superpuck13

alright thnks for the help

so i posted this question in the other forum aswell didnt know witch to put this but i was anting help on these 2 fusion amps i have and was wondern if they are good enough to power 2 15" bls fully loaded here are the specs: Product Specifications 465 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N 750 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N 1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+N Linked Power Ratings @14.4VDC 1000 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N 1800 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N Max Power Rating: 2000 Watts Max Current: 100A Full Rated Power Distortion (Max) 1kHz: 0.45% THD @ Rated Power 1kHz/100Hz: 0.3% Frequency Response Hz (-3dB): 10Hz - 250Hz Signal to Noise: >90 Variable Low Pass Filter: 12 dB/Octave Bass Boost @ 45Hz: 12dB Input Sensitivity: 0.2 - 8V Input Impedance: 47K Fuse Rating: 25A x 4

i already have the big 3 done with o/1 and have 2 red tops but i was told i should get a btter alt so i was thinking ohio generator

it s a good safety measure but u deffinetly do not need it it would be kinda waste

yah i deff would run them to each sub would i have to get a h/o alt or anything upgrade wiring and battery?

alright and i woldnt be hooking these two amps 2gether so i dnt think i have to worryabout losing the out put power that way. im just hoping these amps will be good to help pump out a high number

can anyone tell me if this amp is good or not or has anyone elt with fusion ams before here are the specs Product Specifications 465 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N 750 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N 1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+N Linked Power Ratings @14.4VDC 1000 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N 1800 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N Max Power Rating: 2000 Watts Max Current: 100A Full Rated Power Distortion (Max) 1kHz: 0.45% THD @ Rated Power 1kHz/100Hz: 0.3% Frequency Response Hz (-3dB): 10Hz - 250Hz Signal to Noise: >90 Variable Low Pass Filter: 12 dB/Octave Bass Boost @ 45Hz: 12dB Input Sensitivity: 0.2 - 8V Input Impedance: 47K Fuse Rating: 25A x 4

box looks good

i was told that they do but am not sure i havent really herd of fusion amps before and cant find any reviews ave you delt with any or herd anything good about them?

Hey guys i have these 2 fusion powerplant mono block d amps that are 2000 watts. i was wondering if these amps are good enough and will suply ample amount of power to 2 15" bl's fully loaded? here are the specs. thanks again for all the help! Product Specifications 465 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N 750 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N 1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+N Linked Power Ratings @14.4VDC 1000 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N 1800 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N Max Power Rating: 2000 Watts Max Current: 100A Full Rated Power Distortion (Max) 1kHz: 0.45% THD @ Rated Power 1kHz/100Hz: 0.3% Frequency Response Hz (-3dB): 10Hz - 250Hz Signal to Noise: >90 Variable Low Pass Filter: 12 dB/Octave Bass Boost @ 45Hz: 12dB Input Sensitivity: 0.2 - 8V Input Impedance: 47K Fuse Rating: 25A x 4

alright thanks for all the help

so the bl's arnt hitting any lows or just not with force?

where is the date that says it was picked up?

like 3 days i would have figured that they would have ben shipped on monday but they wernt s i have no clue

about a week and a bit since i have recieved it

ahhahhahaha nice man

yah man that sounds the best my buddy has 2 18 bls in ported box with the port to the back and the subs to the roof sounds great

you have no idea how excited iam lmao like a little kid at x - mas. these bad boys are going in the back seat of a cavalier with a 9.11 cuft box tuned to 32hz should be rediculous. thats if i get them ahahaaa

it has been3 days since i have placed my order

actualy i have the exact same prob alls i have recieved is the confirmation :S must be swamped or sumthing but still am a little worried lol