goodguy8705
New Members-
Content Count
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by goodguy8705
-
I don't compete and would like a SQ/LOUD SOUND QUALITY setup and am having the hardest time designing a box to use. Obviously Fi recommends a sealed enclosure and that's what I was going to do originally until I started playing around in WinISD. Now I'm completely unsure so I figured I'd ask you guys. How do you guys think a 12" Fi Q would sound in a 2.3 cu ft enclosure tuned to 24-25hz as opposed to a 1.3 cu ft sealed enclosure? I can't upload the WinISD output on my current connection but I will after midnight when I get home.
-
I'm putting a 225 amp alternator into my car and I'm using 0 gauge for my big 3 upgrade. Bigger is always better especially if you ever plan to change your system at a later date. For you, I would recommend 2 gauge for the big 3 but it's up to you. I don't know anything about your stock alternator. Ground should always be the the same size or bigger than the power wire.
-
My stock alternator maxes at 105 amps so 1500w rms would severely strain my electrical system. Upgrading the big 3 only helps if the wiring is limiting what your alternator can put out.
-
What is your alternator rated at?
-
Here is a quote from an owner who ran some tests: Here is a quote from the owner of AudioQue about the 5% rating: Here is another quote from a different owner: Source As far as performance for the money, I still recommend the AudioQue.
-
I think what he's saying is that a lot of amps use the same internal components as other amps yet they have completely different reputations, not because they are different, but because people are stupid.
-
The electrical system in my car rarely fluctuates below 14.4v so this really isn't a problem for me. I sometimes forget people don't upgrade their electrical system.
-
Audioque amps are solid and for the price, they are damn hard to beat unless you go used. It's a lot better than resorting to a Hifonics, at least in my opinion.
-
If you plan on running the sub at 1 ohm, I recommend looking into the Audioque 1200D. It's a good SQ oriented amp and will push the sub at it's rated power handling. It's also a pretty small profile amp. Check it out.