mrray13

can't wait to see the results of this. looks beefy. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Ok folks, here it is! The Mach5 Maw12 vs. the rD Classic 12 showdown! I want to thank Mark from Mach5 and Kevin From Low-hz, with a shout out to Steve from rD, for providing the subs. It ahs been fun, and it has been a learning experience. Nothing better then playing with new toys. Ok, on with the setup. The vehicle is a 2004 Chevy Silverado extended cab. There is a yellow top under the hood, 1/0 Memphis wiring throughout, and a factory 105 amp alternator. The Big 3 has been done as well, also in 1/0. The source unit is a Clarion DXZ955MC, with the HPF set to 125 and the LPF set to 80. The amplification is provided by a Memphis Memphis Belle, MCH1300, which will provide these two subs ~600wrms @ 2ohm. The gains are set to just clipping using an o-scope and a 50hz note. Enclosures will be a 1.25ft^3 sealed affair, and a 2ft^3 @ 34hz w/a 4

sweet...way to go visitor..hehe i'm proud of you. now, we need a link to the mma guy getting his eass whipped, hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

It is hard too as if they can't cast where you tell them, they can't put the right action on the baits, and the last thing I want to do is boat 10 and have them 0 out. The other way around would actually be fine to me, I don't mind if I don't catch if they are having a blast. I can fish vicariously through others. Now if I am fishing with someone who can fish, the story will flip. In that case, I want to outfish them i could care less if i'm outfished, lol. even if a last minute draftee, i just like to go for the hell of it. catching fish is an after thought, just being out on a lake wqith a good friend and a beer, that's all i need. of course it doesn't hurt to catch a few, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

very nice neil. it's nice to see a non-basshead write a review. very detailed, very informative. i enjoyed it. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the problem is, no two vehicles are exactly the same. pulling down your visors will change things. adding a dahsmounted gps will change things. seats upright or laid back, all of those affect what a meter will read at the dash. aneon hit the nail right on the head. if nothign else, seal up your current box (will make for a pretty accurate reading seeing it's the exact same box in the exact same location), grab your tones and a meter. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

http://cyvforums.com/index.php?topic=594.0 to promote one of our sister sites.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i'm here, i'm here!! oh, and he pm'd me too, lol. and i honestly agree with tirefryr, i've never had an issue with mtx. sub wise i'd stay at the 7500 series or higher. and i miss their old 1501d. that was a pretty good bruiser. otherwise, look into the ssa icon, the maw12 (depending upon power), teh sundown line up of amps. not too mention soundsplinter's rl-p and the Fi lineup. there is so much good shit here, lol, it's hard to name it all. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

loving it. not the best money, but it has good benefits, and the damn thing is easy. i get $0.485 a mile to drive my vehicle, on top of the hourly wage. with less then an 80 hour check and mileage, i've put over $1k in the bank the last two weeks (again, not great, but if i can net $20k a year, i'm happy). and the overtime doesn't feel like like overtime. i put in just over 50 hours lastweek, felt like 30. i will do some training the next two days in a town 50 miles away, one direction, lol. so i'll make ~$100 this week minimum just driving to and from work, lol. and i get my mileage check every friday, paycheck every two weeks, benefits will be $88 every two weeks for medical and dental, for the family. and that's not counting quarterly bonus's, hehe. yeah, i don't mind cleaning up for this kind of job. and i've completed one phase of training, which is good for a fifty cent raise, and i've started the second phase. so by the time my probation is up, i'll have an $1 an hour raise. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

all that stainless, i didn't see the extended slide release. that's all i want to add to my kimber. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the hellboy, by pictures, doesn't appear to be that big. i want the plans too, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the big three is easy enough... what kind of truck do you have? but basicly, you run an extra wire from the alternator to the positive battery post. you run an extra ground from the negative post to the chassis and another extra wire from the negative post to the engine. if you're game enough, you can also chase down the factory engine to chassis, and upgrade that one as well. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yeah, two 8's SEALED!! lol... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

T.O.P. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i don't recall the model number, but pioneer has a double din in dash 6 disc changer/dvd player that looks exactly like the d3. it's a pimp ass unit i wanted to put in the trailblazer for the wifey, but she wouldn't let me spend the money i'll try and dig up a model number. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee http://www.electronicsbonanza.com/comersus...er-AVH-P6800DVD that's it!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

shouldn't need to touch the frame for an extended hump grip safety. when you do the combat style hammer, macke sure the grip safety/beavertail is notched for it. don't forget to add an extended slide release and thumb safety, melt the edges and you'l have a pimp ass 1911. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i don't recall the model number, but pioneer has a double din in dash 6 disc changer/dvd player that looks exactly like the d3. it's a pimp ass unit i wanted to put in the trailblazer for the wifey, but she wouldn't let me spend the money i'll try and dig up a model number. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

nice!!! that's a sweet score indeed! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

damn. Do you have to have sound deadening and all that to achieve high db numbers? I'd like to see what mine does, I know MrRay13 did 132, but I'm not sure what kind of deadening he has and so forth. The ICON is making a name for itself real quick. -John i've got deadening on my roof and that's about it. save a little in each door. troy, you want that ssaudio guy banned? jsut say the word bro!! hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

just having the "wnat" is a good first step. here's a few quick tidbits.. don't be afraid to fail. if it doesn't work, try again. learn from it and try again. (i was going to quote edison and his lightbulb statment, but it failed me, lol) don't be afraid to ask questions. that's why we are here. don't be afraid of constructive critism. we only get harsh if you fail to respond, lol. most of us have been there and tried that. so when we say that way sucks, it's not to cut you down personally. it's just that one of us has probably tried it and it just didn't work. and never think you know it all. it just doesn't happen. most of the really smart ones around here are always learning. and aren't afraid of someone teaching them. and like ///M5 said, nothing can replace hands on. take shawn up on his offer. watch and learn, get your hands dirty. it's addicting though, lol...so be careful!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i'm not at all famaliar with that amp. what's it's rating at 4 ohm? but to throw a suggestion out there, look into kicker's new cvt lineup. at 4 5/16" of an inch deep, 400wrms power handling and a MAP price of $179, you could get a 12". or a pair. and they come in either svc 4 or svc2. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

you cook it, lol... and like previously mentioned, don't point fingers at the amp. i know of several memphis amps that blew at 9 -10 volts. those people don't go online and blast they suck balls though. shit, that's the reason people preach electrical before amp.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

my god... now i'm arguing with peter_euro over at CAF because i used teh words "output potential is near the tops", when refering to my opinion about the rD classic sealed. (it was in rebuttal to him stating no rD sub would work sealed) now, everything (i must really be behind the times) HAS to be measured by klippel and in oreder ot have a valid opinion, one must validate his remarks with his own klippel measurements. (denim, get the ICOn on the klippel stat!!) wtf? http://www.caraudioforum.com/vbb3/showthre...age=2&pp=15 start on that page and read on.... oh yeah, and if you mention a specific sub, whether or not you're just talking about your personal experience with it, you must be pimping it. wow...it's time for me to go to bed adn get laid. lol.....i must be too old for this shit. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

thank you, but alas, it seems as though the fun is over. oh well, i'm sure another one will jump up soon enough.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

http://www.soundsolutionsaudio.com/forum/i...?showtopic=9449 let me know what you think! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee