bassahaulic

Why is everyone saying so much port area? Good lord.

How cheap?

Cause I want to? Why can't you use proper capitalization?

Well, we decided to only do 3 RD 6.5"s and 3 RD tweeters per door. Seeing as the 4th 6.5" would have been facing the seat and I wouldn't hear it anyway I was ok with it. Only got a few pics tonight, I'll make sure to get more tomorrow. But it's a start. The color I picked, I think I got close.

I like it, my buddy has the slightly newer 4-door version. We did a nice system in there. But this is just sick.

You can wire those Type R's in parallel down to 1ohm, the amp would put out 1,200+ rms. Each woofer would then be seeing around 600rms. When you order your next woofer, order a D2 so you can run the amp at 1ohm.

It's sexy. lol What size did you have it?

I think you would be fine, just watch the voltage.

7 cubes each :-O

1680x1050 22"s of pure goodness

More details. lol

Don't buy that junk, I can pretty much promise it's barely held together and tuned to like 45Hz. And probably 1/2" MDF. What do you need to build your own? A design?

I got everything I need to do the doors, should be starting tomorrow. A little more delayed then I thought but it's all ganna be worth it.

Are the tweeters on an amp?

The electrical is completely dependent on how much power you run form your amp/amps, not on the woofer you have. I support the 2 12"s idea, would do much better then trying to squeeze that 18" into 4cubes. And get the capacitor idea out of your head now. Lol

Me too

I am almost positive that i didn't connect it to the constant, it wouldn't make sense.. i connected the wires about roughly a week ago and last night is the first time this happened, if i connected it to the constant wouldn't the amp be on alllllll the time. But i am unscrewing everything as i type, we will see. Try taking the "remote"' wire out the amp. That will answer ALL questions. What results should i get? Amp should turn off since it has no signal.....

I am almost positive that i didn't connect it to the constant, it wouldn't make sense.. i connected the wires about roughly a week ago and last night is the first time this happened, if i connected it to the constant wouldn't the amp be on alllllll the time. But i am unscrewing everything as i type, we will see. Try taking the "remote"' wire out the amp. That will answer ALL questions.

I am a AMD Sempron. lol I got my whole computer, except the monitor, for free. I paid $100 for the 22" monitor. lol Included 22" Monitor Custom built CPU Logitech G15 Keyboard Logitech Mouse Pics soon as I get home.

I figured as much. I'll just use radio for tweets for temp.

I bought all of Johnathan Prices' old component sets for a real good price, a few of the crossovers were….. well shitty and unusable. But I am MORE than ok with that. My question is, could I run 2 mids & 2 tweets off one crossover? I wired up a 2 mids & 2 tweets to a crossover to check the ohm load at the “input” space and it was at 3.44ohm. If not then I’ll just run the tweets off radio and mids off 100.4 till I find a cheap 50.4.

Ah, brilliant. Good reminder. I thought about the the second I read what wa happening. Yes the 9886 has both antenna REM and amplifier REM. Make sure you have all amps wired to the blue/whie white, not solid blue.

Well, I finally killed my MT that has had a bad coil for months. So this weekend coming up will consist of order two new recones, one for each woofer. And fiber glassing the doors with all the speakers. I will keep my brother around to shot vids and take pictures off all the work we do, seeing as I take 2-3 at the start then forget to untill it's all done.

This is ganna be epic lol I WANT........ no I NEED vids....

Well I'll be dipped in shit and rolled in bread crumbs........ someone will know where that's from. You is correct.