Kusan031

i actually just finished a setup like that. diamond d3 8" d4 in a sealed box off a d3400.1 amp, used 1/2" MDF (no double baffle). works just fine

dayumm, BMs running on the big island already. And i was really thinking about ordering one direct from SI. Let me know if you wanna sell that BM when you get a Mag

try back later. that happened to me once upon a time. it eventually let me in

i second that

i was lucky to get my hands on one of them gotta build me a box so i can do a review on it

you're not talking about my RL-p are you? haha i think im gonna be running it again this summer. idk if i should get rid of it anymore =P. decisions decisions. we'll see though

i had my RL-p15d4 running off a JL e1800d. never did reach the 1000watts the amp is rated at because it got more than loud enough for me at 800. (cone moved a lot**) i personally keep mine @ 600watts. im not 20 years old yet, and i dont wanna be losing my hearing anytime soon

nope, that video isnt mine. i just finished my 3.15 ft^3 @ 28Hz box last night. i'll try to post pics in a new thread

just got everything set up. found out that i was running about 450 watts into it on a daily basis. and i found that i was clipping the amp about once or twice when slamming it for about 5-10 seconds each. thank goodness i got everything set properly. and yes, 500RMS does get this thing LoUd. imma believer =)

well yes it is definitely loud for daily use. but during dB meters when you get the urge to turn it up 'just a little more', i wanna know just how much i can feed into it safely, especially with the output of the amp which is "a lil' overkill" [stated by mike]. other than that, i got my DMM last night, and i will sett everything today

is there a tutorial online that shows how to use it in simple words?

does it have to be a good quality one? or are the ones from wal mart enough?

okay, my e1800d input sensitivity is set @ about 60% now (1o clock position) and when i turn my vol up (20 of 34) it doesnt seem to show a lot of excursion, maybe an inch total. this is also with the EQ on my HU on "xplod" (sony). (MY 40A FUSE HELD AT THIS VOLUME) now i wanted to ask before i fool around with my input sens. because i do not want to blow my sub. i know my RCAs are rated @ 2V, but im not too sure how much its too much on my amp.

SXs are usually dual 2s right? my amp is only 2 ohm stable..

i currently have an RL-p15 that i consider my baby, powered by a JL e1800D amp. since i dont full on pound the RL-p i want to get a 12" sub that would handle all the beating of 1000 watts on a daily basis. im thinking of eclipse or alpine at the moment, but im open to any suggestions. oh yeah, and as much as possible id like to stay under $260