04BlueSRT

Just saying hello and great to be on an all audio board. Ed

Cool, I'll try that when I get home from work. If you thinkmy size will work, I'll probably stick with that. I'll mess with the link you gave me and see what it comes up with. Thanks, Ed

This is for 2-10" Alpine Type-R subs (SWR-1022D), and will be powered by an Alpine MRD-M501 amplifier rated at 550W into 2 ohm mono. These are my inside dimensions: Height 10" Depth 10" Width 15.25" Total is .88 ft^3/sub Total outside box dimensions are: 11"x11"x32" I need to put this box underneath a rear strut bar and from the bottom of the bar to the trunk floor is 11 1/2". Will this work or should I scrap the strut bar and build a taller box? Any help or suggestions are appreciated. Ed

Yes, 15.25" is per sub total width would be 32" using 3/4" MDF. I was just kind of worried about the height of the box compared to the 10" sub. Ed

Thanks for the link. Hopefully I can get some advice on building my box to fit the trunk of my SRT-4 without having to take out my rear strut bar too. Ed