Julian

direct lead would be the cheapest and easiest fix IMO

THey offer it, you just have to pay for it.. it was ~1$ last time i shipped something.

USPS does not include a tracking number UNLESS you purchase one. Especially if its flat rate.

My friend did a little progress for me, the port will but not be up and down, It will look similar to our vans wall, we will get around 350 Sq in of port and we're aiming for a tuning of 35-37hz.

No subs, so I run em low I'm going to cross them at 100-150hz when I have subs

How expensive? I spent less than $700 INSTALLED on Slam Bags for trucks on my 4banger... My bags are rated for 2500lbs per bag, 400PSI filled, 750PSI surge. I spent exactly $650 installed, parts were less than $400. Currently I have about 800lbs in the vehicle, about 500 more lbs to go before i'm done. These bags are just laughing at the weight... In my car, i have about 140PSI filled right now holding 800lbs in the rear. Rear height is bout 2" below stock height but definitely safe. These aren't bags per say, they are shocks with adjustable bags on them, I paid 940 shipped for mine. This was the only option out there for me that would basically drop in. I will have a full air ride sometime after sema when ride tech comes out wth the full kit. I am able to inflate my shocks with a normal tire pumps, which makes everything easy I actually have around 20-30 lbs in them and they are sitting exactly where the stock was sitting (maybe lower), I can completely raise them where it looks like no weight is on them at all http://www.ridetech....ore/shockwaves/

need one in good condition

this is what I did for my mustang and it did wonders, I can adjust it with the optional sharder kit with, will do up to 80-150 psi and a max of 1200lbs EACH per shockwave.. expensive as FUCK but got the job done well.

Fuck, nothing is going on at work..

email them either way you will be happy. copper will be stupid expensive.

nope could not work this weekend, will work next week should be done before the 15th

I think I said somewhere up there about an externally regulated alternator oh wait I did... Hopefully that'll fix your issues, I had the exact same issues with my MM alt and my new 2011 mustang. I had to externally regulate it.. now It's all good

Yes, you can bypass it by tapping into the stock witring harness.. but why take a short cut on a new truck like that? For my mustang i had to pay 350 for my dash kit and 100$ for the harness alone. I would just fork up the money for the harness and do it the right way.

for 1-2225w I would suggest 6-7 cubes, for more than RMS I would suggest 5-6 cubes before displacement. Make sure you set your SSF appropriately, if not it will lead to softpart suicide.

That inserted layer of PVB is what allows the glass to absorb energy during an impact and gives the glass resistance to penetration from flying projectiles. It also deflects up to 95 percent of ultraviolet (UV) rays from the sun [source: Reuters]. Laminated glass can break and be punctured, but it will stay intact because of its chemical bond with the PVB. Laminated windshields also provide strength to a car's roof. Windshields keep the roof from buckling and crashing down on passengers completely during a rollover. Without the rigidity and strength of laminated glass windshields, many roofs would pose greater risks to passengers in certain kinds of accidents.

http://dailycurrant.com/2012/08/30/bill-nye-blasts-todd-akin-challenges-debate/ I fucking love Bill Nye, "So Todd I got an offer for you. You and me. Any time. Any place. Debating science mano- a-mano. I'll bring the facts, and you bring the Vaseline. Because your ass is gonna fucking need it when I'm done whipping.

Item(s) for Sale: American Bass 1000.1 Item(s) Description/Condition: fully functioning 10/10 function 7.5/10 cosmetic, some light scratches, It has a black plexi bottom. Price: Looking for two single larger amps such as BC5500s's, an American Bass 1100.1, Ns1's DC5k's, etc cash wise I'd look for aroun 1400+ half shipping cont us. Shipping and Miscellaneous Item Information: Item Pictures: (List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Size, thin and tall vs wide and short.

I can drink most (good) liquors straight without issue and think nothing of it. Hand me some sweet drink and I will seriously puke from it. Sweet drinks remind me of cough syrup, Overly sweet with an alcohol taste to it.

Cable should always be supported and not allowed to move around in the terminal. If you do this it is very likely that the wire will not come out.

Use amazing goop, that is your best bet.

something is up with photobucket. i dunno