alexj01_83

epicenter....... when/why do people use them..... are they a waste of money??

how so ??? whats the diff between the three???

i had one used it on two orion cobalt 12's in 4th order very good amp wish i still had it was 16 didnt know what i had sony is junk now

i sent you an email trying to spend some of this arab money

To figure how much air a specific subwoofer should need using the information like, (VCdia: 1-1/4" *Impedance: 4 ohms *Re: 3.6 ohms *Frequency range: 45-1,500 Hz *Fs: 45 Hz *SPL: 82 dB 2.83V/1m *Vas: .24 cu.ft. *Qms: 2.68 *Qes: .61 *Qts: .49 *Xmax 9.25mm) and does any one know a good thing or two about designing t lines.

I had a 2k6d it didn't like being ran at 1 ohm (rated @ 2 ohms) when it got hot it it would go into protect if i tried to get loud with it. very power hungry also. i would stick with the sundowns. that's what i switched too and no problems. I would only use it if i got it for cheap. if you blow it i doubt you would get allot of cs.

I bought this speaker and put it in a prefab box. it does good but i think it could do better if it was in a better built box.( moves allot of air) it is in my room something the size of a dorm room. I use it mostly for music, I'm thinking maybe tuning it to 35-40 Hz. I would like to put it in a t line, but my box desinging skills are not up to par. Could some one help me out with some dimensions??? I'm not looking for sq. I know its a small speaker, but I'm in Iraq right now so I wanted something that Can pack up easily. and not take up to much space. Below is the speaker and the amp i have. Thanks for any help u can give me. The amp i am using The speaker

Can any one post a tutorial( or show where one is) on how to set up the gains using a oscilloscope ???? ! would like to set up my stereo that way if i could figure it out.

one more question if i do that what happens when i set up my eq ???? do i just forget about it leave everything at o on the deck ???

Velleman HPS10. ~$150 IIRC Thanks also found one on ebay for 140.00

thanks.....

My belt is just a flat multi-rib belt my point exactly if i dont have any problems with a v belt you shouldnt...... an alternator guy told me the same thing he said for an alternator putting out more than 150 amps i would have problems, so i built my own altornator, made sure to buy a good belt, the cheap belts will stretch and burn up and break or glaze up and slip. i have a 350 amp so you should be fine.

im looking to get one a handheld what is a good one for under 300 dollars???

15/32 thats how wide it is on top its a v belt

all you have to do is get a smaller belt that simple go to auto zone after figuring how small you need mite be 2.5 inches or so depending on the number of reduction pulleys you are using mite take 2-3 belts be for you get the correct one so just go with a cheap belt till you find the proper size some are like $30 were other are like $12.99 i have a single groove pully on my 350 amp alternator just dont buy the cheapest belt u should be fine witha four groove mine doesnt even chirp at full tilt no problems.

I bought two brand new dd 3512's I thought they blew but when they got to dd they said that the motors had shifted. Then they asked me if i droped my box or if a had gotten in a car accident. (which i hadnt) they fixed them and they are on there way back I was wondering if this has happened to any one else??? im running 4 subs all 3512's other two where fine.

Stupid since 12ga will do. Twist caps are for solid core wire. True.... but at times we do things that work good and are reliable in our builds, even though they weren't intended by the manufacturer to do so.. that said i use the twist caps they come in handy and are easier to use especially if u have dd subs.

thats sick man thanks yes it is im powering two 3000ds with the 350 version got the parts from there, voltage stays in the 13.5 14.8 range

check this out almost makes me wish i had a neon

It's gonna be a week or two on 15's. I got rent to pay =[ If it was the first of the month I would have all of them. BUT. Opinions... Trade 3 Kinetik HC2000 for 2 Turbostart 16v batts AND the charger for them. STRAIGHT trade, turbostarts are floating at 15.7 apiece. I'm going to be running a dual charging system, 250 amp 18v alt, and a 170 amp 14v alt (already have it). If I get the 2 turbostarts, I can get more powermaster S1000 16v batts from mechman pretty cheap since they came out of a show car. Then get the 250 amp 18v alt from him also later on down the road. The 14v alt will be in the stock location, then the 18v will be in the smog pump location (not required in Arkansas, no inspection) and the only the 18v alt will do is charger the 6 16v batts and run the diablo 8.1 =] The 170 amp alt will run the car, and my mids and high amps. Tell me what you guys think on the trade.. PS - Listened to the 15's today before he takes them out...and man they pound..running on a Cadence Z9 at 1/2 barely flexin'...can't wait to see them movin at 10Kw i have an 83 olds same pully system i have two alternators also except i put the smaller alt at the smog pump and my 350 amp in the factory location i was thinking about where to put my third one my ac still works. i was going to put it right beside my 350 amp and fab a bracket up to hold it. if you know how to take an alt apart u could build your own for cheap with an adjustable reg so if you decide to run 12 volt or 16 volt u can use the same alt. when i say cheap i mean around 290 for 350 reliable amps. u just need to find a core at a junk yard doesnt need to work as you will be replacing almost everything inside it.

i got mine from wal martno prob except to much power :bigclap:

how long do you have to break in nightshades befor you can play em loud

im thinking about being done with the idea of twelves all together what do you guys think one sundown 18 or two 15's can they handle two 3000ds strapped daily at 2 ohms. i wanna move some air they will be going in 88 delta, but i have a 92 honda accord also which i have thought about using i am wanting to get in to spl wich would be a good starting point.

it was easier and loud when i strapped my two sundowns, all i had to set was one amp so all my speakers were on the same page, i stoped by wal mart and bought a set of rca's split em and used the on my br out and br in