mrray13

the extremis have quite a bit more displacment don't they? as in xmax? these daytons have like 4.25mm..... i think with some good eq'ing...these things will really rock..i'm impressed a ton with the daytons..the tweeters sound good too, not overbearing at all, actually quite mellow and they are blended well... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

none that i could hear....tomorrow they go on the pioneer for a listening test... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

yeah, i do...even freeair, they had a tremendous amount of bass for what they are and the power they were getting! his radio just introduces way too much distortion, regardless of speaker used....i'm going to hook them up to the pioneer tomorrow just to listen to them some more! btw, those are ~.66ft^3 enclosures, tuned to ~40hz...it's a great combination! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

howdy folks... as steve as already seen...new pics in the show off section in the bookshelf stuff thread... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

WTF?? something is crossed somewhere...lol... good luck!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

and here's the finished product!!! they are 2db louder then the OEM pos's according to my RS meter. same songs, same mic location....i even did it with one of the new speakers sitting on the floor!!! anyway, on with the show.... one stained, one not..from the front and back....red mahagony stain (he likes it) everything installed.... what he had..... old vs new...and the new setup... while the new is head and shoulders better then the old, his radio sucks balls. so that will get replaced soon... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

lo..jim... anyway..i will probably being doing a pair of sectioned towers, with cryolite based tops for mids/highs (only sealed) with a vented bottom section to handle the lows.... ologyaudio is going to design a xo for me to use...YAY!! we shall see if the wifey will allow the purchase..hehe wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

tom..thanks for directing me to ologyaudio...he's being a real big help!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

that's just what he needs...lol... kinda a taste of his own medicine...but i'd wager he'd leave bad feedback quicker then chit wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i'm definitely going with the dayton rs mids/woofers... now to get a crossover right... does anyone know if the bb6p crossover designer is any good? or would the one's i posted work for now? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

well, he says he'll ship first.....maybe someone will buy and take a really long time to pay...lol... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

good morning yeah, i know, it's monday...lol.. and i'm on evenings again this week...yay.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

sweet... i'll try to get ahold of him later...i know our steve likes his as well... so this might just be the direction i take... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

and i'm gone... see ya.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i also just posted this at diyaudio, but i have to wait for moderation..lol.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

steve, jim, ryan and nick.... read this thread and help me out please, lol.... the h/t bug is starting to bite a bit..lol.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

he's out..lol.. anyway... here's a few things i'm looking at... crossovers... midrange/bass.. subwoofers... along with the planars posted above... now, with the drivers being 8ohm and the planars bieng 4ohm..the crossover is designed for 4/8 on the sub part, but is designed for 8 ohm on the mid/tweeter part, what can i expect the xover freq and slope to be? also, what will be the final load shown my reciever? thanks guys...lol.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

fixed scott nice review though! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

fonzi...lots to see...had a blast! due to my asthma, i wasn't allowed to go scuba diving.. thanks mike! though dreamy is a bit harsh....lol.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

all depends on budget allowed, space willing to give up, desired output/sq and power to use. otherwise.... funky pups boom like so!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

elias, it looks to be a trim panel....go back to page two, towards the top he has two pics.....one where u can see all around the sides of the amp and then one when u can't. going by that, he just cut and carpeted a trim panel the same size as the front of the enclosure and screwed/braded it to the baffle (my guess is screws, so as to make it removeable). as to cooling, the majority of hte heatsink is exposed, and the trim panel won't be sealed, so i would guess that unless she drive's it hard constantly, it should cool just fine. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ewwwwwwwwwwwww....flowers on ur comforter..... but for real, if u like the wrinkles, leave them. but i agree with everyone else...just stretch the fabric until they are gon...be a whloe lot nicer.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

It isn't illegal where Steve lives (Canada) ... ??? no copyright laws? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

and tom.... pirate this beyotch!!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

sand wipers?? and u talk about my "dry" humor.....lol.. but that is an intense pic! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee