mrray13

hmmmm..no way i'd by eDuh...no matter how good it was...not off of ben anyway. maybe used from someone...but still..(and yeah, i know u like ur eDmo sub) the CMP looks good.... but if the new rl-i is as beefy as the old one....man, how could u not go that route...lol.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yeah..i'm curious too...i'd love to get a new one...give it some play time and then throw them at each other..lol... might just do that... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

this is damn near a sin..but i'm toying with the idea of selling my rl-i8....it's just sitting here doing nothing....and i don't know which is worse... just sitting here or selling it... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

jim, have u looked at my thread in general concerning a two way set up? if not...GO LOOK!!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

no pass out here...but ambored off my ass...lol.. sup jim? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

good morning and dennis, i too am constantly surfing ebay and the classifieds..lol... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i might have missed it.....is it common chambered? if so, what ur experiencing is normal.... if it's a divided box, then u have a leak between the chambers... but otherwise, i like scott's suggestions..u can pull it out and do the paper...or u can reseal while in car (if possible) wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

bah...both the re8 and the eDmo700 are weak.... here's a real lil sub.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

if ur ports are no deeper then 4" or so, they have u tuned in the mid 40's....that's why u can't reach teh lows... to add port length to ur current box would take away port area and increase the chances for noise. if i understood u, ur ports are 3.5" wide, 11.5" tall and 4" deep, correct? that gives ya about 80.5^2" of port (both ports)...if u tried to lengthen the port ,and for arguements sake, by usind ur left over .75" mddf..ur port sizes would be 2"x10" or 40^2" for both ports. if u tried that, ur port length would need to be roughly 5.25" long to bring ya down around 36hz.... what i would suggest, is that u try by using .5" mdf....that will give you a port size of 2.5" x 10.5" or 52.5^2" of port area between the pair. make them 8.75" long.... i would make a pair of port inserts and slide them in my current ports, and give them a listen. make them removeable and if u don't like them, toss them.....or then u have a daily port setup (the inserts) and a comp set up (the original ports) wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i think i'm going to stick with the tweets i picked out..they have a wider freq response. and i wanna hear what the chamber does for them...lol.. now, i need to figure out the enclosure size and tuning... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

just finished this about a week ago for bigboygrubbs (jim referred him)..it's ~ 2.5ft^3 tuned to 40hz with 42in^2 of port....it's the future home of a audioque HD 12" sub... quick coat of black just for no reason (he's going to linex the enclosure).... enjoy.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

the first spelling is correct..lol and lucky ass fonzi... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

sweetness...lol.. i need to look up those tweets u bought as well.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i've got one i'll sell ya... it's an 18 wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

jim...no biggie...jsut thought i'd point that out...lol... the IHoP is like the unofficial crapass.com mod back room...lol... and bling bling is hilarious! be afraid, be very afraid....lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yep, if you're only going to run one rl-i, teh mc500d will be perfect! (dunno where i got you were going to run a pair of them?? ) that box (.75ft^3 net sealed) should work wonderfully in your situation. however, a ported one will give more output with a slight loss of sq. if you can squeeze jsut a bit more airspace, i'd suggest about 1ft^3 tuned mid to high 30's (35-38hz) with roughly 15-20in^2 of port (if u go slot) or 4" round. you can always run the port almost entirely outside the enclosure if it will help ya get the space ya need. it sounds like you've got a good plan going and don't forget...we're suckas for pics!!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

this vid is 9 minutes long..and takes a bit to download...but it's worth it!!! can u say wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ??? man..i wish i could do that... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i think the sun out there fried a thing or two...lol... but i understand, it was repetitive..but still cool. we have a loose group of riders who do some of that, but not to the extent of control this guy demonstrated. the vert wheelies, the peelies and stuff... and the torque the ducati had....damn!! that bike is a monster...lol... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

good morning ed jim...linky no work for us none mods... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

did i say i made them?? uhhhhhh...nooooooooooo i'm not that talented. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

well, two issues... first, unless mike still has some single 4s available, the amp ur using (i'm thing the mclass 500d?) isn't going to work. u can however use either the m class 1000d(which i'd recommend) or the pr series 500d or 1000d..all three are stable to one ohm, which is what u'll need with a pair of dual 4 subs. or maybe a regulated amp (like the jl 500/1 or 1000/1, there are others, like pg) that will give u the power at 4 ohm, which ur vehicle will love ya for! second, .83ft^3, is that net before sub displacement, and per sub? if so, that'll give ya around .75ft^3 net per sub sealed and that's sweet! if that's not enough,u can do some loose polyfill and that'll help "gain" some internal volume. also, a low tuned ported box would be awesome. of course to me, that's about 36-38hz, and would require about 1ft^3 per sub after port and sub displacment. now for ur truck, if u don't mind losing a lil legroom, i know 2.5ft^3 ported can be attained, but u have to build up over the trim piece. so ported can be done. but it's not an easy box... f150 box i just completed thread but if ur after more sq then spl...do the sealed box and 1000wrms for the pair.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

what is the box tuned to? did they built exzactly to memphis specs? if so, they are tuned about 40hz. in which case a lower tuned box will help immensely. the enclosure i did is a common chamber 6ft^3 net box with ~62in^2 of port tuned to 36hz. it gets low. his ranger is basiclly falling apart on the inside. for the money, you have very nice subs. your box is the issue, not the subs as far as the lowlows go... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

and with that... i'm out... peace! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

it's official....lol.. i'm done making any enclosures that aren't of the rectangular variety (or a good friends).....and i'm not painting any... these last couple have stretched my patience and my pocketbook...so whilest i love doing it, i'm just not going to...lol..... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

damn e-thugs..lol... anyway, in that pic of the rear of the box, u can see the landscaping i alluded too a few weeks ago....3200pds of river rock shoveled by these two hands....my wife has got to quit the big projects... and i made the chairs u can see in the pic too... yep, i'm patting my own back..lol... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee