mrray13

nice..lol... u do anymore testing with the box? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

nope...link? supa..u poser...u wish u could do that...and yep, they are called enddo's..the control he exhibited to do what he did is what's impressive... ed..i was wondering the same thing... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i'm here..but just for a minute...lol going to evenings this week so i thought i'd get into practise of going to bed a few hours later then normal... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

but i'll let you in on a secret....it's not just that your amp has power, but you're maxing out 250wrms subs with 400wrms...chances are, you're as loud as your going to get. like the picture i showed you earlier, i've done an almost identical setup, and trust me, those subs are giving you all they can if you've got your gains set to 400 per sub (before impedence rise of course..lol)... so be careful with that knob, or you'll be trying out memphis's warranty service... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

1: rl-p 12 2: 1.25ft^3 sealed, but loved it in ~2ft^3 tuned to 34hz 3: all types of music 4: up to 1200wrms, only needs about 750 to really get after it! 1: rl-i8 2: .75ft^3 tuned to ~36hz 3: again, all types of music 4: given it as much as 1700wrms, but does a great job off 500-600wrms in the rl-i's case, i think a slightly higher tuning (like 40-45hz) would be in order if crazy output was wanted. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

beat ya to it!! lol slow poke! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

if ur revs are dropping that much...time for a new batt and alt! no way around it! btw, what amps and how are the subs wired? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

lol...no...just some old pioneer thing that was given to me, so i gave it to him... my "tester" is a 12w0 in a pre-fab sealed box... but thanks for the compliments... and the screws....yeah, the screws. he didn't want the baffle to "blow" off from the power and such... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

too hard for me...lol good job jim wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

but i'm slowing down.....got other things to do... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i'm a cookin with gas now... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

wow....i'm wh0ring it up old skool... hehe who needs TF?? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

well, i actually don't need a second ajob...but i need to prioritize what i do need/want and start buying...or something... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

T.O.P. beyotchesssssssssssssssssssssssssssssss i>j0o wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

and i wanna repaint the motorcycle, do a different front wheel...maybe new grips,pegs and controls.... i need a second job... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i've got the one that made me money still sitting here, gotta ship it tomorrow... i've gotta redo the system in the truck and wire up the TB... and i don't have an amp for the sub(s) for the truck....or the highs... arrrgggghhhhhhhhhhhhhhhhhhhhhhhhhhh wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

also, i think i'm done building enclosures, except for basic rectangular ones...or ppl i know well. too much hassle involved for the lil money i make. hell, two outa the last three cost me money..... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ummmm...i have the CS and teh truck..but i live int he midwest....damn..i'm out... good morning wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ok..u trivia/ song buffs.... who sung "afternoon delight"? we got into a converstation about that yesterday...noone could remember... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

got a poker run this morning/afternoon... steve...good luckwith that strike bro, like kevin, i've been there. not quite as long as u two have, but still...i hope it goes well! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i did..hehe squeak...u need to pm me with some of those prices..namely the horns and the nd 10's... and good morning wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

can anyone tell me how to get car wax off a rough textured surface? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

kuijo...swapping gears isn't hard, but it takes patience. and a bearing press depending upon model....lol...be prepared to insert and remove carrier a few times to get the pattern right...there's other tips and stuff, but it's too early... good morning wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

40's and 50's have been hit on different mics using rl-p's (15's)..so they have the capability of getting loud. twice as loud as what u currently have? i have no clue. with the increased cone area and xmax, u should definitely be louder, but no clue as to how much, too many varibles... also, all frequencies should be reinforced as well as output. not just because of brand switch, but because ur increasing potential output...of course, the rl-p is a really nice sub, which tends to reproduce all frequencies strongely. and of course, enclosure is going to be a importance here as well (for the output as well) wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Not to jack the thread or anything but what would you rec as far as a SQ ported box for an RL-P 12, a bit bigger? I'm not sure I'm still toying around with making a transmission line for the Rl-p just for fun but I might put my IDMAX in that instead, since I just made a fiberglass box for my SS no, i wouldn't go any bigger. in fact, for sq, i'd just tune a bit lower, possibly. but only if ur midbass was strong. IME, tuning real low takes the output side of things outa the equation. when i did the 2.5ft^3 box tuned to 28hz, i honestly didn't like the sound or the output from the rl-p (or xxx for that matter), but when i slugged the box to get it up to 34-35hz, displacement dropped to 1.9-2ft^3...both sounded awesome. i know of a few ppl running about 2ft^3 tuned to 28hz and love it.. that's why i suggest the 2ft^3 box, it just seems to work well in it.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee