mrray13

wife maybe.....but not hte kid.. sweet ass rides... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

a lot of us make boxes, but shipping them is $$$$.. gnomeaudio foums is just about that, that's what they are in business for....i believe u can get a price quote at www.gnomeaudio.com 97droptopz...never used a router in building ur box? wow....i always round off my corners and route out the ports..they look so much better... but, they aren't necessary... good luck in ur quest Twitch wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

looks like some fun, eh? hehe....i gotta go check this out.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

here ya go... sorry guys..hehe UC them now? hehe

that would be sweet... especially while on sale... giter done!!!!!!!! hehehahahaheheheheha wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

with mdf silly!! but for real, i need u to give me the max measurements where u are going to put this box. if it is a trunk, make sure that the max measurements allow u to put the box into the trunk, or u'll have to build a new box or build in the trunk. u'll also need to assemble a few items.... 1:a jigsaw (or router with a circle cutiing jig) to cut out the mounting spots for the subs 2: a router, for the above, and to route out ur port 3: a table saw or circular saw..to make ur pieces for the box....u can also have home depot/lowes make the cuts for u, u just take them the measurements 4: a cordless drill for screwing the box together..of course a brad gun and brads will also work. 5: screws..#6 drywall screws 1 1/2" long..or #16 brads 1 1/2" long (1 1/4" will also work) 6: liquid nails (wood glue will work) to glue the pieces together 7: various drill bits...one to drill the hole so u can route out the port and cut out ur sub mounts...one to pre-drill for ur screws that's the basics......after u give me (or anyone else who wants to help..hehe) ur max measurments, i'll give u the basic layout for u r box. and it starts...hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i'm lazy...i don't disconnect until it's time to hook up the fuse. i can usually wire one on in about an hour, unless seats come out. could be why i pop a fuse every now and again, eh? lmao.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

u really shouldn't post about ur boyfriends,ummmm, well, errrr...oh yeah...his johnson. most of us don't really need to know that he's that big..or maybe ur embellishing.... :ph34r: hehehahahahahahehehehehahahaha wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ok...now i'm real confused. i'm going tro copy this and put it in the fabrication section. i don't believe this is correct. why? there isn't anyway possible that volume can be in square anything..as square is 2 dimensional..ie height x length...or length x width..those will give u square. my backyard is 10000ft^2...u add in the 4 ft tall fence and the volume of my yard is 40000ft^3......1200in*1200in*48in/1728. does that make sense? and away we go.. hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

hmmmmmmm...... i like the leather in my wife's car...but it's not as humid up here, and they still got hot as hell.... with the suede, maybe it'll be cooler..and the perforated leather would help it breath... it sure as hell, would be cool as hell, as far as looks go!! but i think i'd just redo with a racing style bucket in a nice cloth.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

really? what equation? now i'm curious.....and confused wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

speaking of power 800.2's..i happen to have one for sale. say $75 plus shipping? yeah, it needs work. a dumbass person whom it was sold to tried to run it at 1.3 ohm mono. anyway, lemme know. was told it wouldn't cost more then a couple hundred to fix, but who knows? this surface mount board stuff is kinda ridiculas.. btw..they benched around 1100wrms? damn....it might not be for sale....hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee:slayer:

Vb=net internal volume of enclosure=cubic inches so if u have the cuft u'd multiply by 1728 to get cubic inches or divide the cuin by 1728 to get cuft. help ya some? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Darn. I was gonna say I have a local supplier of Audiopipe 1/0 kits. I could have gotten it for you pretty cheap i'll bite.... how cheap?? i need to upgrade...if the price is right..lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

agreed, that is some really nice work... sand, check out the showoff section..lots of my pic there! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Thanks, i usually use some kind of calculator so i always forget but that's to convert to cubic inches not square inches.. hopefully that's what u were after! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee:slayer:

:ph34r: agreed!! it's what i used to help him with the pioneer boxes..hehe as well as the ranger box i built a couple weeks ago!! but it's also nice to know some "regular oldfashioned" math to make sure...or just to play around with! but i like the "new" way better! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

damn...won't let me download the client..says the page is missing or something... keep us updated.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

3000wrms on a pair of subs rated for 300 a piece?? i guess i'll just shut my mouth for now on.. :ph34r: about how much power these things will take hmmmmmm, maybe i can get scott to loan me that mojo for the prix?? hehehahahehehaha wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i'm currently running an rl-p12 in a 1.25ft^3 sealed enclosure off a hifonics nemesis nx750d. it is an awesome sub! it gets loud, it gets low and it sounds great! the price helps as well, as it's competitive with anything out there. if ur wanting all out spl, these might not be the sub u want, and the power u've hinted at is a touch morre then mike would recommend in a vented enclosure. not that they couldn't handle it,i believe they would, mike would suggest that for the life of the sub, that wouldn't be a good choice. about 750 wrms is pretty close to max he'd recommend a piece in a vented enclosure. however, with that much power, they would indeed get ungodly loud! but since ur in no big hurry, around summer, fall of 2005, mike has hinted to a UC woofer, capable of handleing 2500-3000 wrms with ease! email mike@soundsplinter.com tell him what ur after, he'll get back to ya quick with an honest answer...he won't just say what u want to hear in order to sell his product! hope that helped.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee:slayer:

..yep u got lost...hehe the box i helped him design are for a 12" pioneer. he is going to build two seperate boxes for a pair of subs to sell individualy in order to buy the rl-p 15....hehe help some? i also like ur port formula....it is simpler to understand.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

extremely well...maybe not as loud as some..but definitely loud! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

u can never know too much! welcome to ssa! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

glad to see ya back! new toys? clarion joyride autopc, new truck, memphis subs (already going to change to a pair instead of one) new pr500d...new soundsplinter, new hifonics... yeah, i have a few..hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee