Jay-C76

LOL....just a few.....LOL

Sweet, I can't wait!

Super WoW! LOL Dang it start a build log. I'd love to see a thousand pics of this!

O.k......Making the video today.... It's sunny, hot and humid as hell outside but, you guys have to see these back in action. The hood has made a WORLD of difference in the output into the cab. I tried the pop can trick but my windows aren't shaped right for it so I had to start off holding it there before the bass hit. It kinda stuck there until the note stopped so, not really worth much a video on that. I just have to go find a place to shot it at...People are quick to call the cops around this town if their "peace" is disturbed. So it's out to the back roads, a.k.a. Farm Country...LOL

DAMN........WoW..........I'm speechless..... This is going to be interesting!

Mechman does not give you a read out sheet anymore... I just got mine a month ago and they explained to me that he got thousands of phone calls from confused customers so he doesn't give out the sheets anymore. Plus there is a formula that has to be figured due to different size pulleys that are on the other parts of your motor that have to be factored in the equation. Once the figures are correct you get you're accurate measurements. However, all of their alts are guaranteed to produce their rated amperage. Mine is solid and holds it's voltage within .2 volts even when system is at max. Way better than my old P.O.S. Iraggi alt I had last year that burned up in less than two months.

Damn, Now I want a re cone!!! Those are sexy!!!

I've never done it but I know a few who have and they say it's not really hard to do, you just have to be careful and watch what you're doing. Good luck on it man and take pics if you can!

Is this considered a wall or half wall? I'm trying to understand the classes and rules for DB Drag and Bass Race. Plus I've read that if the system is over 140db you must be outside the vehicle.... I lost my remote for the H/U so is this an issue? Would it be wise to wire up a long harness to control volume & playback during the comp? This being my first comp, I'm really confused about the rules. Can anyone answer any of these questions? I would appreciate it very much if some of the veterans could point my in the right directions.. Please help!!!

Welcome to the Forum!

I missed ya by an hour or so last year I think..... I can't wait to meet y'all in person and see your installs too! If we all park together it'll be cool like a family gathering! LOL

Packin' it in there!

Adam, Here's your old link bro : My First Box built for 12" RE Audio SX - SSA Car Audio Forum It was 17 pages back!! LOL

LMAO!! That's great! Nice vidz Mike!

Oh no...You have to be blindfolded to get near my truck......LOL Jokining, I'll see ya there!

O.K. Here's the scoop. GLUE When the adapter harness was made, the plastic socket/plug had to be glued to hold the wires securely in the harness. Well.........Glue leaked down two of the three pins inside the harness. Completely glazing the whole both pins. Here's how I found it out: Turn the ignition on but DO NOT start the engine. Test the Yellow wire on the end of the plug and put the black probe/clamp on a good ground. This should now read the same as at the battery. (Problem ~ I had no reading at all) Next, repeat the process with the Green wire. This should also read the same as the battery but may be a couple tenths lower. (Problem ~ I had nothing here as well) When I did this test on the stock plug/harness, I had good readings..... Inspected the harness and notices the glue on the pins. Removed the glue with a small machining file. (tiny,fine tooth file) After all that, It's alive!!!! 14.2 volts all the way to the rear.... When the Icons are hurling it only loses .2 volts when it really digs deep. No video yet, I need to do a bit of cleaning up and inspecting everything to make sure there are no cracks in the hood from the pressure. But I do have some new pics.... New inline fuse bracket, 10Ga. 316L Stainless Steel. New battery top bracket, same material as above. The foam on the top is being replaced by black Armaflex foam. Me putting the alt in the first time...8 hours at work the came home for 4 hours on the install. Day two. Put the alt back in after cleaning the plug. Finally got some help the past couple days from my bud James. He's putting the new bracket on the battery and checking cables. Amp rack with fan on the T1500-1bd. Plus install process pics...... Dropping in the Icon D1 15's I'll get a video up real soon I promise y'all !!!! This set up is way more intense than the last I had !!!

UPDATE!!!! OMFG!!!!! It's alive !!!!!! WoW This is insane!!! Pics later..............(and explanation as to the voltage issue)

Well I spoke to the guy at Mechman.... I have a little list of things to check. Pulley that comes on it is recommended to stay..( No switching) Double check resting voltage of secondary battery.... Then DMM the Green and Yellow wire on the adapter that plugs into the alt to see if it's getting power. (to make sure the alt is turning on & the batteries aren't the only thing running engine) Double check ground cabling...(I did but I'll do it again for sh**'s and giggles) If all else fails, it'll have to make a trip back to them to see what's up with it. He re assured me that all of them get tested to at least put out advertised amperage before they get shipped. That being said, If I can't find out what's up then I guess UPS beat the snot out of it during shipping....... Any two ways about it, I feel like slamming my head in the hood!!! LOL (not really, I'm just tired of having alternator issues when the stock one works like a dream, just not enough amps.) Let's go probing with a meter!!!!! Yeah!!!!! ~~~~~~

Voltage issues!!! Stock alt puts out 14.3 volts at idle. New Mechman only puts out 12.1 and makes engine run rough......WTF??????

Woofer porn!!!!

Thanks guys! I racked my brain on this one for what seemed like forever..LOL It better not sound like azz...

I don't know what's going to happen with this..LOL I have some theories but I can't say for sure until I actually make it come alive!!!

Man, I was really thinking hard about it to tell you the truth. I'm curious to see exactly how much it actually flexes before I take on the foam monster. LOL (Me and foam don't get along)

You're in Michigan, it'd only take a couple days if they were ordered. The place is in Springboro, Ohio. But if you can't wait, it a pinch you could try stainless bolts with a hole drilled through one end.