treylittlefield

heck yeah lol i didint know anything about it till my dad was standin outside and saw stuff coming out where dust was on the outside of the box. lol

I currenty have thhe two subs in a 4th order blowthrough off of a 4500d on 16 volts. Gains were set around 1/2 way and it pounded for bout 4 days. Then I decided to turn it up a little. Between 1/2 and 3/4. Now the subs don't seem near as loud to me..could it be I'm just gettinng used to them? I'm gonna check with the dmm tomorrow and read the coils and see how many watts the amp is putting out...I hope I didn't mess anything up:(

i figured it out nick. the brace in the middle of the box was loose and letting air through the hole. thats what was makin the noise. tightened it up and threw some silicone on it

i do realize that. lol but i wanted more power...i mainly wanna know if i have messed the speakers up or is it jsut me getting used to them...if both coils read fine does that mean nothing is wrong with the speaker? Pretty much for the most part..if you burned things up by clipping them the leads will create more resistance and it will eventually break. Hard to tell if you are just going deaf or if you broke something. When the subs quit working that means you broke them i honestly dont think im clipping that amp. lol but i mean they still play and what not. idk just sounds a little different. maybe its my truck fallin apart? lol my rearview has already fell off...lol so if i check the coils in ohms they should read around 1 ohm (dual 1 ohm vc) give or take...hopefully im not goin deaf. but id rather be goin deaf than it be the speakers..lol also do yal have any stronger recones? just out of curiousity..maybe more or stiffer spiders? No point in doing that.. If you are running into that it is because you are running way too much power and playing below tuning and wearing the spiders out They are how they are for a reason..we can stack more on a recone if you want, but isn't going to sound optimal by any means. ah gotcha...hmmm...tryin to figure out a way to fit more subs in the bed of an s10...lol whats the size difference between a regular ported box and 4th order? they are currently in the 4th order

i honestly think what it is is the back wall flexin way more and makin more nosie...i have the flap that lets air in and out of the cabin when u close the door. (single cab s10) and i think its the stupid thing flappin....but i will fix it soon enough to stop it..the speakers themselves just sound a little different...i'm just very cautious when crap starts soundin different...dont wanna damage anything

i do realize that. lol but i wanted more power...i mainly wanna know if i have messed the speakers up or is it jsut me getting used to them...if both coils read fine does that mean nothing is wrong with the speaker? Pretty much for the most part..if you burned things up by clipping them the leads will create more resistance and it will eventually break. Hard to tell if you are just going deaf or if you broke something. When the subs quit working that means you broke them i honestly dont think im clipping that amp. lol but i mean they still play and what not. idk just sounds a little different. maybe its my truck fallin apart? lol my rearview has already fell off...lol so if i check the coils in ohms they should read around 1 ohm (dual 1 ohm vc) give or take...hopefully im not goin deaf. but id rather be goin deaf than it be the speakers..lol also do yal have any stronger recones? just out of curiousity..maybe more or stiffer spiders?

i do realize that. lol but i wanted more power...i mainly wanna know if i have messed the speakers up or is it jsut me getting used to them...if both coils read fine does that mean nothing is wrong with the speaker?

yes the speakers are made by fi...therefore the reason im posting here..this has nothing to do with the amp. i was wondering if something is wrong with the speakers. a Sundown 4500d on 16volts....triple alts...one for 12v system. 2 for the subs and nothing else. no stepdowns or nothing. 2/0 welding wire to amp and 4/0 from alts to batts. 3 xs d1600's

i am going to read the amp for watts...im going to read the coils on the speakers to make sure i didnt blow them.

does anyone know when the comps will come out?? they look awesome...and anyone know where i can find a 40.1 for trade?

What the minimum and maximum voltage u could run...say a 100.4...or 4500d...what would be the safest for a 16volt system for a 4500d?

I coould have swore jacob told me the 4500 could take 19.2...so I guess I need to set my alternators at 18.5 then..then voltage drop will take it down a little more

I coould have swore jacob told me the 4500 could take 19.2...so I guess I need to set my alternators at 18.5 then..then voltage drop will take it down a little more

I have one and its awesome

not saying they wont.....i had mine hooked to a 600watt amp and somethin is wrong with my speaker now

hey guys i have a single cab s10..i plan on running a single 10 between the seats inverted. i have came up wit 2.42cft...would 2 4in aero ports be big enough?? the guy i am buying it from said with that little of power i can build a 2.0cft box and gain a lot i plan on porting it out the side...would 3 in from the wall be enough room for the port?? my back wall is 52in. and my box is 49x13x6.5x10...also i am goin to use 1/2 MDF..any suggestions??

someone has some kind of input i'm sure...lol

anyone??

reasoning asking about the ohms...the 125.2 puts out 200x2 at 2 ohms...the 100.4 puts out 100x4 at 4 ohms...so i was asking whch one was stronger...lol now that i look at they are practically the same i guess

i was wondering...i have 2 sets of components...and was planning on giving them 150watts each..600watts in all for all 4. I figured i could bridge each channel and run 2 comps off of the bridged channel. but the amp is rated for 320w at 4 ohms not 2 ohms which is what they would be running...i dont guess this would work would it??

how underrated are these amps? and i have went to their website..i figured you guys would tell me a lot easier than me tryin to figure it out. lol

noone??

thanks guys..thats what i was thinkin i just wanted to make sure..so i guess i can just run each component on each channel and hope its loud enough...lol which brings me to my next question..does the 100.4 put out more at 4ohms like i am talking about..or does the 125.2 put out more at 2 ohms...also whick one has more flexibility...etc..

o ok thanks

will we get a tracking number or anything??