Julian

I ordered some, the above is true but what they leave out is that some parts of the foil lack the butyl parts. So you may get half a sheet that's usable. In maybe 1~10 3 or 4 were like that

Kevin is a douche equipment is nothing special. If you get it cheap I'd run it. But if you pay retail I wouldn't

Kevin is a douche equipment is nothing special. If you get it cheap I'd run it. But if you pay retail I wouldn't

Usually in the f series trucks the best way to get around depth issues is a bump out so the magnet will clear. We used a lot of s series from alpine with great results sealed in these trucks.you can also add some washers and longer bolts to get a bit more depth

I don't think you buy a Nissan GTR and ask the dealer how do you put it in 2nd? All Julian was insinuating is that maybe he should have done a little bit more research before making such a big purchase. And having such an "large" equipment list. That was my point exactly, if you need to ask some serious basic questions without doing at least the bare minimum of research you probably shouldn't be doing it. We aren't here to spoon feed you information. And to say to come back when I've ran as big of equipment at that is laughable. I've been in this hobby for nearly 9 years with multiple large setups.. 8 xcon 10s on 15k, 12 12s on 20 k.. etc If you can't do some basic calculations or even plug them into a calculator you shouldn't be delving this deep into a hobby where a miss calculation can ruin thousands of dollars worth of equipment. So yeah. Lul

If you're asking some super basic questions then you probably shouldn't

And I would also suggest a larger box

Ported tuned in the high 30s is probably what you need. And honestly subs shouldn't be playing up to 70. I would upgrade my front stage before making a definite answer

Most amps won't do it daily. My 9s Would play at .25 but required me to play above 50hz or they'd protect instantly

Recone?

A cigarette lighter would be cool so you could charge your phone/etc.

Or you know how some car tire pumps come with integrated flashlights. You could do something like that. Or emergency lights etc some high powered LEDS.

Do they react any different than a Korean class d?

A small 120 mm fan would be great

How did you like these

so that means depending on the frequency the impedance changes. If they are d2 they are d2 not 1.4

There is a difference between dc and ac resistance. Impedance is rated over a usable frequency range.

Location is probably your issue.

Get in contact with Duran on here. He could build you something possibly

Yeah have you looked into MWSPL? Probably one of the best orgs out there imo. Tons of great guys and the owner is a real cool guy too

http://www.cableyard.com/RADAFLEX-40-AWG-Black-Welding-Cable_p_15.html or even a local welding shop

Looks like an X/Q Possibly

Also the fact that most of those are Korean made which blurs the lines even more.

Honestly I'd just save your safe a headache and use an aero.

Aren't Canadians always supposed to apologize?