mrray13

car looks good, adn those rims really work on it. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the mains from a line boat, or tug as you put it, are the same as a trains main. some as little as 8 cylinders and 500hp, others as large as 16 cylinder and 4khp. and yep, him and rodney scrap out alot of them. jonesboro giving away land?? lol. well, then again, with our county goverment, enough money will get ya jsut about anything. so did the chicken motor come out of teh funny truck? i heard he had gotten rid of it, sunk a crap ton of money into building it. the brown truck never did over 750hp as i recall. like 750 isn't enough, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

well, alot of people will run a higher power amp, then gain down so that the amp/sub will never see clipping. and with such a minimal increase in power, one wouldn't have that option. with similiar power ratings, one would have to look at input signal to make sure the amp isn't reproducing an already clipped signal. and with you mentioning the peripheral unit, i would wager that at higher volumes that is what is happening. you are better off turning the loc "gains" down some and making up for it with the amp gains. the best bet is to use a 360 or cleansweep and up the voltage cleanly, if one is wanting to keep the stock h/u. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

**raises hand** only if we can do cars too i'm game. where we gonna be located?? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee If I was getting out I'd say Long island...............lots of people there with too much $$$ and nowhere good to waste it. J I was thinking around Anna, IL. thats where my boss's son is (Todd Suhling), and close to Kent, lord knows Todd has tools if we don't have something, plus he has a hell of a lot of cool toys. close?? lmao, same damn town. Todd Suhling is his name? he actually lives in jonesboro. which is attached to anna, but nonetheless, about 3 miles or so from where i live. did he happen to build a funny truck? a s-10 bodied funny car? <<< over 2500hp iirc and have another little brown s-10 he called mighty mite? <<<< 750hp and street legal that name surely sounds right. i'm out for a few wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee Yep, he also has a 700hp 67 firebird that is his play toy. Yea, he built Tiny Mite and Mighty Mite. I think that shit colored S-10 is the same one he started racing in highschool, his dad has some stories. i've not seen the chicken, but have seen the two trucks. i've talked to Todd a time or two. he's supposed to have a shop of all shops. pretty much build anything you want. he is, or was, a partner to a fellower named rodney wright, adn they did a bunch of scrapping for money. well, that and auto repair. small fucking world. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

going back to custom sign fabrication/welding. $3 an hour pay raise. plus another in 90 days. and i don't have to deal with the public. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

**raises hand** only if we can do cars too i'm game. where we gonna be located?? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee If I was getting out I'd say Long island...............lots of people there with too much $$$ and nowhere good to waste it. J I was thinking around Anna, IL. thats where my boss's son is (Todd Suhling), and close to Kent, lord knows Todd has tools if we don't have something, plus he has a hell of a lot of cool toys. close?? lmao, same damn town. Todd Suhling is his name? he actually lives in jonesboro. which is attached to anna, but nonetheless, about 3 miles or so from where i live. did he happen to build a funny truck? a s-10 bodied funny car? <<< over 2500hp iirc and have another little brown s-10 he called mighty mite? <<<< 750hp and street legal that name surely sounds right. i'm out for a few wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

June 9: Topeka 10: Lincoln 11: Ames 12: Sean's i might still make the get together, if i go just the last few days. i'll know for sure monday if i can go. damn the job change, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

**raises hand** only if we can do cars too i'm game. where we gonna be located?? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

what's the coils final impedence if paralleled? in series? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

did they change the ratings? i was going to mention the sundown in the original thread, but specs on the website said 400x1@4. eventually i want sundown power on the icon and on whatever mids/tweets i can grab from the forum. just gotta sell my other shit first, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

that's a minimal increase in power, but still well within what the rl-i can handle. not sure if it's going to be any cleaner. how is the current amp set? gain, boost, xover? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

what will final impedence be? what is the subs rms rating? 2-3 seconds tops at a time, unless it's just a beastly sub. my old id spls went for about 30 seconds free air before blowing (which is what we were after). but doing it in box will help. and take vids!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

depending upon your subs vc configuration, the 120 wall outlet is roughly 3500wrms@ 60hz and 4 ohm (iirc, might be 65) in any case, it would work. drop sub in box, wire as you for your amp(s), plug it in and go. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

That right there just goes to show the kind of companies that have forums here at SSA. Kudos to you for being willing to stand behind your product no matter what the reason. J if you had ever dealt with mike, you wouldn't expect anything less. that's all mike as ever been, all about the customer. it's amazing to think my rl-p is 4 years old, lol. i've never owned a sub that long! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the three amp idea would be the best, especially strapped. or one larger 5kwrs amp. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

thanks!! maybe you should post it for everyone. you might just get rich, lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Fi offers two options with their subs: 1. Universal: the tolerances in the gap are designed so that the sub can be reconed with either the D1 or D2 coils. 2. Non-Universal: the tolerances in the gap are designed specifically for a D1 or a D2 coil. To the OP, there will be very, very small differences between the two. Not something to really worry about, in my opinion. lol, thanks. i was wondering i f i had drank too much today..or been reading at da shithole too much. one or the other. i am a Fi no0b wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

huh? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

will definitely update. last night went through a basics type thing. learned a few basic drills in jiu jiustu (sp) and even grappled a bit. me thinks i'm going to like this, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Big gloves. those too wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

red crayon??? and nighttrain for the win!!! or sysco!! wooowhooooo!! cheap wind drunks FTMFW!!! i do miss those days. cuervo gold shots outa dixie cups. you could get two, maybe three shots per cup, before the bottom was "eroded". hehe.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee Do they still sell Sysco? you know, i don't know. i will look though. i've kinda got a craving for a cheap wine drunk. btw, i won't make the get together. i've changed jobs. so no vacation, i think. i'll ask them monday when i start if it will be ok, since it's planned, but as of now, i'm a no show. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

those 84s on the blue lincoln don't look right. need to be 100 or 120s. that sucks on the mustard and mayos. they for sure fit the lincoln as far as looks go. personally, i like the caprice that was shown earlier. while i would do a 20 max, those 24s aren't bad, and it's done in a very clean way. they are tucked, it's not hi-rided, and that goes a long way to making it look right. the color works too! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

just what 8s do you guys have?? damn, i'm outdated, lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

lol... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

shhhhhhhhh... damnit, lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee