Julian

I am looking for a box design for 3 audioque HDC3 10's my trunk specs H 16 in L 43 in W 36 in the mouth of my trunk is 44in looking for a 4.5 cuft box tuned to 36/37 hertz i don't know how much port area though,

Low voltage = higher amperage draw = kaboom, smoke, maybe fire.

oh 43 inches its slanted like so /

what do you mean by deep?

oh i didnt understand at first from bar-bar there is 38in of space between them and when the trunk lid is closed from the bottom of the bar there is 6 inches from the bottom of the floor

from the wheel well to the seat there is little to no space maybe 3 inches 47 inch after the wheel well and the box was to be built inbetween the two arms

you could get two 200 amp CB and wire them together like you would two fuses.

great job

amazing on the subject of africa

that would be great i want to do something like that but i wasnt quite sure

how did you mount your amps vertaclly like that? picture would be cool

the foam will help a lot also when i turned my box 360 degrees and made the woofers face towards the front of my car the rattled stopped a lot and didnt rattle as much.

you could maybe, spread the silicone glue out so you dont see a bead.

Personally, i've never liked endcaps; at all. i think they're obnoxious to take off and put back on if you're adjusting things. any amp that has come with endcaps; they have ended up with the endcaps in my trash or floating around my house.

heres some picture diagrams 12volt ftw

this is what Mike from Power Bastards said Is the output rating cold or hot?HotWhat is the idle output?110A+What is the idle rpm rating at idle output?We consider idle to be 650RPMHow is the cooling system at peak output?Great How long can is sustain maximum output?Depends on the vehicle (alternator mounted next to header?)What is the maximum alt rpms it can receive before failure?More than your engine can spinWhat is the maximum output rpm rated at?1200RPMWhat is the voltage regulator set at if internally regulated?14.6vIs it direct bolt on or is modification required?Direct bolt onWill it effect or is it controlled by the car's computer?Controlled exactly as the stock alternatorDo i need an overdrive pulley for proper idle output?Monthly special going on right now, free overdrive pulley already pre-installed on all alternators. i dont know quite what this means and actually i was looking at the wrong one 289 w/o shipping

yeah they all want 599+ i think im just going to go with Exsessive amperage

Shizz you the best. thanks. i'll send them a email and see what they say. thanks. thanks to you mac.

I never said that cheaper was better. Sometimes that is the case. i'm merely looking at my options, geting feedback about other companies.

as "same thing" i meant rating for amps. I will be contacting them tomorrow. it was a question has anyone dealt with them?

As always in life like Jay said, shortcuts end in short commings. Might as well buy a new amplifier.

I bought my Sundown Audio 3000d from Db-r took a bit to ship. when i recieved it, it smoked; his assistant soldered the power leads to short and they broke. i sent it back (poorly shipped i might add not knowing and being dumb). the RCA's got crunched in. he fixed it for free then shipped it back for free. A+++++++++++++++++++++++++++ workmanship and cheap. i wouldn't buy refurbs from anyone else, the customer service was great, got back to me good and he was always VERY patient with me even when i called most days to get an update.

Shizz=hero

im not really from Kansas but im in Missouri liberty Missouri to be exact! nice to have you here, there are a bunch of good people on here with great info! Julian

i've heard that gorilla glue is pretty tough stuff, haven't experienced it but thought i might throw that into the proverbial swimming pool of glues