of them to go that route. Liability only, don't see the point in fully insuring a 12yo vehicle. Crap, you just found it. Since you don't have it, I'd do what the insurance company would and part it out. Water gremlins will chase it for years. Sean is right on the money with water gremlins. I have seen cars brought up from down south that went through flooding and were sold as R title and the people have had nothing but issues even though the major issues were repaired. Liability only, don't see the point in fully insuring a 12yo vehicle. Crap, you just found it. Since you don't have it, I'd do what the insurance company would and part it out. Water gremlins will chase it for years. I guess I should have pointed out that the truck didn't get COMPLETELY flooded. I put a K&N cold air intake on the truck last year which points down and puts the air filter about the same height as the bumper. Damn thing acted like a straw for the engine and sucked it right in. I didn't even get any water standing in the floor boards. I can't imagine that enough things would have gotten wet to cause any water gremlins from it no deeper than that was. I think I'm just going to find a remaned crate motor. I'll get a good warranty with it and won't need to worry about how long it will last in comparison to a junk yard motor. Then I can pull the truly ruined engine from the '98 Blazer play toy as the core and work slowly on fully rebuilding this one from the bottom to the top to drop into the '98. The more I think about it the more that seems like the most reasonable thing to do.

Liability only, don't see the point in fully insuring a 12yo vehicle.

That's where my thoughts were going as well. I don't think there would be much to machine at all, but the cost of having it boiled out and figuring out what all parts it will need and everything is a bit overwhelming to think about. Yeah I appreciate the help dude, I really do. I only wish I could have either known the road I was on was flooded or that I could have stopped in time.

Sorry, thought it was a little more self explanatory. 2001 GMC Jimmy 4x4 with 4.3l Vortec V6.

Damn, file won't play on that site and it's 251MB to download, too much for my slow internet connection to do right now, lol. A little is better than nothing and depending on how much you put on there it may still be fine. 25% coverage is about the best amount of coverage to use since more than that is generally a waste. A full treatment (including CCF and MLV) would help more than you can imagine. Hell just the CCF in the Jimmy made a world of difference.

Where's the Dynamat? I'm not seeing the whole picture I'm sure, but all I see is the factory plastic vapor layer. You might have to trim the plastic ring that fits up to the speaker from the door panel a bit, but you can definitely benefit from a simple wood baffle. Being bolted almost directly to the metal like that without anything on or around the speaker is far from the right way to do it.

I'm tryin' hard brother, real hard, to make it happen this year.

Thanks man. If I'm lucky you may be able to see and hear it at Slamology.

I hope so.

I would imagine that information should be around here somewhere. to the forum!

Awesome! to the forum!

Loving the progress Chop.