Julian

That's what AQ recommendeds for the HDC3 18's

everything right except the tuning frequency! how can i get it to the 38 hz?

Yes double thick so it would be a thickness of 1.5inch

Someone willing to check my math? I came up with 13.92188 net with 195 inch of port tuned to 38hz im probably very wrong, I don't know yet

I think i have my final design ready. to make sure the port is not added into the enclosure? the width of the port is subtracted from it correct?

Thats what i thought

Basically to beat it daily and be able to compete with it

An oscilloscope would be the best thing to set your gains. You could talk to Jacob about getting different options on the Nighshades for them to handle more power.

Im interested in Turpan, if you'd divulge where you get it from? I don't want to mess around with MDF, hearing the horror stories. Thanks, Julian.

Touche, i'd rather be safe than see my amplifier overheat and smoke due to low voltage.

More AH never hurt anyone lol. I'm going to have ~3 Deka's for my Saz-3000d

http://www.soundsolutionsaudio.com/store/categories/Batteries-%26-Electrical/XS-Power/ right there!

No problem! I thought the Yellow tops were only rated at ~55AH? unless it's a larger sized battery. But for the most part i've only seen the yellow tops around here that are 55AH, look into some Deka Intimidator 9A31 (100 ah)for $187.81 or the XS Power batteries (D2700) 103AH for $299.00. Shizzzon explained to me that the Deka's have a lower float value than the Xs batteries.

I know right? They have a ton of good informational videos. I've learned a lot from them surprisingly. They water it down to a normal persons thought process without leaving out key information.

If i remember right, every ~1,000 watts an additional 70 amps is pulled. that should help!

thanks man! I'm hoping to start my wall soon its going to be sick

very painless, customer service grade A+++. They'll usually answer your questions in 1 day or less. I owned the BL and had it beating on my Saz-3000d @ 2 ohms getting +1.5kwrms daily.

I owned the BL and personally loved it. Every L7 i've heard sounds like utter shit. IMHO

I've always heard 6th order sound like poop for daily, and if not built to exact they sound crappy too lol.

i thought FI strongly recommendeds not to seal the btls

they're are a cd on Itunes called "tuner challenge" you get a nice set of tones/bass testers for only 10 dollars.

Thanks Jacob, I had a good feeling that they had been soldered on the bottom. I was just worried, Thank you.

The mosfets? that doesnt make any sense; please clarify.

Fourth order bandpass is going to be the best way to do it IMHO. what woofer are you planning on using with it?

bumpity