-
Content Count
5,305 -
Joined
-
Last visited
-
Days Won
6
Everything posted by johnecon2001
-
They'll be fine together. 8v is usually the max unclipped voltage the deck will send.
-
That's pretty sweeeet
-
You could always experiment with Aero ports as well. Those would give you the ability to go external with them. Thus leaving the interior of the box free for just the subwoofer.
-
Those will be things you'll have to experiment with. Normally in trunk cars, sub and port back are the way to go. Also, In my past experience with L5/L7's, they generally like boxes on the larger spectrum of Kicker's recommended sizes.
-
Media Player Classic is another good player for that file container.
-
I see.
-
Yeah I think Im going to just have to sell it and ill probably go with an AQ HDC3. So much for SQ...
-
It's not glare necessarily that you see from the side.. kind of hard to explain, but it looks more like polarization. Either way, for the price, you can't go wrong. Samsung makes a good TV.
-
I guess not because the problem occurs like 5 times in a 30 minute continuous playing. They're still sounding great even at high volumes. Gain's set at 1 o'clock I'd still guess yes. There are different stages of blown. If you've checked your connections and everything is fine there... I'll stick to my guns and say you popped 'em. And simply placing your gain knob at "1 o'clock" is not setting your gains correctly.
-
First question, yes you can wire it in parallel with no problems. Second, no, this won't fry your alternator.
-
That has a lot to do with how your box is made and what your electrical consists of. If you're at .5 ohms and your voltage drops.. the subs and amp are going to get a little hotter than normal
-
Might have blown the mid. j/w how'd you set your gains?
-
1 ohm should be plenty. The DP's are pretty efficient buggers. but .5 wouldn't hurt if you have the electrical. Could always turn the gain down.
-
I see boobies in the 4th picture. mmm
-
The new Mag is NOT an SPL driver. Nothing close to one.
-
Ideally, you build the box to suit the woofers..
-
Did not get universal coil...Possible to change?
johnecon2001 replied to Mynameismcgyver's topic in General Fi
yep! -
The "X"con 12" prototype has arrived
johnecon2001 replied to Mark LaFountain's topic in Sound Solutions Audio (SSA®)
If you offer to buy a 100 of each, I am sure I can help to make it happen. what would u give ...ur 21" rims ... Sean's basically pointing out that there isn't a big enough market to support the investment into those oversize types of woofers. I'd expect SSA to offer 12", 15" and 18" at the max. Probably won't be a 10" since the motor is too big. -
I don't remember exactly, but here are the T/s specs to get you started http://web.archive.org/web/20051210090137/...rahmaSeries.htm
-
Slow leak somewhere would be my thought. Or perhaps the motor needs to be oiled.
-
amps that can run active?
johnecon2001 replied to joe dirte's topic in Amplifiers / Head Units / Processors / Electrical
All of them. Can you be more specific maybe? -
Ive heard from 2 separate people running 40.1s, that they used a toggle switch and hooked remote straight from battery ok? Still it's not required. Might have been mandated by their installs.
-
I would beg to differ this point. The Engine block to chassis is probably the most important. That's essentially the alternator ground point. Alternator grounds to the engine... where do you think it goes from there?
-
Ground wire length, how accurate is it?
johnecon2001 replied to shizzzon's topic in Amplifiers / Head Units / Processors / Electrical
It all comes down to resistance. Longer runs with thinner cable will raise the resistance. You can combat this by raising the gauge size. -
Channel separation and other amp. parameters
johnecon2001 replied to buggsson's topic in Amplifiers / Head Units / Processors / Electrical
Specs can be fabricated. You can't really look to them for guidance unless you're comparing two trusted brands. What's your budget like for this 4 channel amp?