chico305

lol thanks, I was wondering

Anyone selling 1 10"?

just trying to see if anyone has one to sell. if not ill buy it directly from the website scott?

Need 1 Fi Q 10

good condition or new

scott?

HI, Here is my first post ! I was wondering what is the best SPL 10" Subwoofer I can get for this sealed enclosure. For only 1 10" I will be using an Mtx 7804 Mono Amplifier prob around 400-1000rms A list of sub RL-i10, 10w6, Re Se-10, Alpine type R 10" , Ground Zero 10" CZUW10 , JBL P1024, KICKER S10L7 Specs of Enclosure Mounting depth - 6 3/16 in. (based on 6" magnet) Mounting diameter - 9 1/8 in. Total volume - .7 cu. ft. Chambers - 1 (mono) Width - 37 1/2 in. Height - 12 1/8 in. Bottom depth - 10 1/8 in. Top Depth - 5 in. Construction - American MDF MDF thickness - 3/4 in. Weight - 22 lbs. 1 oz. Finish - Carpet Quality - High (automotive) Color - Charcoal Sealant - Heavy duty silicone Terminals - One (standard) It has to be this enclosure Thanks!!!!!!!!!!!!

http://www.soundsplinter.com/rli10_s...formation.html https://ssl.perfora.net/www.ficaraud...iew.shopscript http://reaudio.com/specs.html#sp_se FIGHT!

anyone knows someone selling a FI SSD 10

keep those replies coming !

Wat's up!!!

cool, then its b/w Fi SSD or Rli10 How much for your rli 10?

I see , Fi SSD looks like it could take more beating then the Rl last question what about an 08 L7 10" Kicker? http://cgi.ebay.com/KICKER-08-S10L7-CAR-10...93%3A1|294%3A50 Looks like it would also work in a small sealed enclosure

More SPL then SQ in small Sealed enclosure .7cF These were like the only good options I found

thanks, you think it would produce better then the others? I saw a FI SSD10 Fs: 28.3 Hz | 27.6 Hz Re: 0.75 Ohms/coil | 1.5 Ohms/coil Qms: 4.17 | 4.27 Qes: .48 | .44 Qts: .43 | .40 Mms: 166g | 175g Cms: 0.19mm/N | 0.19mm/N Sd: 310cm^2 | 310cm^2 Vas: 25.6 l | 25.6 l Spl: 82.7dB 1W/1m | 82.7dB 1W/1m Bl: 9.3 N/A | 14.1 N/A Xmax: 21mm Rms: 800W Sealed box: .2-.6 cuft Ported box: .9-1.5 cuft @ 33Hz Sub OD: 11.000” Cut ID: 9.250” Mounting depth: 6.000” Displacement: 0.12cuft

help...

Like this

yes , the highest output I could go with this enclosure

lol! no its a coupe but I want to keep trunk space

its a custom build enclosure for my trunk , I know that's not a good idea

Pretty much, more like 60% Spl and 40% SQ