mrray13

sweet! you won't be disappointed!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

women have one major problem... it's not legal to kill them. otherwise, we have to lump the fact they have all the pussy, so they have all the power. you just have to man up and move on. of course, the next time you two have sex, stick in her ass without asking. that'll tell her who's boss wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

lol...that would do it john.. addicted, hell no! i'm lucky if i remember to check the damn place, lol. this is usually the only window open wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

this is the technique i've read about. measure a sealed enclosure (of roughly the same overall gross displacment of yoru spl box) outside the vehicle first. then place inside the vehicle in roughly the same location the spl box will go, and face. then measure again. but for the life of me, i can't remember what you do next, lol. it was stickied here once, but might have been lost in the upgrade... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

HBD man! have a safe and enjoyable day bro!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

maybe it runs faster, maybe not, but it wouldn't be as cool if it didn't drag ass!! that is pretty fuckin pimp!! nice find tom. i want on eof those please, lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

why is this bro-man? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

just so you know mr. smarter then me, (which you are, blah) my googles are yellow, not purple. thank you very much, and denim, that scoot is worthy of an rl-i8. even my wife made fun of the factory exhaust and the "sound" it made, hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

nope, no biker gut, lol. while it looks that way, that's just the shirt hanging down, getting a bit of wind. while i do have a bit of a gut, it's not quite that bad, but thanks for noticing anyway, lol. bastage and yeah, that thing was tiny. was way beyond glad to get back on mine! but i thought the pic was good for a few laughs, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

IME, the maws can indeed handle more then rated. 350 over rated might be pushing it. but as you mentioned, set your gains carefully, and i believe you'll be happy with the results. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

HBD mr Fi second or third on the chain, lol! have a safe one bro! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

they'll get lower for sure. louder maybe. and they'll work fine in door, jsut seal it up well, and you'll love those 8's. if the right offer is made, i might be tempted to pull my sq 6.5s out and sell them to ya, lol. i've got a pair of kicker ss 6.5s on my floor waiting to go in.... with a pair of rmb8 midbasses...hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee dont tempt me. I would do a 3-way with those msq6's and msync8 mids and sell the tweeters and crossovers from the msync set. lol, your tempted. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

they'll get lower for sure. louder maybe. and they'll work fine in door, jsut seal it up well, and you'll love those 8's. if the right offer is made, i might be tempted to pull my sq 6.5s out and sell them to ya, lol. i've got a pair of kicker ss 6.5s on my floor waiting to go in.... with a pair of rmb8 midbasses...hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

if ordering the replacement silk tweeter like jim suggested ( i prefer the silk one as well. the sq's in my truck rock), order the sq crossovers if staying passive. like mentioned before, you can biamp..... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

that's a MAN'S margarita mixer, lol. i want one! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

what flakko said! i think denim can probably hook you up with a nice package rl-i8/amp deal. othewise, that system sounds pretty pimp! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

35 to 50 wrms on the mid, a little less on the tweet if you go biamped. teh synq crossover doesn't allow for biamping, if you go passive. if you stay passive, snag a set of sq crossovers, tehy are biampable. knowing the squeers around here, they are going to tell you go active. if you do, i'd start with the tweeter around 2.5k on the bottom end adn the mid running from around 50-55hz up to the tweeter. it's a 1" metallic dome, so you can go lower if needed. as to using them as a coaxil or componet, depends upon vehicle. but i'm sure most will say mount that tweet up high, and forward. but you'll have to play around with location to get it right. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

TOP wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the wifey has wanted me to gtfo for over a month now. two weeks ago, i told scott i was looking for something stable after a payroll check bounced. i don't deposit the checks anymore. i cash them and then deposit the cash. it's that bad. sean, when you were down, things were a lot better. he wasn't divorced from his brains yet. but yeah, in the long run, it's better that i'm gone. i get a key to the woodshop, so that's pretty cool, lol. i turn my office keys in tomorrow. i'll go job hunting tomorrow, file for unemployment ( i would have been able to do that online, but because i worked in beloit, wi last year, i can't ) and mow the grass later in the afternoon. should be a ncie day. might get the oil changed in the truck, the change oil light is on. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

look into a small memphis belle. it's a 5 channel, and at 2 ohm on the sub side will give you 250-300wrms. and you will have an extra set of channels left over to go active up front!!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

hello sean, captain! hope all is well! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

That sucks, what a retarded reason to do something. It sounds like it will just postpone the inevitable. it's all good. i've got an offer at a local finance place, as an assisitant manager. money isn't great, but with overtime and mileage, i'll do ok. i'll have a week to find something else too, lol. so a bit of a vacation. thinking fo starting my own local shop. concentrate on online box builds and some easy local stuff.some h/u plus 4s, prefabs and subs, stuff like that. make it where i keep minimal inventory, you bring it, i install it. or i'll order what you want. concentrate on not selling anything namebrand, save for head units and speakers. there's an old 3 bay gas station in town, right on the main drive, no real residential neighbors, that i can lease for $600 a month. needs some renovation, but it's available. now i just need a bit of fundage, lol. just got back from a nice bike ride. i love a nice sunday afternoon jaunt! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

oh shit, forgot too mention, i got laid off yesterday, lol. seems it's time to re-up his workman's comp insurance, and we had one too many employees. and he let me go so that maybe he'll get the bug to come into work on time adn actually give a shit again. seems that having me there meant he didn't have to be, because he knew i would be on time, could run the store and take care of things. so letting me go means he's got responsibilty again, lol. end of summer, no more radio activity. end of september, latest. fuck, it's humid. time for a sam adams, lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i need to know the mounting depth of both, as well as mounting diameter and overall outside diameter. i looked at the SI website and can't find it. i've also used our search feature to no avail. thanks ahead of time. oh, and sub displacement would be nice too. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Kent, it's aluminum, so it shouldn't take anymore than 15-20ft.lbs. for proper torquing. That's considerably less than you are able to do just by hand, so as long as you tightented them tight, it should be good. It definately sounds like a leak though. The only cause I could see is a bad gasket as it's impossible to screw up its orientation. I guess the plenum or intake could possible be warped as well, but I don't think aluminum warps. Make sure you check your vacuum hoses as well. This could also be the problem and I am guessing it IS the problem. A small leak could be a killer. all vacuum hoses that were plugged off/attached, are still the same. (all emisions were removed from this car), but i'll go over them again. i'm thinking of removing the intake again, adn reinstalling it. that way i can make sure of both vacuum attachments and bolt tightness. aluminum can warp, lol. maybe that's not the technical term, but one can do it if not tightened evenly for instance. which could be the culprit as well, i guess. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee