Optimus_Prime

Fallen is badass my 2 drop in boxes were from him side firing, heres a vid car wash was swaying http://www.youtube.com/user/06chysler300c?feature=mhum#p/a/u/2/-dzunkciJi8

Same thing with my xcon but my sub has a-lot of mechanical noise.

from looking at your vehicle 12's are your best option 15's wont go unless you build a wall, plus with 12's you can optimize the enclosure, and im bettin you want to play the lows.

what subs?

My 270 xp alt did 200 @ idle in a small case GM

what amp are you lookin to run

And of course this all boils down to what amp u plan on running.

I have personally owned one and, DC power is solid, 12.5 - 13.3v SAZ-4500d wired @ 1ohm, music small yellow top and hc2400 at 3/4 vol idle, 13.8 dropping to 13.1 with an occasional 12.7 with some throttle full tilt. And as with all alts heat plays a factor and results varied. My ECM liked to play it cold at 15.2v, hot 14.1 - 14.6 idle no volume for reference. As far as customer service Rob got me the first time direct fit and answered the phone an understandable 80% of the time.

not sure of price but sounds in same range as the dc power alt i would go dc power on this one as they are overbuilt beasts and do some major output at idle.

how much is the alt going to run you.

you want to run the stock alt and add a second h/o alt

Not sure if all DC alts have same nut but iirc its 8mm. And if so might wanna pinn as i did lose the nut while running 2 runs 1/0 and had extremely tight space to work with.

That alt should support a 3krms setup as long as you use 2 batts IE: yellow top and kinetik 2400 and upgrade wiring to 1/0 minimum, and some common sense goes a long way.

Here are 2 of my fav cables, on left is 2/0 welding flex-a-prene and other is kicker 1/0 both are nice and flexable, i opted to do 2 runs of the kicker since i could only find it in 50' spool, and supporting 5kw, but one run should be fine for your goal. the major benefit will come with 250+ amp alt.

Beautiful box bangin, argent will soon be shipping a new home for my xcons.

wow pm me.

Dc Power FTW, Just hope that don't happen in an 00-05 Caddi deville, cost me 400.00 and some change to have it installed on top the 700.00 for the alt, and trust me this is not a DIY job on this vehicle. DC power is solid, 12.5 - 13.3v SAZ-4500d wired @ 1ohm, music small yellow top and hc2400 at 3/4 vol idle, 13.8 dropping to 13.1 with an occasional 12.7 with some throttle full tilt. And as with all alts heat plays a factor and results varied. My ECM liked to play it cold at 15.2v, hot 14.1 - 14.6 idle no volume for reference. As far as customer service Rob got me the first time direct fit and answered the phone an understandable 80% of the time.

Pics, vid. Not that i don't believe you, just love to see this in action. Congrats BTW.

What vehicle.

Like what im hearing, gonna run 2 12cons on 3kw+ and from what i hear they step up to the mic and deliver. Not to mention the WTF u got in there's.

I think youd be better off with the 2 icons for a couple of reasons: thermal capability, less wiring, more manageable, and enclosure optimization. Just my .02 cents. either way you will be happy but with the 2 icons = more piece of mind, and as mentioned above greater chance of selling them.

CRAZY SHEIT, Sorry to hear about the arm man wish you a speedy recovery them arms are crucial for grabbin the wheel and splittin them gears. Hope i never go through or see some shit like that. Thought id share a pic of not a wrecked BIG RIG 60m concrete pumper since were on the big rig subject.

What would be the best amp to power a pair of xcons for daily, thinking of going with mmats, anyone have any experience with mmats. open to all suggestions.