LazyFcuk

Guess or are you sure lmao

I am going to build my box for the sub before it arrives but not complete it fully until I have made sure it fits etc. Now I need some help with the dimensions. I have this plan who someone sent to me and I am wondering if it should work pretty good. Base is 24depthx24heightx36width port is 5" wide and 27.25" long 22.5" height. Is this correct with 8cu ft box and 1.77 cu ft port? so 8cuft tuned to 32hz? any input? anything will be gladly appreciated.

in the calc it comes to 30.5 port length tuned to 30.8hz

wait why is the length for the port only 4? i thought he said 27.25??? what

There is the plans, suggestions for bracing and does it need to be bigger then?

any suggestions for bracing?

My 18 Bl in ported box. it is in an SUV so should i have the sub facing the roof with the port facing the back?

are you sure? because it was made by Scott of fi who gave it to a buyer who graciously sent it to me.

Do my dimensions sound right, looking for a couple more answer before I begin my build. Thanks

im going to run the port face the rear and the sub facing the roof. How could i support it?

Also this is kind of off topic but I am planning on getting a cheap alpine deck. will this affect my sub output or quality? Alpine MP3 CD Car Deck (CDE-9872) with 1500d sundown amp

Whats the difference? Also for a mono block amp i should buy a dual 2 ohm fi?

Has anyone done this that could give me some advice? Any explorer within a couple years would be the same.

wow plans are expensive in the states. I got my htc touch pro for free, $5 a month for unlimited text, $15 unlimited internet and $7.50 fo unlimited incoming calls plus 500 anytime. with taxes and all comes to 32 a month

ok ive got big 3 down on lock jsut a couple quick questions: 1. I hook up my amp to the second battery in the back correct? 2. On big 3 I use all 1/0 gauge wire, with a 115 fuse between alt and bat post. Alt is 95a.

no i know how to do it and what it does i just need help locating some of the wire attachment places. Mainly the engine block

thanks Ive decided on the bl now im looking for advice on big 3 which ive been looking at my alt/bat today and I cant see to find everything because the alt is very low.

thanks for the help so i am going to run and extra battery also big 3 or will that make a difference?

ok so new battery, but this wont cause my alt to over work and break down?

i might upgrade the battery later but the sub being 1000rms and they recommend upgrade electrical at 1000 I should be ok right?

OK so just connect 0g wire from stock to new in the back. My alt should be ok though my system wont be on all of the time to save power

ok so would i take out my stock or would i keep stock and wire the new battery along with the stock and alt.

A large group 31 battery would do you fine, look into Deka, Powermaster, Kinetik, Odyssey, Stinger for batteries. The cheapest is going to be the Deka for ~$200 shipped. So 2 of those or just replace my current with one of those?

how exactly would i do that? Also what am i looking at as far as cost.

2000 explorer 95a alt 1500d sundown Goals: earth rumbling bass so dual 2 ohm wired to 1 ohm at 1500x?