BassHead24301

Much thanks for all the help and sorry some people here like to be a smart a** and start arguments with you.

M5 I have a quick question. I was checking prices to see what it would cost to order my first BTL and was being charged for shipping. It is posted that shipping is offered free to the lower 48. I am in virginia and still being charged for the shipping. I didnt actually complete the order because I was checking prices. I was going to check on this issue before actually going through with an order. Much thanks for any help with this issue.

Is free shipping still offered to the lower 48 states and is virginia included in the lower 48?

The electrical will be upgraded. Im definitely not even going to try running just one of these amps off the stock electrical. I believe electrical will be upgraded along with a 2nd amp. Stock alternator is only 95 amps so it has to go.

Thanks M5. What do you personally think about the 2000 RMS @ 1 ohm? Should that be good for 2 BTL 15's in my ranger? All I had last setup was a 1500w max crunch and 2 type r 12's in a prefab and it shook people around me.

I will go with the 15's. With the budget im working with it will take some time to get it all finished but im determined to get it. I am guessing I will get another PRS-D2000SPL. Not sure what it is but I usually like to keep the brands the same and not have several different brands of equipment. I guess its just me.

Now that I think on it. With that amount of space maybe I will go with the 15's. I am looking at my measurements and the recommended 3-5 cubes for the BTL 15 and wondering how many cubes and tuning I should use for the enclosure. I want to leave enough space to have a small rack for the amplifier. The maximum measurements I have is without having to build a wall. Plans are to upward fire the woofers.

Thanks for the input. I do want to make sure the BTL's get atleast their RMS. I see 2000 RMS in the manual.

I already have the amplifier. Im sure the 4000 watts at 1 ohm will do well.

I have maximum measurements. Top depth: 17" Bottom Depth: 23" Width: 42" Height: 26". I will be using the maximum 3 cubes for each woofer tuned to about 34 hertz. Alternator, batteries, and wiring used will be stinger. Amplifier being used will be pioneer premier PRS-D2000SPL.

I have plenty of space. My ranger is a supercab. Its just that a lot of people where I am dont go that big. They say im crazy for putting all that into that amount of space. I actually have plenty of space but no one I know goes that big around here.

I dont currently have an enclosure. I am planning on getting the enclosure from fisher customs.

I am currently beginning an installation for my 2002 Ranger super cab. I will be running two BTL 12's in this install. I would like some opinions on this setup. Some people may think im crazy for putting this into a small space. But I live by the rule get loud or go home. Let me know what you all think about how this will turn out and how hard it will be hitting.

I have the layout planned for the subs upward firing. The layout for the amp rack and secondary battery are planned out also. It will be great to hear it all done but money is tight so it will take some time. That doesnt mean that I will be going cheap with any of it. It will all be high quality. Thanks to everyone here for ideas and input. I greatly appreciate it. I take it all in as I continue on this project. It all helps make better ideas and also helps make things easier. Thanks also to fisher for running a great forum here.

I only paid $530 for the amplifier anyway. I bought it from sonicelectronix. Still planning on getting the premiere 4 channel for the rest of the speakers. A h.o. alternator and extra battery are planned. I have pretty much planned out the products I will be using. I have also got a bit of my hushmat just needs to be installed.