Julian

What's the impedance of the sub woofers

aren't these fi/re based?

Welcome Guys! Hope to see some stellar products!

I'm very biased also SAZ-3000d ftw

What part of Missouri are ya from?

fiberglassing http://www.zoklet.net/bbs/showthread.php?t=41790

Door pods, or go to a junkyard and buy a new door panel for your car.

make door pods simple

I guess it's going to be a "limited" line, so, so many will be sold and made. 10k on 16v very nice.

fresh!

Flip a coin, if it doesn't work out sell it and buy one other, all great sub choices.

It's called Port noise, Try a Kerfed enclosure it'll reduce or eliminate port noise

A lot of people on here are very nice and knowledgeable. It's just taking what they say, understanding it, and applying it. Some people come off as arsehos, but that's just how some people come off as, some of the MOST intelligent people on here can come off as a bit dickish. it's something not to take personally. Everything in car audio breaks down to Learning, Understanding, and application. That's how I've learned a lot of things. if you want people to answer your topics they need to be CONCISE , Understandable, and being able to communicate your needs and wants. Also, Not making multiple topics for the SAME thing if it doesn't get answered the first time or in a few hours review your thread and then correct it.

I read that

I agree with Impious, only deadening for enclosures i've seen was with kick pods and door panels.

Wow.....

i'd get the BL (Although i'd love a pair of XCONS) But from experience i loved my BL i would tune it about ~35hz, at 30hz the lows were there but the upper bass was lacking.

Not quite, but it will make the amps work a little easier at 2 ohms. Clipping will still depend on settings, and overheating will still be due to overdriving an amp. less current draw = less energy wasted on heat As apposed to being at .5ohm (which it will indefinitely clip unless you have a fairly good electrical behind it) it will clip less at 2 ohms than it would at .5

You either need to get a recone, from FI or RE. Also you can wire it to 2 ohms it will be getting less wattage but it means no clipping or overheating,

any reasoning behind this? AQ are good amps.. Just not the best IMHO I've heard older Comp sets of MB Quart VS new Maxxsonic Comps and the older sound just so much better.

Wire...

are you sure they're dual 2's and not 1's? if it were dual 1's it would drop it below 1ohm and make the amp run hottter, those hifonics amps don't like being put under 1 ohm with out a very good electrical.

i've seen it been done before

Heres my first build log, my setup is going to be two 12 inch DC Audio Level 4's with the Level 5 coils and dual 1. Sundown audio 3000d KnuKonceptz Wire 1/0 Rockford Fosgate Fuses Lightning Audio fuse blocks 2 Deka Intemidators 9a31 H/O Alt Santa AKA the UPS man brought me some goodies Coolest way of tightening wire to the fuse block two different screws one on the side and one on top RF 300 amp fuses Fuse Block 25 ft of power Ground 1/0 size 15 ft of 1/0 ground My Box: 4.38 cu foot made of 1 inch MDF 4.10 Net after displacement of sub woofers.